... as they don't work as intended with -fPIC.
I did prefer them over *_end ones at the time because older gcc would
cause .L* symbols to be public, due to issuing .globl for all
referenced externals. And labels at the end of instructions collide
with the ones at the start of the next instruction, making disassembly
harder to grok. Luckily recent gcc no longer issues those .globl
directives, and hence .L* labels, staying local by default, no longer
get in the way.
Reported-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Wei Liu <wei.liu2@citrix.com>
Add tools/tests/xenstore for a framework to do tests of xenstore.
The aim is to test for correctness and performance.
Add a test program containing some tests meant to be run against any
xenstore implementation (xenstored, oxenstored, xenstore-stubdom).
It is using libxenstore for access to xenstore and supports multiple
tests to be either selected all or individually. All tests are using
/local/domain/<own-domid>/xenstore-test/<pid> as base for doing the
tests. This allows multiple instances of the program to run in
parallel.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Note that the adjustment to the mode_64bit() definition is so that we
can avoid "#ifdef __x86_64__" around the 64-bit asm() portions. An
alternative would be single asm()s with a conditional branch over the
(manually encoded) REX64 prefix.
Note that RORX raising #UD when VEX.VVVV is not all ones is matching
observed behavior rather than what the SDM says.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
libxc performs a lot of calculations for the xstate leaf when generating a
guests cpuid policy. To correctly construct a policy for an HVM guest, this
logic depends on native cpuid leaking through from real hardware.
In particular, the logic is potentially wrong for an HVM-based toolstack
domain (e.g. PVH dom0), and definitely wrong if cpuid faulting is applied to a
PV domain.
Xen now performs all the necessary calculations, using native values. The
only piece of information the toolstack need worry about is single xstate
feature leaf.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The tools that use kexec are asynchronous in nature and do not keep
state changes. As such provide an hypercall to find out whether an
image has been loaded for either type.
Note: No need to modify XSM as it has one size fits all check and
does not check for subcommands.
Note: No need to check KEXEC_FLAG_IN_PROGRESS (and error out of
kexec_status()) as this flag is set only once by the first/only
cpu on the crash path.
Note: This is just the Xen side of the hypercall, kexec-tools patch
to come separately.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Considering that we surface MPX to HVM guests, instructions we emulate
should also correctly deal with MPX state. While for now BND*
instructions don't get emulated, the effect of branches (which we do
emulate) without BND prefix should be taken care of.
No need to alter XABORT behavior: While not mentioned in the SDM so
far, this restores BNDn as they were at the XBEGIN, and since we make
XBEGIN abort right away, XABORT in the emulator is only a no-op.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
As xenstored now is always starting with an empty tdb data base there
is no need any longer to remove the file before starting xenstored.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Today xenstored tries to open a tdb data base file on disk when it is
started. As this is problematic in most cases the scripts used to start
xenstored ensure xenstored won't find such a file in order to start
with an empty xenstore.
A tdb data base file can't be used to restore all Xenstore state as
e.g. Xenstore watches are not kept in the tdb data base. The file is
meant to be used for debugging purposes after a xenstored crash only.
Instead of opening a Xenstore data base file found on disk always start
with an empty data base. This will avoid problems in case someone is
testing multiple xenstored versions without rebooting (which is not
supported but helps debugging in some cases).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When iterating through CPUID leaves to generating a policy, libxc will clip
itself at the hardcoded maxima, meaning that no data outside of the hardcoded
maxima are provided to Xen (in turn, causing Xen to return zeros if these
leaves are requested.)
The HVM code also clips the max_leaf data reported to the guest, but the PV
side didn't.
This results in a PV guest using the emulated CPUID, or via Xen using CPUID
faulting, to observe a max_leaf higher than the toolstack wants, although with
zeros being returned in the intervening leaves.
Fix the PV side to behave like the HVM side, and clip the max_leaf values in
leaf 0 and 0x80000000.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Longterm, pv_cpuid() and hvm_cpuid() will be merged into a single
guest_cpuid(), which is also capable of working outside of current context.
To aid this transtion, introduce guest_cpuid() with the intended API, which
simply defers back to pv_cpuid() or hvm_cpuid() as appropriate.
Introduce struct cpuid_leaf which is used to represent the results of a CPUID
query in a more efficient mannor than passing four pointers through the
calltree.
Update all codepaths which should use the new guest_cpuid() API. These are
the codepaths which have variable inputs, and (other than some specific
x86_emulate() cases) all pertain to servicing a CPUID instruction from a
guest.
The other codepaths using {pv,hvm}_cpuid() with fixed inputs will later be
adjusted to read their data straight from the policy block.
No intended functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Kevin Tian <kevint.tian@intel.com>
Commit 9e49dcf67f ("xenstore: add per-node generation counter) changed
the TDB layout, which - in order to not break older xenstored running
on the same system - need to be accompanied by a version bump.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Eliminate the mis-naming of 64-bit fields with 32-bit register names
(eflags instead of rflags etc). To ensure no piece of code was missed,
transiently use the underscore prefixed names only for 32-bit register
accesses. This will be cleaned up subsequently.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Currently HVM guests that use upstream qemu do not update xenstore's
availability entry for VCPUs. While it is not strictly necessary for
hotplug to work, xenstore ends up not reflecting actual status of
VCPUs. We should fix this.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
While doing archeology I found 38ce7ce3, we should make sure
debug_symbols is responsible for adding "-g" to CFLAGS.
Move adding "-g3" from being guarded by debug to being guarded by
debug_symbols.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
31d41d7b tried to make debug affect tools build only but failed to take
care of debug_symbols (which appends "-g" to CFLAGS).
Move both to tools/Rules.mk at once in this patch.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This is in preparation of eliminating the mis-naming of 64-bit fields
with 32-bit register names (eflags instead of rflags etc).
Note that the result is not fully consistent until after at least one
more patch is in place, primarily to limit patch size (by trying to not
touch the same line twice).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This involves protmode_load_seg() accepting x86_seg_none as input, with
the meaning to
- suppress any exceptions other than #PF,
- not commit any state.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Commit 26dbc93a ("libxl: Remove pointless hypercall from
libxl_set_memory_target") removed the call to xc_domain_getinfolist, but
it failed to notice that "info" was actually needed later.
Put that back. While at it, make the code conform to coding style
requirement.
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
That header file is not used. Removing it would avoid build error with
musl libc, which doesn't have that header file.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
[ wei: rewrote commit message ]
Acked-by: Wei Liu <wei.liu2@citrix.com>
To avoid build errors relating to missing declarations of ssize_t add
the appropriate header file to atomic.h.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The unsued variable 'struct stat stats' causes build errors in some
situations. As it isn't used just remove it.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit d6ac8e22c7 ("acpi/x86: define ACPI IO registers for
PVH guests") broke ARM64 build of mk_dsdt.c due to introduction
of XEN_ACPI_CPU_MAP[_LEN] macros that are needed only for x86
guests.
We could fix the build by dealing specifically with those macros
but since post-MADT code is not executed on ARM64 anyway we can
compile it for x86 only.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
At the moment the execution of xencommons is gated on the presence of the
privcmd device, but that's not correct, since privcmd is available to all Xen
domains (privileged or unprivileged). Instead of using privcmd use the
xenstored device, which will only be available to the domain that's in charge
of running xenstored, and thus xencommons.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
...because it's empty. While there also rename xendriverdomain_startcmd to
xendriverdomain_start in order to match the nomenclature of the file.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: fix up minor error ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
FreeBSD init scripts don't have /usr/local/{bin/sbin} in it's PATH, which
prevents `xl devd` from working properly since hotplug scripts require the set
of xenstore cli tools to be in PATH.
While there also fix the usage of --pidfile, which according to the xl help
doesn't use "=", and add braces around XLDEVD_PIDFILE.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
1. Use "r" to store return values from xc calls.
2. Don't initialise "rc" at the beginning of the function.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
AMD explicitly documents that namely FS and GS don't have their bases
cleared in that case, and I see no reason why guests may not rely on
that behavior. To facilitate this a new input field (the CPU vendor) is
being added.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Define VCPU available map address (used by AML's PRSC method)
and GPE0 CPU hotplug event number. Use these definitions in mk_dsdt
instead hardcoded values.
These definitions will later be used by both the hypervisor and
the toolstack (initially for PVH guests only), thus they are
placed in public headers.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
xc_doamin_getinfo returns >=0 in success path, and if there is no vnode
configured, that rc will be returned to caller, which indicates error.
Fix that by setting rc to 0 in success path.
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Re-use an existing stack variable (reducing stack footprint, which also
results in smaller code due to some stack accesses no longer needing a
32-bit displacement), at once using a union instead of casts. Also
switch to rex_prefix based conditionals instead of op_bytes ones.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This check for curses.h does not consider cross-compilation.
It only checks host paths.
Luckily, commit 65da491321
introduced proper configure checks for ncurses so we can
remove the redundant check in the Makefile.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Exit with 0 for success.
Exit with 1 for an error.
Exit with 2 if the operation should be retried for any reason (e.g. a
timeout or because another operation was in progress).
This allows a program or script driving xen-livepatch to determine if
the operation should be retried without parsing the output.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Wei Liu
Jan Beulich
Juergen Gross
Andrew Cooper
Eric DeVolder
He Chen
Boris Ostrovsky
Roger Pau Monne
Zhang Chen
Alistair Francis
Anshul Makkar
Edgar E. Iglesias
Ross Lagerwall