User can set max freq to specific cpu by
"xenpm set-scaling-maxfreq [cpuid] <HZ>"
or set max freq to all cpu with default cpuid by
"xenpm set-scaling-maxfreq <HZ>".
Set max freq with default cpuid will cause
segmentation fault after commit id d4906b5d05.
This patch will fix this issue and add ability
to set max freq with default cpuid.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Compile-tested-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Only attempt to restore from saved state if it exists.
Without this, oxenstored immediately exits with an exception if the
--restart option is provided but the state file is not present.
(The time-of-check to time-of-use race isn't a concern as oxenstored is
the only thing that should write the state file.)
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Christian Lindig <christian.lindig@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Previously, Domain.dump output the number of the local port
corresponding to each domain's event-channel. However, when oxenstored
exits, it closes /dev/xen/evtchn which causes the kernel to close the
local port (evtchn_release), so this port is no longer useful.
Instead, store the remote port. This can be used to reconnect the
event-channel by binding the original remote port to a fresh local port.
Indeed, the logic for parsing the stored state already expects a remote
port as it passes the parsed port number to Domain.make (via
Domains.create), which takes a remote port.
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Christian Lindig <christian.lindig@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Internally, paths are represented as lists of strings, where
* path "/" is represented by []
* path "/local/domain/0" is represented by ["local"; "domain"; "0"]
(see comment for Store.Path.t).
However, the traversal function generated paths like
[""; "local"; "domain"; "0"]
because the name of the root node is "". Change it to generate paths
correctly.
Furthermore, the function passed to Store.dump_fct would render the node
"foo" under the path [] as "//foo". Change this to return "/foo".
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Christian Lindig <christian.lindig@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Including whether we actually tried stealing a vCPU from
a given pCPU, or we skipped that one, because of lock
contention.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
A new device model wrapper is added for the newly introduced
DMOP - XEN_DMOP_map_mem_type_to_ioreq_server.
Since currently this DMOP only supports the emulation of write
operations, attempts to trigger the DMOP with values other than
XEN_DMOP_IOREQ_MEM_ACCESS_WRITE or 0(to unmap the ioreq server)
shall fail. The wrapper shall be updated once read operations
are also to be emulated in the future.
Also note currently this DMOP only supports one memory type,
and can be extended in the future to map multiple memory types
to multiple ioreq servers, e.g. mapping HVMMEM_ioreq_serverX to
ioreq server X, This wrapper shall be updated when such change
is made.
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
It being very very basic, also means this scheduler does
not need much support at the tools level (for now).
Basically, just the definition of the symbol of the
scheduler itself and a couple of stubs.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Currently setting altp2mhvm=1 in the domain configuration allows access to the
altp2m interface for both in-guest and external privileged tools. This poses
a problem for use-cases where only external access should be allowed, requiring
the user to compile Xen with XSM enabled to be able to appropriately restrict
access.
In this patch we deprecate the altp2mhvm domain configuration option and
introduce the altp2m option, which allows specifying if by default the altp2m
interface should be external-only or limited. The information is stored in
HVM_PARAM_ALTP2M which we now define with specific XEN_ALTP2M_* modes.
If external mode is selected, the XSM check is shifted to use XSM_DM_PRIV
type check, thus restricting access to the interface by the guest itself. Note
that we keep the default XSM policy untouched. Users of XSM who wish to enforce
external mode for altp2m can do so by adjusting their XSM policy directly,
as this domain config option does not override an active XSM policy.
Also, as part of this patch we adjust the hvmop handler to require
HVM_PARAM_ALTP2M to be of a type other then disabled for all ops. This has been
previously only required for get/set altp2m domain state, all other options
were gated on altp2m_enabled. Since altp2m_enabled only gets set during set
altp2m domain state, this change introduces no new requirements to the other
ops but makes it more clear that it is required for all ops.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Signed-off-by: Sergej Proskurin <proskurin@sec.in.tum.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Jan Beulich <jbeulich@suse.com>
c/s 92cf67888 "x86/emul: Hold x86_emulate() to strict X86EMUL_EXCEPTION
requirements" was appropriate for the hypervisor, but the fuzzer stubs didn't
conform to the stricter requirements. AFL is very quick to discover this.
Extend the fuzzing harness exception logic to raise exceptions appropriately.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
x86_emulates()'s is_branch_step() performs a speculative read of
IA32_DEBUGCTL, but doesn't squash exceptions should they arise. In reality,
this MSR is always available.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The correct prototypes for the hooks are to use enum x86_segment rather than
unsigned int. It is implementation specific as to whether this compiles.
assert() that the emulator never passes an inappropriate segment. The only
hook which may legitimately be passed x86_seg_none is invlpg().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The fuzzing harness conditionally disables hooks to test error paths in the
emulator. However, fuzz_emulops is a static structure.
c/s 69f4633 "tools/insn-fuzz: Support AFL's afl-clang-fast mode" introduced
persistent mode, but because fuzz_emulops is static, the clobbering of hooks
accumulates over repeated input, meaning that previous corpora influence the
execution over the current corpus.
Move the partially clobbered struct x86_emulate_ops into struct fuzz_state,
which is re-initialised from full on each call to LLVMFuzzerTestOneInput()
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
AFL has a measure of stability, where it passes the same corpus into the
fuzzing harness and observes whether the execution path changes from before.
Any instability in the fuzzing harness reduces its effectiveness, as an
observed crash may not reliably be caused by the original corpus.
In preparation to fix a stability bug, introduce struct fuzz_state, allocated
on the stack and passed around via struct x86_emulate_ctxt's data parameter.
Propagate ctxt into the helpers such as maybe_fail(), so the state can be
retrieved.
Move the previously-static data_{index,num} into struct fuzz_state.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
For control-flow changes, the emulator needs to perform a zero-length
instruction fetch at the target offset. It also passes NULL for the
destination buffer, as there is no instruction stream to collect.
This trips up UBSAN when passed to memcpy(), as passing NULL is undefined
behaviour per the C spec (irrespective of passing a size of 0).
Special case these fetches in fuzz_insn_fetch() before reaching data_read().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Long mode (or not) influences emulation behaviour in a number of cases.
Instead of reusing the ->read_msr() hook to obtain EFER.LMA, require callers
to provide it directly.
This simplifies all long mode checks during emulation to a simple boolean
read, removing embedded msr reads. It also allows for the removal of a local
variable in the sysenter emulation block, and removes a latent bug in the
syscall emulation block where rc contains a non X86EMUL_* constant for a
period of time.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Reviewed-by: Jan Beulich <JBeulich@suse.com>
With the SVM injection logic capable of doing its own emulation, there is no
need for this hardware-specific assistance in the common emulator.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
Include some useful "Utility" functions:
- CpupoolFindByName
- CpupoolMakeFree
Still need to implement the following functions:
- libxl_cpupool_rename
- libxl_cpupool_cpuadd_node
- libxl_cpupool_cpuremove_node
- libxl_cpupool_movedomain
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Ronald Rojas <ronladred@gmail.com>
Acked-by: Ian Jackson <ian.jackson@citrix.com>
Implement Golang enumeration of libxl_console_type
as ConsoleType
Implement the following libxl functions:
- libxl_console_get_tty
- libxl_primary_console_get_tty
Signed-off-by: Ronald Rojas <ronladred@gmail.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@citrix.com>
Add calls for the following Domain related functionality
- libxl_domain_pause
- libxl_domain_shutdown
- libxl_domain_reboot
- libxl_list_domain
Signed-off-by: Ronald Rojas <ronladred@gmail.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@citrix.com>
Implement Bitmap type, along with helper functions.
The Bitmap type is implemented interllay in a way which makes it
easy to copy into and out of the C libxl_bitmap type.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Ronald Rojas <ronladred@gmail.com>
Acked-by: Ian Jackson <ian.jackson@citrix.com>
Add calls for the following host-related functionality:
- libxl_domain_info
- libxl_domain_unpause
Include Golang version for the libxl_domain_info as
DomainInfo.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Ronald Rojas <ronladred@gmail.com>
Acked-by: Ian Jackson <ian.jackson@citrix.com>
Add calls for the following host-related functionality:
- libxl_get_max_cpus
- libxl_get_online_cpus
- libxl_get_max_nodes
- libxl_get_free_memory
- libxl_get_physinfo
- libxl_get_version_info
Include Golang versions of the following structs:
- libxl_physinfo as Physinfo
- libxl_version_info as VersionInfo
- libxl_hwcap as Hwcap
Signed-off-by: Ronald Rojas <ronladred@gmail.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@citrix.com>
Create a basic Makefile to build and install libxenlight Golang
bindings. Also add a stub package which only opens libxl context.
Include a global xenlight.Ctx variable which can be used as the
default context by the entire program if desired.
For now, return simple errors. Proper error handling will be
added in next patch.
Until we get configure support, disable it by default. It can be
enabled either by adding "CONFIG_GOLANG=y" to .config, or adding it to
the 'make' line.
Signed-off-by: Ronald Rojas <ronladred@gmail.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@citrix.com>
These records shouldn't be in a stream, but accidentally are. Warn about
them, but don't abort the verification.
While here, add a missing length check to the X86_PV_P2M_FRAMES record
checker.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
The code as written attempted to elide zero-content records, as such records
serve no purpose but come with a performance hit. Unfortunately, in the case
where the hypervisor reported max size is non-zero, but the actual size is
zero, the record is not elided.
This previously tripped up the sanity checks in the restore side of migration,
but as the underlying reasons for eliding the records in the first place are
still valid, fix the elision logic.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
The migration v2 save code was written to avoid sending data records with no
content, as such records serve no purpose but come with a performance hit.
The restore code sanity checks this expectation.
Under some circumstances (most notably, on AMD hardware with Debug Extensions,
and a PV guest kernel which is not using the feature), the save code would
generate a record with no content, which trips the sanity check in the restore
code.
As the stream is otherwise fine, tolerate these records and avoid failing the
migration.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Currently xc_translate_foreign_address() only checks for the PSE bit on
level 2 entries (that's 2 MB pages on x64 and 32-bit with PAE, and 4 MB
pages on 32-bit). But the Linux kernel sometimes uses 1 GB pages. This
patch fixes that, by checking the PSE bit on level 3 entries if the guest
has 4 translation levels (that means 64-bit guests only).
Signed-off-by: Cristian-Bogdan Sirb <csirb@bitdefender.com>
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
* 'staging' of git://xenbits.xen.org/people/konradwilk/xen:
Introduce the pvcalls header
Introduce the Xen 9pfs transport header
xen: introduce a C99 headers check
ring.h: introduce macros to handle monodirectional rings with multiple req sizes
tmem: Parse UUIDs correctly.
tmem: Fix tmem-shared-auth 'auth' values
tmem: By default to join an shared pool it must be authorized.
xen/libxc: Move TMEM_AUTH to XEN_SYSCTL_TMEM_OP_SET_AUTH
xen/libcx/tmem: Replace TMEM_RESTORE_NEW with XEN_SYSCTL_TMEM_OP_SET_POOLS
displif: add ABI for para-virtual display
GCC7 complains about a possible overflow/truncation in xenlockprof.
xenlockprof.c: In function ‘main’:
xenlockprof.c:100:53: error: ‘%s’ directive writing up to 39 bytes into a
region of size between 17 and 37 [-Werror=format-overflow=]
sprintf(name, "unknown type(%d) %d lock %s", data[j].type,
^~
xenlockprof.c:100:13: note: ‘sprintf’ output between 24 and 83 bytes
into a destination of size 60
sprintf(name, "unknown type(%d) %d lock %s", data[j].type,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
data[j].idx, data[j].name);
~~~~~~~~~~~~~~~~~~~~~~~~~~
This increases the size of name to 100. Not the most scalable solution,
but certainly the "cheapest", as it doesn't add dependencies for
asprintf.
Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
A simple
xl tmem-shared-auth -u 00000000-0000-000A-0000-000000000001 -A 0 0
resulted in uuid_low = 1 (correct) and uuid_high = 0 (umm?).
The issue was that for hex values above 'A' (or 'a') we forgot
to add 10.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The hypervisor code (tmemc_shared_pool_auth) since the inception
would consider auth values of:
0 - to disable authentication!
1 - to enable authentication for the given UUID.
The docs have it the other way around, so lets fix it.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
which surprisingly (or maybe not) looks like
XEN_SYSCTL_TMEM_OP_SET_POOLS.
This hypercall came about, as explained in docs/misc/tmem-internals.html:
When tmem was first proposed to the linux kernel mailing list
(LKML), there was concern expressed about security of shared ephemeral
pools. The initial tmem implementation only
required a client to provide a 128-bit UUID to identify a shared pool, and the
linux-side tmem implementation obtained this UUID from the superblock of the
shared filesystem (in ocfs2). It was
pointed out on LKML that the UUID was essentially a security key and any
malicious domain that guessed it would have access to any data from the shared
filesystem that found its way into tmem.
..
As a result, a Xen boot option -- tmem_shared_auth; -- was
added. The option defaults to disabled,
but when it is enabled, management tools must explicitly authenticate (or may
explicitly deny) shared pool access to any client.
On Xen, this is done with the xm tmem-shared-auth command.
"
However the implementation has some rather large holes:
a) The hypercall was accessed from any guest.
b) If the ->domain id value is 0xFFFF then one can toggle the
tmem_global.shared_auth knob on/off. That with a)
made it pretty bad.
c) If one toggles the tmem_global.shared_auth off, then the
'tmem_shared_auth=1' bootup parameter is ignored and
one can join any shared pool (if UUID is known)!
d) If the 'tmem_shared_auth=1' and tmem_global.shared_auth is
set to 1, then one can only join an shared pool if the
UUID has been set by 'xl tmem-shared-auth'. Otherwise
the joining of a pool fails and a non-shared pool is
created (without errors to guest). Not exactly sure if
the shared pool creation at that point should error out
or not.
e) If a guest is migrated, the policy values (which UUID
can be shared, whether tmem_global.shared_auth is set, etc)
are completely ignored.
This patch only fixes a) and only allows the hypercall to
be called by the control domain. Subsequent patches will
fix the remaining issues.
We also have to call client_create as the guest at this
point may not have done any tmem hypercalls - and hence
the '->tmem' from 'struct domain' is still NULL. Us calling
client_create fixes this.
Acked-by: Wei Liu <wei.liu2@citrix.com> [libxc changes]
Reviewed-by: Jan Beulich <jbeulich@suse.com> [hypervisor changes]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This used to be done under TMEM_RESTORE_NEW which was an hypercall
accessible by the guest. However there are couple of reasons
not to do it:
- No checking of domid on TMEM_RESTORE_NEW which meant that
any guest could create TMEM pools for other guests.
- The guest can already create pools using TMEM_NEW_POOL
(which is limited to guest doing the hypercall)
- This functionality is only needed during migration - there
is no need for the guest to have this functionality.
However to move this we also have to allocate the 'struct domain'
->tmem pointer. It is by default set to NULL and would be initialized
via the guest do_tmem() hypercalls. Presumarily that was the
initial reason that TMEM_RESTORE_NEW was in the guest accessible
hypercalls.
Acked-by: Wei Liu <wei.liu2@citrix.com> [libxc change]
Reviewed-by: Jan Beulich <jbeulich@suse.com> [hypervisor changes]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Currently in xc_interface_open, xch->fmem is not initialized
and in some rare case the code fails before ever assigning a value
to it.
I got this in master:
$ sudo ./xl/xl run
xencall: error: Could not obtain handle on privileged command interface: No such file or directory
Segmentation fault
This initializes the whole xch_buff to 0.
Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If ocaml.m4 didn't find ocamlopt, disable all the ocaml builds.
Currently our Makefiles do not work properly when the native code
compiler (`ocamlopt') is not available. In principle this should be
fixed to fall back to bytecode, but this is not a task for this stage
of the Xen 4.9 release.
Without this change, we cannot build on systems with only ocamlc.
That includes Debian jessie ARM64, as used on the new ARM64 hardware
in the Xen Project CI test lab.
When the Makefiles are fixed, this commit should be reverted.
Committers: Please rerun autogen.sh.
CC: Julien Grall <julien.grall@arm.com>
CC: Christian Lindig <christian.lindig@citrix.com>
CC: Jonathan Ludlam <Jonathan.Ludlam@citrix.com>
CC: David Scott <dave@recoil.org>
CC: Wei Liu <wei.liu2@citrix.com>
Tested-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Remove all unused functions from tdb.c. This will reduce code size of
xenstored and - more important - of xenstore stubdom.
tdb.c hasn't been updated to a newer version since its introduction in
2005. Any backport of bug fixes or update to a new version will need
major work, so there is no real downside to remove not needed code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The handling of transactions in xenstored is rather clumsy today:
- Each transaction in progress is keeping a local copy of the complete
xenstore data base
- A transaction will fail as soon as any node is being modified outside
the transaction
This is leading to a very bad behavior in case of a large xenstore.
Memory consumption of xenstored is much higher than necessary and with
many domains up transactions failures will be more and more common.
Instead of keeping a complete copy of the data base for each
transaction store the transaction data in the same data base as the
normal xenstore entries prepended with the transaction in the single
nodes either read or modified. At the end of the transaction walk
through all nodes accessed and check for conflicting modifications.
In case no conflicts are found write all modified nodes to the data
base without transaction identifier.
Following tests have been performed:
- create/destroy of various domains, including HVM with ioemu-stubdom
(xenstored and xenstore-stubdom)
- multiple concurrent runs of xs-test over several minutes
(xenstored and xenstore-stubdom)
- test for memory leaks of xenstored by dumping talloc reports before
and after the tests
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Instead of setting errno and returning true or false return the error
value directly.
In order to ensure all call sites have been changed according to the
modification rename the functions to xs_*.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
The use of seabios defconfig kills boot performance of Windows guests
because the default is for the int13 handler to use PIO when accessing
the emulated IDE device.
By instead using a canned configuration with the ATA settings overridden
to enable DMA access (and also wider PIO) boot performance is markedly
improved without the need to use a different (and possibly not supported)
device model.
This patch adds the canned configuration into tools/firmware and modifies
the Makefile rule to copy it into place.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
colo_merge_secondary_dirty_bitmap() unconditionally free()s the .data
member of its local xc_sr_record structure rec on its exit path.
However, if the initial call to read_record() fails then this member is
uninitialised. Initialise it.
Signed-off-by: Joshua Otto <jtotto@uwaterloo.ca>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Alistair Francis
Luwei Kang
Jonathan Davies
Dario Faggioli
Yu Zhang
Adrian Pop
Tamas K Lengyel
Andrew Cooper
Ronald Rojas
Cristian-Bogdan Sirb
Konrad Rzeszutek Wilk
Seraphime Kirkovski
Juergen Gross
Ian Jackson
Paul Durrant
Joshua Otto