Both SHDEPS_libxendevicemodel and SHDEPS_libxenhypfs have a bug by
adding $(SHLIB_xencall) instead of $(SHLIB_libxencall).
The former seems not to have any negative impact, probably because
it is not used anywhere in Xen without the correct $(SHLIB_libxencall)
being used, too.
Fixes: 86234eafb9 ("libs: add libxenhypfs")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Juergen Gross <jgross@suse.com>
Instead of xc_set_parameters() use xenhypfs_write() for setting
parameters of the hypervisor.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
The original build setup used a "fake GOPATH" in tools/golang to test
the mechanism of building from go package files installed on a
filesystem. With the move to modules, this isn't necessary, and leads
to potentially confusing directories being created. (I.e., it might
not be obvious that files under tools/golang/src shouldn't be edited.)
Get rid of the code that creates this (now unused) intermediate
directory. Add direct dependencies from 'build' onto the source
files.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
By default, if the go compiler is found by the configure script, build
the golang tools. If the compiler is not found, and --enable-golang was
not explicitly set, do not build to the golang tools.
The corresponding make variable is CONFIG_GOLANG. Remove CONFIG_GOLANG
from tools/Rules.mk since the variable is now set by configure in
config/Tools.mk.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: George Dunlap <george.dunlap@citrix.com>
This causes gcc (yes, and clang) to emit phony targets for each dependency.
This means that when a header file is deleted, the C files which *used*
to include it will no longer stop building with bogus out-of-date
dependencies like this:
make[5]: *** No rule to make target
'/home/dwmw2/git/xen/xen/include/asm/hvm/svm/amd-iommu-proto.h',
needed by 'p2m.o'. Stop.
Based on -MP post-dating -MP by many years it is assumed that the
behavior of -MP isn't the defualt just out of extreme caution. We're
sufficiently convinced that there are no undue side effects of this.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Running 'make distclean' under tools will currently result in:
tools/Rules.mk:245: *** You have to run ./configure before building or installing the tools. Stop.
This patch adds 'distclean', 'subdir-distclean%' and 'subdir-clean%' to
no-configure-targets, which allows 'make distclean' to run to completion.
Fixes: 00691c6c (tools: Allow to make *-dir-force-update without ./configure)
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wl@xen.org>
This also allows to run `make src-tarball` without first having to run
`./configure`.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Blktap2 is effectively dead for a few years.
Notable changes in this patch:
0. Unhook blktap2 from build system
1. libxl no longer supports TAP disk backend, with appropriate assertions
added and some code paths now return ERROR_FAIL
2. Tap is no longer a supported backend
3. Remove blktap2 entry from MAINTAINERS
A patch to remove blktap2 directory will come later.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The qemu build process is requiring the link path of Xen libraries
to be specified both with -L and -Wl,-rpath-link. Add the -L flag
to the local pkg-config files.
At the same time let the pkg-config files depend on the Makefile
creating them, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This reverts commit b435014517.
Due to the implementation of cc-option, the check is always true,
which means build for gcc that doesn't have -Og support is broken.
This patch can be reapplied once we have fixed cc-option.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
When building debug use -Og as the optimization level if its available,
otherwise retain the use of -O0. -Og has been added by GCC to enable all
optimizations that to not affect debugging while retaining full
debugability.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 448c03b3cb ("tools/xenstore: try to get minimum thread
stack size for watch thread") added a dependency to libdl to
libxenstore.
Add the needed flags to LDLIBS_libxenstore and the pkg-config file of
libxenstore.
Fixes: 448c03b3cb
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In practice, qemu opens a great many fds. Tracking them all down and
playing whack-a-mole is unattractive. It is also potentially fragile
in that future changes might accidentally undo our efforts.
Instead, we are going to teach all the Xen libraries how to register
their fds so that they can be neutered with one qemu call.
Right now, nothing will go wrong if some tries to link without
-ltoolcore, but that will stop working as soon as the first other Xen
library starts to register. So this patch will be followed by the
stubdom build update, and should be followed by a
MINIOS_UPSTREAM_REVISION updated.
Sadly qemu upstream's configuration arrangements are too crude, being
keyed solely off the Xen version number. So they cannot provide
forward/backward build compatibility across changes in xen-unstable,
like this one. qemu patches to link against xentoolcore should be
applied in qemu upstream so avoid the qemu build breaking against the
released version of Xen 4.10.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Use CONFIG_BLKTAP2 directly. There is no reason why one would want to
set LIBXL_BLKTAP2 separately as things stand.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Config.mk
MINIOS_UPSTREAM_REVISION } changed from tag to equivalent
QEMU_TRADITIONAL_REVISION } specific commit hash
QEMU_UPSTREAM_REVISION now tracking master again
README, xen/Makefile
Update version number
*/configure
Reran autoconf; only change is version number
tools/Rules.mk, xen/Kconfig.debug
Enable debug.
Reverts 229ff3125b "Use non-debug build for Xen 4.9".
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
blktap2 is optional, so there should be no pkg-config file requiring
xenblktapctl if it isn't enabled for the build.
Add a filter mechanism to tools/Rules.mk to filter out optional
libraries.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Create a basic Makefile to build and install libxenlight Golang
bindings. Also add a stub package which only opens libxl context.
Include a global xenlight.Ctx variable which can be used as the
default context by the entire program if desired.
For now, return simple errors. Proper error handling will be
added in next patch.
Until we get configure support, disable it by default. It can be
enabled either by adding "CONFIG_GOLANG=y" to .config, or adding it to
the 'make' line.
Signed-off-by: Ronald Rojas <ronladred@gmail.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@citrix.com>
libgnttab contains the complete gntshr support, but the tools build
infrastructure contains dedicated support for gntshr _and_ gnttab.
Remove the gntshr specific flags and switch their users to gnttab
instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Recent changes to create *.pc files introduced a bug when trying to
build a library from a directory below tools as PKG_CONFIG_DIR wouldn't
be set. Correct this by adding a default value to Rules.mk.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Some libraries require different compiler-flags when being used in a
local build compared to a build using installed libraries.
Reflect that by supporting local cflags variables in generated
pkg-config files. The local variants will be empty in the installed
pkg-config files.
The flags for the linker in the local variants will have to specify
the search patch for the library with "-Wl,-rpath-link=", while the
flags for the installed library will be "-L".
Add needed directory patterns.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
LDLIBS_* and SHLIB_* settings in tools/Rules.mk are sometimes missing
some SHDEPS_* added to them.
Add the missing flags, even if sometimes being empty.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 78fb69ad9 ("tools/Rules.mk: Properly handle libraries with
recursive dependencies.") introduced a copy and paste error in
tools/Rules.mk:
LDLIBS_libxenstore and SHLIB_libxenstore don't use SHDEPS_libxenstore
but SHDEPS_libxenguest. This will add a superfluous dependency of
libxenstore on libxenevtchn.
Correct this bug.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
A typo was made in 7a6de259f.
Currently libxlutil lives in the same directory as libxl, fixing this
issue causes no functional change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
When configuring the build of qemu the configure script is building
various test programs to determine the exact version of libxencontrol.
Instead of a try and error approach needing updates for nearly each
new version of Xen just provide xencontrol.pc to be used via
pkg-config.
In the end we need two different variants of that file: one for the
target system where eventually someone wants to build qemu, and one
for the local system to be used for building qemu as part of the Xen
build process.
The local variant is created in a dedicated directory in order to be
able to collect more pkg-config files used for building tools there.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We are about to split out xl (which depends on libxlutil) to a different
directory. Provide the proper options for compiling and linking in
Rules.mk, and replace the hardcoded string in libxl/Makefile.
No functional change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch extracts all functions resulting in a dm_op hypercall from
libxenctrl and moves them into libxendevicemodel. It also adds a compat
layer into libxenctrl, which can be selected by defining
XC_WANT_COMPAT_DEVICEMODEL_API to 1 before including xenctrl.h.
With this patch the core of libxendevicemodel still uses libxencall to
issue the dm_op hypercalls, but this is done by calling through code that
can be modified on a per-OS basis. A subsequent patch will add a Linux-
specific variant.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
The new xendevicemodel library is intended to be used by all Xen device
models such that the only hypercall that use will be the dm_op hypercall
added by commit 524a98c2.
This patch adds the boilerplate for the new library, with only open() and
close() entry points, and calls to those from libxenctrl in preparation
for the compat layer added by a subsequent patch.
[ Also: update MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION
to the commits with the corresponding changes to those other trees
- Ian Jackson ]
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
While doing archeology I found 38ce7ce3, we should make sure
debug_symbols is responsible for adding "-g" to CFLAGS.
Move adding "-g3" from being guarded by debug to being guarded by
debug_symbols.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
31d41d7b tried to make debug affect tools build only but failed to take
care of debug_symbols (which appends "-g" to CFLAGS).
Move both to tools/Rules.mk at once in this patch.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The debug option in Config.mk affects hypervisor, tools and stubdom by
appending different flags to CFLAGS. Mini-os under extra is not
affected because it already has its own build system when it is
separated from xen.git.
It is undesirable because now hypervisor build is affected by both
Kconfig and debug.
Disentangle the semantics of debug by pushing relevant options to
individual sub-systems.
For hypervisor, the flags previously added by debug option is now
controlled by CONFIG_DEBUG.
For tools, flags are moved from config/*.mk into tools/Rules.mk.
For stubdom, because it unilaterally sets debug=y before including
top-level Config.mk, we only need to move the debug build set of flags
into stubdom Makefile.
Specifically there are some considerations on what flags are picked:
1. we don't need -fno-optimize-sibling-calls anymore because gcc doc
indicates that it is not enabled for -O1, which we already set in the
debug build.
2. for tools we use -O0 -g3 in Rules.mk because they already take
precedence over the flags set in config/*.mk.
3. for hypervisor we don't add -fno-omit-frame-pointer to debug build
because that's controlled by CONFIG_FRAME_POINTER.
This patch doesn't intend to tune those flags, but to provide identical
set of effective flags as before. The debug option in Config.mk will
only affect tools components after this patch is applied.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Blktap2 is effectively dead code for a few years.
Notable changes in this patch:
0. Unhook blktap2 from build system
1. Now libxl no longer supports TAP disk backend, appropriate assertions
are added and some code paths now return ERROR_FAIL
2. Tap is no longer a supported backend in doc
3. Remove relevant entries in MAINTAINERS
A patch to actually remove blktap2 directory will come later.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: George Dunlap <George.Dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Without this some ld versions warn about not being able to find
libxentoollog.so.1 when linking libxenvchan.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently __XEN_TOOLS__ is defined in the global CFLAGS used for tools
builds, exposing them all to the various unstable hypercall interfaces.
However there are places where we do not want this (in particular all
the stable libraries now under tools/libs), and there is a risk of
such uses slipping in unnoticed (currently there are none, but I
tripped over the mixed nature of the HVMOPs just now in some new code
I was putting together).
Instead only define __XEN_TOOLS__ for things which explicitly want the
unstable APIs. The vast majority of these are consumers of libxenctrl,
which have opted into unstable interfaces by using libxenctrl already,
so adding -D__XEN_TOOLS__ to CFLAGS_libxenctrl covers these without
needing to patch the dozen or so tools manually.
The libxc build itself, which doesn't use CFLAGS_libxenctrl, now needs
the define too. As does gdbsx's own low level hypercall binding
library xg.
hvmloader no longer needs to undefine the symbol.
The ocaml evtchn bindings don't actually need sysctl.h and therefore
don't actually need __XEN_TOOLS__ either.
qemu-xen-traditional doesn't use CFLAGS_libxenctrl and so we pass the
define there (via --extra-cflags) too.
Having removed __XEN_TOOLS__ replace it with
__XEN_INTERFACE_VERSION__=__XEN_LATEST_INTERFACE_VERSION__ so that in
tree code is always using the latest APIs.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
libxenforeignmemory will provide a stable API and ABI for mapping
foreign domain memory (subject to appropriate privileges).
The new library exposes an interface equivalent to
xc_map_foreign_memory_bulk, which all the other
xc_map_foreign_memory_* functions (which remain in libxc) are
implemented in terms of.
Upon request (via #define XC_WANT_COMPAT_MAP_FOREIGN_API) libxenctrl
will provide a compat API for the old names. This is used by qemu-xen
and qemu-trad as well as various in tree things (which required
de-dupping various #includes in some too to get the #define before the
first).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
libxencall will provide a stable API and ABI for calling hypercalls
(although those hypercalls themselves may not have a stable API). As
well as the hypercall buffer infrastructure needed in order to safely
provide pointer arguments to hypercalls.
libxenctrl encapsulates a instance of this interface, so users of that
library are not currently subjected to any actual changes. However all
hypercalls made internally by libxc now use the correct interface. It
is expected that most users of this library will be other libraries
providing a higher level interface, rather than applications directly.
Only the basic functionality to allocate hypercall safe memory is
moved, the type safe stuff and bounce buffers remain in libxc.
Note that the functionality to map foreign pages using privcmd is not
yet moved, meaning that an xc_interface will now contain two open
privcmd file descriptors. Foreign memory mapping is logically separate
functionality and will be moved into its own library.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
libxengnttab will provide a stable API and ABI for accessing the
grant table devices.
The functions are moved into the xengnt{tab,shr} namespace to make a
clean break from libxc and avoid ambiguity regarding which interfaces
are stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_GNTTAB_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few grant table related functions which go via privcmd
(GNTTABOP) rather than ioctls on the /dev/xen/gnt* devices in
libxenctrl. Specifically:
- xc_gnttab_get_version
- xc_gnttab_map_table_v1
- xc_gnttab_map_table_v2
- xc_gnttab_op
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
After this change libxenvchan no longer needs to link against
libxenctrl. It still needs xenctrl.h in one file for xen_mb and
friends.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
Using the same rune as we use for the Xen public headers, except we do
not need stdint.h here.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
libxenevtchn will provide a stable API and ABI for accessing the
evtchn device.
The functions are moved into the xenevtchn namespace to make a clean
break from libxc and avoid ambiguity regarding which interfaces are
stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_EVTCHN_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few event channel related functions which go via privcmd
(EVTCHNOP) rather than ioctls on the /dev/xen/evtchn device in
libxenctrl. Specifically:
- xc_evtchn_alloc_unbound
- xc_evtchn_reset
- xc_evtchn_status
Note that xc_evtchn_alloc_unbound's functionality is also provided by
xenevtchn_bind_unbound_port() (née xc_evtchn_bind_unbound_port) and is
probably redundant.
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels. QEMU does use these in hw/xenpv/xen_domainbuild.c but
that is a "toolstack use".
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
Juergen Gross
George Dunlap
Marek Marczykowski-Górecki
Nick Rosbrook
David Woodhouse
Paul Durrant
Anthony PERARD
Wei Liu
Ian Jackson
Doug Goldstein
Ross Lagerwall
Ian Jackson
Petre Pircalabu
Julien Grall
Ronald Rojas
Paul Durrant
Jan Beulich
Ian Campbell