ARM does not (currently) support migration, so stop offering tasty looking
treats like "xl migrate".
Apart from the UI improvement my intention is to use this in osstest to detect
whether to attempt the save/restore/migrate tests.
Other than the additions of the #define/#ifdef there is a tiny bit of code
motion ("dump-core" in the command list and core_dump_domain in the
implementations) which serves to put ifdeffable bits next to each other.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Avoid freeing info then returning it to the caller.
This is XSA-88.
Coverity-ID: 1056192
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Guests are initially started with caches disabled and so we need to make sure
they see consistent data in RAM (requiring a cache clean) but also that they
do not have old stale data suddenly appear in the caches when they enable
their caches (requiring the invalidate).
This can be split into two halves. First we must flush each page as it is
allocated to the guest. It is not sufficient to do the flush at scrub time
since this will miss pages which are ballooned out by the guest (where the
guest must scrub if it cares about not leaking the pagecontent). We need to
clean as well as invalidate to make sure that any scrubbing which has occured
gets committed to real RAM. To achieve this add a new cacheflush_page function,
which is a stub on x86.
Secondly we need to flush anything which the domain builder touches, which we
do via a new domctl.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Cc: keir@xen.org
The test programs were getting the proper libxenlight.so on their link
line. Filter it out. Also change the soname of the test library to
match the real one, so that libxutil is satisfied with it.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Olaf Hering <olaf@aepfle.de>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
We need to include the new TEST_PROG_OBJS and LIBXL_TEST_OBJS in the
appropriate dependencies. Otherwise we risk trying to build the test
program before gentypes is run.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Olaf Hering <olaf@aepfle.de>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
The remote (hostile) process can set ring buffer indices to any value
at any time. If that happens, it is possible to get "buffer space"
(either for writing data, or ready for reading) negative or greater
than buffer size. This will end up with buffer overflow in the second
memcpy inside of do_send/do_recv.
Fix this by introducing new available bytes accessor functions
raw_get_data_ready and raw_get_buffer_space which are robust against
mad ring states, and only return sanitised values.
Proof sketch of correctness:
Now {rd,wr}_{cons,prod} are only ever used in the raw available bytes
functions, and in do_send and do_recv.
The raw available bytes functions do unsigned arithmetic on the
returned values. If the result is "negative" or too big it will be
>ring_size (since we used unsigned arithmetic). Otherwise the result
is a positive in-range value representing a reasonable ring state, in
which case we can safely convert it to int (as the rest of the code
expects).
do_send and do_recv immediately mask the ring index value with the
ring size. The result is always going to be plausible. If the ring
state has become mad, the worst case is that our behaviour is
inconsistent with the peer's ring pointer. I.e. we read or write to
arguably-incorrect parts of the ring - but always parts of the ring.
And of course if a peer misoperates the ring they can achieve this
effect anyway.
So the security problem is fixed.
This is XSA-86.
(The patch is essentially Ian Jackson's work, although parts of the
commit message are by Marek.)
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
When a timeout has occurred, it is deregistered. However, we failed
to record this fact by updating etime->func. As a result,
libxl__ev_time_isregistered would say `true' for a timeout which has
already happened.
It is necessary to clear etime->func before the callback, because the
callback might want to reinstate the timeout, or might free the etime
(or its containing struct) entirely.
The results are that we might try to have the timeout occur again
(causing problems for the call site), and/or corrupt the timeout list.
This fixes the timedereg event system unit test.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Bring together the two places where etime->func() is called into a new
function time_occurs. For one call site this is pure code motion.
For the other the only semantic change is the introduction of a new
debugging message.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Test timeout deregistration idempotency. In the current tree this
test fails because ev->func is not cleared, meaning that a timeout
can be removed from the list more than once, corrupting the list.
It is necessary to use multiple timeouts to demonstrate this bug,
because removing the very same entry twice from a list in quick
succession, without modifying the list in other ways in between,
doesn't actually corrupt the list. (Since removing an entry from a
doubly-linked list just copies next and back from the disappearing
entry into its neighbours.)
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
We provide a new LIBXL_TESTS facility in the Makefile.
Also provide some helpful common routines for unit tests to use.
We don't want to put the weird test case entrypoints and the weird
test case code in the main libxl.so library. Symbol hiding prevents
us from simply directly linking the libxl_test_FOO.o in later. So
instead we provide a special library libxenlight_test.so which is used
only locally.
There are not yet any test cases defined; that will come in the next
patch.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Use the new libxl__pipe_nonblock and _close functions, rather than
open coding the same logic. Now the pipe is nonblocking, which avoids
a race which could result in libxl deadlocking in a multithreaded
program.
Reported-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Break out the pipe creation and destruction from the poller code
into two new functions libxl__pipe_nonblock and libxl__pipe_close.
Also change direct use of pipe() to libxl_pipe.
No overall functional difference other than minor differences in exact
log messages.
Also move libxl__self_pipe_wakeup and libxl__self_pipe_eatall into the
new pipe utilities section in libxl_event.c; this is pure code motion.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
--
v3: Mention that we switched pipe() -> libxl_pipe()
Previously, an application which had multiple libxl ctxs in multiple
threads, would have to itself plumb SIGCHLD through to each ctx.
Instead, permit multiple libxl ctxs to all share the SIGCHLD handler.
We keep a list of all the ctxs which are interested in SIGCHLD and
notify all of their self-pipes.
In more detail:
* sigchld_owner, the ctx* of the SIGCHLD owner, is replaced by
sigchld_users, a list of SIGCHLD users.
* Each ctx keeps track of whether it is on the users list, so that
libxl__sigchld_needed and libxl__sigchld_notneeded now instead of
idempotently installing and removing the handler, idempotently add
or remove the ctx from the list.
We ensure that we always have the SIGCHLD handler installed
iff the sigchld_users list is nonempty. To make this a bit
easier we make sigchld_installhandler_core and
sigchld_removehandler_core idempotent.
Specifically, the call sites for sigchld_installhandler_core and
sigchld_removehandler_core are updated to manipulate sigchld_users
and only call the install or remove functions as applicable.
* In the signal handler we walk the list of SIGCHLD users and write
to each of their self-pipes. That means that we need to arrange to
defer SIGCHLD when we are manipulating the list (to avoid the
signal handler interrupting our list manipulation); this is quite
tiresome to arrange.
The code as written will, on the first installation of the SIGCHLD
handler, firstly install the real handler, then immediately replace
it with the deferral handler. Doing it this way makes the code
clearer as it makes the SIGCHLD deferral machinery much more
self-contained (and hence easier to reason about).
* The first part of libxl__sigchld_notneeded is broken out into a new
function sigchld_user_remove (which is also needed during for
postfork). And of course that first part of the function is now
rather different, as explained above.
* sigchld_installhandler_core no longer takes the gc argument,
because it now deals with SIGCHLD for all ctxs.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
---
v3: Include bugfixes from "Fixup SIGCHLD sharing" patch:
* Use a mutex for defer_sigchld, to guard against concurrency
between the thread calling defer_sigchld and an instance of the
primary signal handler on another thread.
* libxl_sigchld_owner_libxl_always is incompatible with SIGCHLD
sharing. Document this correctly.
Fix "have have" error in comment.
Move removal of newly unused variables to previous patch.
v2.1: Provide feature test macro LIBXL_HAVE_SIGCHLD_SHARING
We are going to want introduce another call site in the final
substantive patch.
Pure code motion; no functional change.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
---
v3: Remove now-unused variables from sigchld_installhandler_core
We are going to change these functions so that different libxl ctx's
can share a single SIGCHLD handler. Rename them now to a new name
which doesn't imply unconditional handler installation or removal.
Also note in the comments that they are idempotent.
No functional change.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
This is the feature test macro for libxl_childproc_sigchld_occurred
and libxl_sigchld_owner_libxl_always_selective_reap.
It is split out into this separate patch because: a single feature
test is sensible because we do not intend anyone to release or ship
libxl versions with one of these but not the other; but, the two
features are in separate patches for clarity; and, this just makes
reading the actual code easier.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Applications exist which want to use libxl in an event-driven mode but
which do not integrate child termination into their event system, but
instead reap all their own children synchronously.
In such an application libxl must own SIGCHLD but avoid reaping any
children that don't belong to libxl.
Provide libxl_sigchld_owner_libxl_always_selective_reap which has this
behaviour.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
---
v2: Document the new mode in the big "Subprocess handling" comment.
Applications exist which don't keep track of all their child processes
in a manner suitable for coherent dispatch of their termination. In
such a situation, nothing in the whole process may call wait, or
waitpid(-1,,). Doing so reaps processes belonging to other parts of
the application and there is then no way to deliver the exit status to
the right place.
To facilitate this, provide a facility for such an application to ask
libxl to call waitpid on each of its children individually.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxl_sigchld_owner_libxl ought to have been mentioned in the list of
options for chldowner. Since it's the default, move the description
of the its behaviour into the description of that option.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Clarify that libxl_sigchld_owner_libxl causes libxl to reap all the
process's children, and clarify the wording of the description of
libxl_sigchld_owner_libxl_always.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This is a simple error-handling wrapper for waitpid. We're going to
want to call waitpid somewhere else and this avoids some of the
duplication.
No functional change in this patch. (Technically, we used to check
chldmode_ours again in the EINTR case, and don't now, but that can't
have changed because we continuously hold the libxl ctx lock.)
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
There have been ABI/API changes in libxc. Bump its MAJOR (which
affets libxenguest et al too.)
There have been ABI changes in libxl. Bump its MAJOR.
(The API changes have been dealt with as we go along - there is
already a LIBXL_API_VERSION 0x040400.)
None of the other libraries have changed their interfaces. I have
verified this by building the tools and searching the dist/install
tree for files matching *.so.*. For each library that showed up, I
did this:
git-diff RELEASE-4.3.0..staging -- `find tools/FOO/ -name \*.h`
where FOO is the corresponding source directory.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
The variable 'rc' is set to 1 at the top of xc_domain_restore, and for the
most part is left alone until success, at which point it is set to 0.
There is a separate 'frc' which for the most part is used to check function
calls, keeping errors separate from 'rc'.
For a toolstack which sets callbacks->toolstack_restore(), and the function
returns 0, any subsequent error will end up with code flow going to "out;",
resulting in the migration being declared a success.
For consistency, update the callsites of xc_dom_gnttab{,_hvm}_seed() to use
'frc', even though their use of 'rc' is currently safe.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: George Dunlap <george.dunlap@eu.citrix.com>
vcpu-set will try to use the HVM path (through QEMU) instead of the PV
path (through xenstore) for a PV guest, if there is a QEMU running for
this domain. This patch check which kind of guest is running before
before doing any call.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
ARM does not implemented PoD and so returns ENOSYS from XENMEM_set_pod_target.
The correct solution here would be to check for ENOSYS in libxl, unfortunately
xc_domain_set_pod_target suffers from the same broken error reporting as the
rest of libxc and throws away the errno.
So for now conditionally define xc_domain_set_pod_target to return success
(which is what PoD does if nothing needs doing). xc_domain_get_pod_target sets
errno==-1 and returns -1, which matches the broken error reporting of the
existing function. It appears to have no in tree callers in any case.
The conditional should be removed once libxc has been fixed.
This makes ballooning (xl mem-set) work for ARM domains.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Cc: george.dunlap@citrix.com
The original code is wrong because:
* claim mode wants to know the total number of pages needed while
original code provides the additional number of pages needed.
* if pod is enabled memory will already be allocated by the time we try
to claim memory.
So the fix would be:
* move claim mode before actual memory allocation.
* pass the right number of pages to hypervisor.
The "right number of pages" should be number of pages of target memory
minus VGA_HOLE_SIZE, regardless of whether PoD is enabled.
This fixes bug #32.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Both of these "goto finish;" statements are actually errors, and need to "goto
out;" instead, which will correctly destroy the domain and return an error,
rather than trying to finish the migration (and in at least one scenario,
return success).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: George Dunlap <george.dunlap@eu.citrix.com>
libxl_event.c:eventloop_iteration would pass the allocated pollfds
array size, rather than the used size, to poll (and to
afterpoll_internal).
The effect is that if the number of fds to poll on reduces, libxl will
poll on stale entries. Because of the way the return value from poll
is processed these stale entries are often harmless because any events
coming back from poll ignored by libxl. However, it could cause
malfunctions:
It could result in unwanted SIGTTIN/SIGTTOU/SIGPIPE, for example, if
the fd has been reused to refer to an object which can generate those
signals. Alternatively, it could result in libxl spinning if the
stale entry refers to an fd which happens now to be ready for the
previously-requested operation.
I have tested this with a localhost migration and inspected the strace
output.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Make rdname function work with xl.
The rdname function not support json output of xl commands and this cause
problems using xl, for example the check if domUs are already running (because
they have been restored) on domUs autostart does not succeed and the domain is
created in any case, causing xl create to fail.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
"ret", being set to -1 early on, gets cleared by the first invocation
of lz4_decompress()/lz4_decompress_unknownoutputsize(), and hence
subsequent failures wouldn't be noticed by the caller without setting
it back to -1 right after those calls.
Linux commit: 2a1d689c9ba42a6066540fb221b6ecbd6298b728
Reported-by: Matthew Daley <mattjd@gmail.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As Ian Campbell writes in http://bugs.xenproject.org/xen/bug/30:
There are two mechanisms by which a suspend can be aborted and the
original domain resumed.
The older method is that the toolstack resets a bunch of state (see
tools/python/xen/xend/XendDomainInfo.py resumeDomain) and then
restarts the domain. The domain will see HYPERVISOR_suspend return 0
and will continue without any realisation that it is actually
running in the original domain and not in a new one. This method is
supposed to be implemented by libxl_domain_resume(suspend_cancel=0)
but it is not.
The other method is newer and in this case the toolstack arranges
that HYPERVISOR_suspend returns SUSPEND_CANCEL and restarts it. The
domain will observe this and realise that it has been restarted in
the same domain and will behave accordingly. This method is
implemented, correctly AFAIK, by
libxl_domain_resume(suspend_cancel=1).
Attempting to use the old method without doing all of the work simply
causes the guest to crash. Implementing the work required for old
method, or for checking that domains actually support the new method,
is not feasible at this stage of the 4.4 release.
So, always use the new method, without regard to the declarations of
support by the guest. This is a strict improvement: guests which do
in fact support the new method will work, whereas ones which don't are
no worse off.
There are two call sites of libxl_domain_resume that need fixing, both
in the migration error path.
With this change I observe a correct and successful resumption of a
Debian wheezy guest with a Linux 3.4.70 kernel after a migration
attempt which I arranged to fail by nobbling the block hotplug script.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: konrad.wilk@oracle.com
CC: David Vrabel <david.vrabel@citrix.com>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
This replicates a Xend behavior, see ec78952374 ("xend: Dis-allow
device assignment if PoD is enabled.").
This change is restricted to HVM guest, as only HVM is relevant in the
counterpart in Xend. We're late in release cycle so the change should
only do what's necessary. Probably we can revisit it if we need to do
the same thing for PV guest in the future.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
The various cpuid functions are not available on ARM, so this
makes them raise an OCaml exception. Omitting the functions
completely results in a link failure in oxenstored due to the
missing symbols, so this is preferable to the much bigger patch
that would result from adding conditional compilation into the
OCaml interfaces.
With this patch, oxenstored can successfully start a domain on
Xen/ARM.
Signed-off-by: Anil Madhavapeddy <anil@recoil.org>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Without this gdb does not report an error.
With this patch and using a 1G hvm domU:
(gdb) x/1xh 0x6ae9168b
0x6ae9168b: Cannot access memory at address 0x6ae9168b
Drop output of iop->remain because it most likely will be zero.
This leads to a strange message:
ERROR: failed to read 0 bytes. errno:14 rc:-1
Add address to write error because it may be the only message
displayed.
Note: currently XEN_DOMCTL_gdbsx_guestmemio does not change 'iop' on
error and so iop->remain will be zero.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Mukesh Rathor <mukesh.rathor@oracle.com>
I had coded this with XGERR, but gdb will try to read memory without
a direct request from the user. So the error message can be confusing.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Mukesh Rathor <mukesh.rathor@oracle.com>
This reverts commit a0035ecc0d.
Even with this fix there is a period between the flush and the unmap where
processor may speculate data into the cache. The solution is to map this
region uncached or to use the HCR.DC bit to mark all guest accesses cached.
89eb02c220 "xen: arm: force guest memory accesses to cacheable when MMU is
disabled" has arranged to do the latter.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
This allows the application to pass a token to libxl in the fd/timeout
registration callbacks, which it receives back in modification or
deregistration callbacks.
It turns out that this is essential for timeout handling, in order to
identify which timeout to change on a modify event.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This will change initiate_domain_create to walk through NIC definitions
and automatically assign devids to those which have not assigned one.
The devids are needed later in domcreate_launch_dm (for HVM domains
using emulated NICs). The command string for starting the device-model
has those ids as part of its arguments.
Assignment of devids in the hotplug case is handled by libxl_device_nic_add
but that would be called too late in the startup case.
I also moved the call to libxl__device_nic_setdefault here as this seems
to be the only path leading there and avoids doing the loop a third time.
The two loops are trying to handle a case where the caller sets some devids
(not sure that should be valid) but leaves some unset.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The errors have been incorrectly identifying their function since c/s
861aef6e15 which did a lot of error handling
cleanup.
Use __func__ to ensure the name remains correct in the future.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
The original code works fine on 64-bit, but on 32-bit, the OCaml int (which is
1 bit smaller than the C int) is likely to overflow.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Jan Beulich
Ian Campbell
Andrew Cooper
Don Slutz
Ian Jackson
Marek Marczykowski-Górecki
Anthony PERARD
Wei Liu
Olaf Hering
Fabio Fantoni
Anil Madhavapeddy
Rob Hoes
Stefan Bader