Split coverage informations extracted from xencov utility.
This script accept coverage blob either as file or from input and extract
into files compatible with gcc format (gcda).
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The program xen-tmem-list-parse parses the output of xm/xl tmem-list
into human-readable format. A missing NULL terminator sometimes
causes garbage to be spewed where the two-letter pool type
should be output.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This patch provides vMCE save/restore when migration.
1. MCG_CAP is well-defined. However, considering future cap extension,
we keep save/restore logic that Jan implement at c/s 24887;
2. MCi_CTL2 initialized by guestos when booting, so need save/restore
otherwise guest would surprise;
3. Other MSRs do not need save/restore since they are either error-
related and pointless to save/restore, or, unified among all vMCE
platform;
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
- fix handling of partial data in XEN_DOMCTL_set_ext_vcpucontext
- fix adjustment of xen_domctl_ext_vcpucontext
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Committed-by: Jan Beulich <jbeulich@suse.com>
Specifically, what values are or aren't accepted as CPU identifier, and
how the values get interpreted should be consistent across sub-commands
(intended behavior now: non-negative values are okay, and along with
omitting the argument, specifying "all" will also be accepted).
For error handling, error messages should get consistently issued to
stderr, and the tool should now (hopefully) produce an exit code of
zero only in the (partial) success case (there may still be a small
number of questionable cases).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
If CPU stays in the same idle state for the full duration of
xenpm sample then average residency may not be reported correctly
since usage counter will not be incremented.
In addition, in order to calculate averages correctly residence
time and usage counter should be read and written atomically.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
Committed-by: Keir Fraser <keir@xen.org>
Idle state residence times as provided by pmstat_get_cx_stat() are not
reported precisely since remote core may be in idle state and
therefore has not updated its statistics at the time local core
collected them. This causes C0 residencies as calculated by xenpm to
sometimes become negative.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
Committed-by: Keir Fraser <keir@xen.org>
pygrub and xenpvnetboot are meant to be run by tools, and not by the user,
and thus should be in /usr/lib/xen/bin rather than /usr/bin.
Because most config files will still have an absolute path pointing to
/usr/bin/pygrub, make a symbolic link that we will deprecate.
Signed-off-by: George Dunlap <george.dunlap@eu.ctirix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The xenstore header xs.h is producing conflicts with other software[1].
xs is a too short identifier and does not matche the library. Renaming
the headers to xenstore.h and xenstore_lib.h is the easiest way to make
them easy recognizable and prevent furthe problems.
[1]: http://bugs.debian.org/668550
[ Also update QEMU_TAG, to bring in corresponding change to
qemu-xen-traditional. -iwj ]
Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
--HG--
rename : tools/xenstore/xs.h => tools/xenstore/xenstore.h
rename : tools/xenstore/xs_lib.h => tools/xenstore/xenstore_lib.h
Check for a curses compatible library (curses or ncurses basically).
One of those is needed to compile Xen tools (gtraceview and xentop).
Modify Makefiles/sources to use configure output (fetch CURSES_LIBS
from tools/Tools.mk and header to include from tools/config.h)
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
`xenpvnetboot' supports getting boot images from following locations:
- http://host/path
- https://host/path
- ftp://host/path
- file:///path
- tftp://host/path
- nfs:host:/path
- /path
- /path/file.iso
- /path/filesystem.img
- /dev/sda1
- nfs+iso:host:/path/file.iso
- nfs+iso:host:/path/filesystem.img
To use it, make `xenpvnetboot' as bootloader for PV guest::
bootloader = '/usr/bin/xenpvnetboot'
To get boot images from various locations, set the right bootloader
arguments, e.g.:
bootloarder_args = ['--location=http://192.168.0.1/fedora/x86_64']
bootloarder_args = ['--location=ftp://192.168.0.1/fedora/x86_64']
bootloarder_args = ['--location=file:///fedora/x86_64']
bootloarder_args = ['--location=tftp://192.168.0.1/fedora/x86_64']
bootloarder_args = ['--location=/fedora/x86_64']
bootloarder_args = ['--location=/fedora/Fedora-16-x86_64-DVD.iso']
bootloarder_args = ['--location=nfs:192.168.0.1:/fedora/x86_64']
bootloarder_args = ['--location=nfs+iso:192.168.0.1:/fedora/Fedora-16-x86_64-DVD.iso']
You can use `kernel' and `ramdisk' to specify the relative path of
boot kernel and ramdisk. `xenpvnetboot' will join them with the
location to find the boot kernel and ramdisk, e.g.:
kernel = 'images/pxeboot/vmlinuz'
ramdisk = 'images/pxeboot/initrd.img'
bootloarder_args = ['--location=http://192.168.0.1/fedora/x86_64']
kernel = 'fedora/x86_64/images/pxeboot/vmlinuz'
ramdisk = 'fedora/x86_64/images/pxeboot/initrd.img'
bootloarder_args = ['--location=http://192.168.0.1/']
You can also omit the `--location' option and specify the full URL for
`kernel' and `ramdisk' directly, e.g.:
kernel = 'http://192.168.0.1/fedora/x86_64/images/pxeboot/vmlinuz'
ramdisk = 'http://192.168.0.1/fedora/x86_64/images/pxeboot/initrd.img'
If only `--location' is specified and `kernel' and `ramdisk' are not
specified, `xenpvnetboot' will search the following places for boot
images from the location::
('images/xen/vmlinuz', 'images/xen/initrd.img'), # Fedora <= 10 and OL = 5
('boot/i386/vmlinuz-xen', 'boot/i386/initrd-xen'), # openSUSE >= 10.2 and SLES >= 10
('boot/x86_64/vmlinuz-xen', 'boot/x86_64/initrd-xen'), # openSUSE >= 10.2 and SLES >= 10
('current/images/netboot/xen/vmlinuz', 'current/images/netboot/xen/initrd.gz'), # Debian
('images/pxeboot/vmlinuz', 'images/pxeboot/initrd.img'), # Fedora >=10 and OL >= 6
('isolinux/vmlinuz', 'isolinux/initrd.img'), # Fedora >= 10 and OL >= 6
`xenpvnetboot' requires python module `urlgrabber'
http://urlgrabber.baseurl.org/.
Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This allows migration to a host with less MCA banks than the source
host had, while without this patch accesses to the excess banks' MSRs
caused #GP-s in the guest after migration (and it depended on the guest
kernel whether this would be fatal).
A fundamental question is whether we should also save/restore MCG_CTL
and MCi_CTL, as the HVM save record would better be defined to the
complete state that needs saving from the beginning (I'm unsure whether
the save/restore logic allows for future extension of an existing
record).
Of course, this change is expected to make migration from new to older
Xen impossible (again I'm unsure what the save/restore logic does with
records it doesn't even know about).
The (trivial) tools side change may seem unrelated, but the code should
have been that way from the beginning to allow the hypervisor to look
at currently unused ext_vcpucontext fields without risking to read
garbage when those fields get a meaning assigned in the future. This
isn't being enforced here - should it be? (Obviously, for backwards
compatibility, the hypervisor must assume these fields to be clear only
when the extended context's size exceeds the old original one.)
A future addition to this change might be to allow configuration of the
number of banks and other MCA capabilities for a guest before it starts
(i.e. to not inherits the values seen on the first host it runs on).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
- use consistent error values (stop mixing of [positive] errno values
with literal -E... ones)
- properly format output
- don't use leading zeros in decimal output
- move printing of average frequency into P-state conditional (rather
than a C-state one)
- don't print some C-state related info when CPU idle management is
disabled in the hypervisor
- use calloc() for array allocations that also got cleared via memset()
so far
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Pushing stuff onto the stack on x86-64 when we do not specify
-mno-red-zone is unsafe. Since the complicated asm is due to register
pressure on i386, we simply implement an all-new simpler alternative
for x86-64.
Signed-off-by: Keir Fraser <keir@xen.org>
Acked-by: Jan Beulich <jbeulich@novell.com>
Create two new variables called APPEND_ and PREPEND_ to add compile
flags at the beginning or at the end of the search path.
Added a new semantic for user defined compile flags, here is the list
of possible options:
PREPEND_LIB: add libraries to the search path before xen
(before xen installation folders).
PREPEND_INCLUDES: add headers to the search path before xen
(before xen installation folders).
APPEND_LIB: add libraries to the search path at the end
(after all xen installation folders have been added).
APPEND_INCLUDES: add libraries to the search path at the end
(after all xen installation folders have been added).
EXTRA_INCLUDES and EXTRA_LIB can still be used, and they will have the
same effect as PREPEND_INCLUDES and PREPEND_LIB.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Sandy bridge introduces new MSR to get cc7/pc2 residency (core C-state
7/package C-state 2). Print the cc7/pc2 residency when on sandy bridge
platform.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Committed-by: Keir Fraser <keir@xen.org>
c/s 17b754cab7b0 introduced a per-VCPU viridian structure to
store the APIC assist pfn. This patch adds support for save and
restore of that value.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Adds tool support to debug backends which expose I/O ring state in
sysfs. Currently supports /sys/devices/xen-backend/vbd-*-*/io_ring
nodes for block I/O, where implemented.
Primary function is to observe ring state make progress over a period
of time, then report stuck message queue halves where pending
consumer/event are not moving.
Adding --kick will re-issue event notifications to frontends, and/or
kick backends out of wait state.
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Adds "make deb", which does a "make dist" build and wraps the
resulting dist/install files in dist/xen-<version>.deb
This is _not_ a "packaged" version of Xen for Debian users, nor is it
intended to compete with anyone else's packaging efforts. In
particular it doesn't do any of the boot-time or fstab fixups needed
to actually start the xen tools. It's just a quick hack for
developers to be able to quickly install and uninstall a Xen build on
a test box.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
Several places include it in CFLAGS even though it is never defined. A
few others use it as nothing more than a gathering point for
CFLAGS. Get rid of it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
A fair few things under tools link against libraries which they don't
even use.
Most of this appears to come from copy-and-pasting previous Makefile
snippets and cargo-culting plus the tendency to define global $(LIBS)
even for Makefiles which build multiple separate utilities or
libraries.
Identified by comparing a build with --as-needed to one without by
looking at the NEEDED header of all ELF objects.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
Fixed problems include:
* previously just print out a error instead of help info
while running without cmdline parameters.
* -u & -n lead to Segmentation fault.
* -c and then use default ranges, the default ranges is not
50us... but 50000/tsc2us....
Signed-off-by: Wei Gang <gang.wei@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
EBUSY is a legitimate soft failure, due to inability to acquire a
lock, or because RCU work has not been done since a CPU was last
offlined.
Signed-off-by: Keir Fraser <keir@xen.org>
This makes the interface consistent with the changes made to the main
interface in 21483:779c0ef9682c.
Also fix some references to "struct xc_interface" which should have
been simply "xc_interface" in tools/xenpaging, and update QEMU_TAG to
pull in the corresponding qemu change.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Current function has heavily overloaded semantics for the various
arguments. Separate out into more specific functions.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Current function has heavily overloaded semantics for the various
arguments. Separate out into more specific functions.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Linker command lines are order-sensitive.
Move linker options -Lfoo -lfoo from LDFLAGS to LDLIBS and place this new
variable after the objects to link. This resolves build errors in xenpagin
and blktap with recent toolchains.
rename SHLIB_CFLAGS to SHLIB_LDFLAGS
rename LDFLAGS_* to LDLIBS_*
move LDFLAGS usage after CFLAGS in CC calls
remove stale comments in xenpaging Makefile
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This tool reads the CPU save records, overwrites RIP with a bogus
value, and then restores them. This is, of course, not guaranteed
to crash the guest (since the CPUs may not be executing in kernel
at the time) but it's good for breaking into some tight loops that
would be hard to debug otherwise.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
According to Intel 64 and IA32 Architectures SDM 3B Appendix B, Intel
Nehalem/Westmere processors provide h/w MSR to report the core/package
cstate residencies.Extend sysctl_get_pmstat interface to pass the
core/package cstate residencies, and modify xenpm to output those
information.
[tools part of the patch]
Signed-off-by: Wei Gang <gang.wei@intel.com>
Frediano Ziglio
Dan Magenheimer
Liu, Jinsong
Jan Beulich
Boris Ostrovsky
George Dunlap
Ian Campbell
Tim Deegan
Roger Pau Monne
Zhigang Wang
Keir Fraser
Andres Lagar-Cavilla
Yang Zhang
Paul Durrant
Kevin Tian
Daniel Stodden
Tim Deegan
Wei Gang
Stefano Stabellini
Ian Jackson