The headers libelf.h and elfstructs.h were removed from
xen/include/public in 19011:7df072566b8c. But this broke the stubdom
build because parts of libxc depend on them. This patch adds
$(XEN_ROOT)/xen/include/xen to the stubdom -I path.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
19818 added the following line to stubdom-dm:
. ./stubdompath.sh
and replaced many paths with variables. However the path to
stubdompath.sh is obviously wrong and stubdompath.sh is nowhere to be
found anyway. For the moment I am dropping . ./stubdompath.sh and
hardcoding the values of the variables.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch fixes a race during live migration with stubdoms: right
after the stubdom dies the configuration file of the VM is removed by
stubdom-dm but, in case of a live migration, the configuration file
could be the one of the new VM in the process of being created.
Removing the config file before destroying the stubdom is enough to
solve the race.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Attached patch installs ioemu-stubdom into XENFIRMWAREDIR
analogous to what we do with hvmloader.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
- Have the buid system generate a file which exports the install paths
for the hotplug scripts and stubdom / stubdom-dm
- Move file generation code from tools/python/Makefile into a gmake
macro
in Config.mk to avoid maintenance of three duplicates each with its
own
tweaks and bugs
- Export gmake variables into ioemu as shell variables
for upcoming ioemu patches
- Do above as a gmake macro to avoid maintenance of several duplicates
- Adjust hotplug scripts to find the right xen binaries from the
install directory
- Adjust stubdom-dm to use the install directories
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Add support for the qemu monitor in a stubdom, the same way the
emulated serial support was added few days ago. The stubdom exports
the monitor as a pty and minios opens a console frontend; qemu in dom0
provides the correspondent backend for this additional pv console that
happens to be the qemu monitor.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Allow 'file' based disks, that are blkback based disks, to be shared
between the guest domain and the stubdom. It does so exploiting the
same exception introduced in the previous patch "stubdoms phy disks
sharing". Now we can remove the hack in stubdom-dm that forces "file"
disks to be opened using blktap instead of blkback.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
if they are to be linked with object files created by ocamlc and the minios
kernel.
This is needed to build stubdoms written in ocaml.
Signed-off-by: Alex Zeffertt <alex.zeffertt@eu.citrix.com>
Network support is still provided the same way: using the tap
interface, created in qemu using netfront.
The lwip stack is still available to avoid additional compilation
issues.
However the stubdom is not going to have its own vif anymore,
this means that the only vnc server supported is the one in dom0.
You can still enable the vnc server in a stubdom at compile time, if
you want so.
Probably the most important change caused by this patch to xen users
is that you don't have to specify two vif in the stubdom config file
anymore, but just one:
-vif = [ '', 'ip=10.0.1.1,mac=aa:00:00:12:23:34']
+vif = ['ip=10.0.1.1,mac=aa:00:00:12:23:34']
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch removes the need for a second configuration file for
stubdoms: it is going to be automatically generated by the script
stubdom-dm using command line options and xenstore to find any needed
information.
The configuration script will be placed under /etc/xen/stubdoms and
automatically removed when the domain is destroyed.
The only change needed in xend is not to write on xenstore sdl,
opengl and serial command line options for qemu, because stubdoms do
not support them.
It is safe to remove those two options from xenstore because qemu does
not use xenstore to read commans line options.
Finally this patch fixes blkfront disconnections from backends and
display and xauthority variables for pv guests.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Add __stack_chk_fail to mini-os and __sprintf_chk __fprintf_chk to
newlib, to cope with ocaml runtimes compiled with -fstack-protector.
From: "George S. Coker, II" <gscoker@alpha.ncsc.mil>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
xen-setup runs the upstream configure script, and ends up
autodetecting various properties of the host and then trying to use
them in stubdom, which works badly.
In commit c609854fe18aab3216f28e1e5291b75970d398d5 in
qemu-xen-unstable we provide a new `xen-setup-stubdom' script, which
hardcodes the relevant answers.
With these two changes, stubdom should compile again.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
We need to disable libvde in the stubdom qemu-xen configuration.
Thanks to Jun Koi for the report and testing.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch adds a videoram parameter (4MB is the default) to pv guests
too: if the pv guest is actually a stubdomain then the videoram size
is added to the initial required available memory.
This way there is no risk that a stubdom fails to populate the
videoram because the RAM freed for the videoram by dom0 has already
been used to create the stubdom.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Changeset 19011:7df072566b8c moved some of the libelf headers.
However, no changes were made to stubdom/Makefile.
stubdom/Makefile unfortunately contains embedded in it knowledge about
the header directory structures, and must therefore typically be
updated if new header directories are created.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
I have copied the tarballs that the xen-unstable build downloads to
xenbits.xensource.com (which also hosts our hg and git). This patch
changes the download URLs to use that location.
That way the build will depend on only one external machine, under one
administration, rather than many. Also it means that the build won't
break if these sites become permanently unavailable or are rearranged
and we don't run a risk of having to panic and beg if a file should go
missing.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Replace the stubdom/ioemu link farm creation in stubdom/Makefile,
with code which arranges that:
* No symlinks are made for output files - in particular, any
symlinks for .d files would be written through by the compiler
and cause damage to the original tree and other strange
behaviours
* All subdirectories are made as local subdirectories rather than
links
* Any interrupted or half-completed creation of the link farm
leaves the directory in a state where the link farming will be
restarted
* We use make's inherent ability to test for the existence of files
rather than using [ -f ... ] at the start of the rule's commands
* The list of files to be excluded from the link farm can be
easily updated
etc.
This should fix some problems particularly with parallel builds,
or by-hand builds where directories are entered in other than the
usual order.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
* Move code for generating an absolute version of XEN_ROOT
into a common make variable set in Config.mk
* Use this common code when invoking make -C ioemu-dir clean
from tools/, which avoids a problem where `make clean' fails
because qemu's (ioemu-remote's) build system wants to run
`make clean' in `tests' but XEN_ROOT is a confection involving
../'s.
* Use this common code in stubdom/Makefile, instead of $(abspath...)
as the latter is a relatively new feature in GNU make and is not
available in all the places that we want to be able to build
(cf c/s 17997:3f23e01d31985899dbd1660b166f229f1ee74292)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
We can decide to make off_t 64bit instead of implementing the LFS
tricks. Name corresponding functions foo64 to permit simple caml
programs linking.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
While building stubdom, I saw an error.
install: cannot stat `lib/{config,header,pci,types}.h': No such file
or directory
It seems brace expansion is not available in some environments, so we
had better avoid using it.
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
Keir Fraser