In order to have two different DSDT tables for rombios and SeaBIOS,
this patch introduce a new parameter to acpi_build_tables() which
contain the DSDT table to load.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
The ACPI PIIX4 device in QEMU upstream as not the same behavior to
handle PCI hotplug. This patch introduce the necessary change to the
DSDT ACPI table to behave as expceted by the new QEMU.
To switch to this new DSDT table version, there is a new option
--dm-version to mk_dsdt.
Change are inspired by SeaBIOS DSDT source code.
There is few things missing with the new QEMU:
- QEMU provide the plugged/unplugged status only per slot (and not
per func like qemu-xen-traditionnal.
- I did not include the _STA ACPI method that give the status of a
device (present, functionning properly) because qemu-xen does not
handle it.
- I did not include the _RMV method that say if the device can be
removed,
because the IO port of QEMU that give this status always return
true. In
SeaBIOS table, they have a specific _RMV method for VGA, ISA that
return
false. But I'm not sure that we can do the same in Xen.
So, the only way to remove a device is from outside of the guest (like
with xl pci-detatch), and can not be initiated from inside.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Use __attribute__((format(printf,..))) for the function _stmt to
prevent any mistake.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This patch move the IO port range reservation from the dsdt.asl to
mk_dsdt. This IO port range need to be generated by mk_dsdt, because
qemu-xen use different port. The IO port for qemu-xen will be added in
a later patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
With this new option, there is no need to compile mk_dsdt for each
DSDT table that we want. The Makefile is a bit reorganize to handle
this new option and to prepare more change in a coming patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
These have broken the build and it seems to be difficult to fix. So
we will revert the whole lot for now, and await corrected patch(es).
Revert "fix the build when CONFIG_QEMU is specified by the user"
Revert "tools: fix permissions of git-checkout.sh"
Revert "scripts/git-checkout.sh: Is not bash specific. Invoke with /bin/sh."
Revert "Clone and build Seabios by default"
Revert "Clone and build upstream Qemu by default"
Revert "Rename ioemu-dir as qemu-xen-traditional-dir"
Revert "Move the ioemu-dir-find shell script to an external file"
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
In particular the madt_lapic0_addr and madt_csum_addr fields are
filled in while building the tables.
This fixes a bluescreen on shutdown with certain versions of Windows.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reported-by: Christoph Egger <Christoph.Egger@amd.com>
Tested-and-acked-by: Christoph Egger <Christoph.Egger@amd.com>
liberal terms.
This code is a great example of a simple xenbus implementation and we
would like to reuse it in projects with non-GPLv2 license
(specifically in this case SeaBIOS which is GPLv3).
I picked the license from extras/mini-os/COPYING (A two clause BSD
style license) since mini-os exists for much the same purpose.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Keir Fraser <keir@xen.org>
When booting a Windows guest, the OS report an issue with the ACPI (in
a BSOD). The exact issue is "SCI_EN never becomes set in PM1 Control
Register." (quoted from WinDbg help).
So this patch enables the flags SCI_EN if it is not yet enabled.
Reported-by: Tobias Geiger <tobias.geiger@vido.info>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Keir Fraser <keir@xen.org>
These can be used by BIOS-specific handlers to set up memory regions
as required by their firmware payload.
Use mem_hole_alloc() to allocate properly reserved space for the
shared-info-page mapping. The old location conflicts with space
required for the OVMF BIOS (support for which is work in progress).
Signed-off-by: Keir Fraser <keir@xen.org>
This is clearer and less fragile than trying to make relative calls
work. In particular, the old approach failed if _start was not
== HVMLOADER_PHYSICAL_ADDRESS. This was the case for some modern
toolchains which reorder functions.
Signed-off-by: Keir Fraser <keir@xen.org>
SeaBIOS will reserve memory in the e820 as necessary, including BIOS
data structures such as the EBDA, any tables it creates or copies into
pleace etc. Therefore arrange that the memory map provided by
hvmloader to SeaBIOS reserves only things which HVMloader has created.
Since ROMBIOS is more tightly coupled with hvmloader we retain the
ability to reserve BIOS regions in the hvmloader produced e820 and use
that from the ROMBIOS backend.
The code for this could probably have been simpler but the existing
code avoids overlapping e820 areas and so the new code does the same
(many guest OSes sanitize the e820 map to handle this, but I wouldn't
trust that all do, so I didn't take the risk)
For ROMBIOS the resulting e820 map as seen by the guest is the same
except the reserved regions at 0x9e000-0x9fc00,0x9fc00-0xa0000 are
merged into a single region 0x9e000-0xa0000 (Linux guests sanitize the
e820 to look like this anyway).
For SeaBIOS the result is that the lowmem reserved region is from
0x9f000-0xa0000 rather than 0x9e000-0xa0000 which correctly reflects
SeaBIOS's actual usage.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
I mistakenly thought that the "struct bios_info" was a ROMBIOS
specific data structure and so caused it to be populated only in the
ROMBIOS case.
However it turns out that the majority of the struct's fields are
actually referenced from the ACPI DSDT and hence are needed for
SeaBIOS too.
While in principal it might have been possible to continue to mix
ROMBIOS and ACPI bits in this datastructure this is, evidently,
confusing but also leads to header file dependencies from
ROMBIOS->hvmloader which I had been hoping to avoid so as to head-off
future accidental re-entanglement of ROMBIOS and hvmloader.
So instead I have split the ACPI parts into a new "struct acpi_info"
which is defined entirely within the acpi building code in hvmloader
and which comes with a big comment pointing to the DSDT interaction.
This new ACPI info is placed at 0x9F000 which is available under both
ROMBIOS and SeaBIOS. This address is in a reserved region of the E820
and is just above the ROMBIOS stack.
The resulting "struct rombios_info" is hardly worthy of its own
structure but keep it anyway.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Rather than building the tables twice, once purely to figure out the
size, just allocate each individual table as we go.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
1024 bytes create a lot of wastage when the majority of allocations
are of BIOS table data structures which are generally happy with much
lower alignment. I conservatively chose 16 bytes.
Most callers pass 0 for the alignment anyway, for the rombios high
code allocation I kept it 1024 byte aligned since it was the only case
that didn't seem obviously ok with a smaller alignment.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Build the various BIOS tables and arrange for them to be passed to
SeaBIOS. We define a simple data structure structure at a known
physical address for this purpose.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Currently we have ->bios_high_setup, which is called relatively early
and returns a cookie which is passed to ->bios_info_setup which runs
towards the end and creates the BIOS info, incorporating the cookie
which (in the case of ROMBIOS) happens to be the BIOS's high load
address . This is rather ROMBIOS specific.
Refactor to have ->bios_info_setup which is called early and prepares
the bios_info, ->bios_relocate which does any necessary relocation
(updating the BIOS info as necessary) and ->bios_info_finish which
finalises the info (e.g. by calculating the checksum).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Returns memory which is passed to the subsequent BIOS but can be
reused once the contents is consumed. An example of this would be a
BIOS table which the BIOS consumes by copying rather than simply
referencing.
Users which need a temporary scratch buffer for internal use
scratch_start which follows these allocations.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
There is an implicit assumption in the PCI spec that the primary VGA
device (e.g. something with class==VGA) will have I/O enabled in order
to make the standard VGA I/O registers (e.g. at 0x3xx) available, even
though the device has no explicit I/O BARS.
The qemu device model for the Cirrus VGA card does not actually
enforce this but SeaBIOS looks for a VGA device with I/O enabled
before running the VGA ROM. Coreboot has similar behaviour and I
verified on a physical Cirrus GD 5446 that the BIOS had enable I/O
cycles.
The thread at
http://www.seabios.org/pipermail/seabios/2011-May/001804.html
contains more info.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
SeaBIOS has functionality to load ROMs from the PCI device directly,
it makes sense to use this when it is available.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Windows SVVP tests require an HPET table even if the HPET is disabled.
This makes sense since the HPET _is_ in the DSDT and, while the OS
does not know that, in principle it's status may change.
(For what it's worth SeaBIOS, in addition to doing this, totally
ignores QEMU's -no-hpet flag and always reports 0x0f for the HPET's
_STA method).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Keir Fraser <keir@xen.org>
The SeaBIOS integration here is only semi-complete and is targetted at
developers and very early adopters who can be expected to cope with
some rough edges. In particular the user must clone, patch as
necessary and compile SeaBIOS themselves since this patchset does not
cover any of that (in the same way we currently do not integrate
upstream qemu clone+build). Include a big comment to that effect next
to the Config.mk option.
Many of the bios_config callback functions are not yet used by
SeaBIOS.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Executing UD2 (invalid opcode) triggers a triple fault which signals
reboot to the toolstack, rather than crash.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Keir Fraser <keir@xen.org>
Also, generate roms.inc file in a scratch location and then move in
place. This is more reliable if make is terminated at an arbitrary
point.
Signed-off-by: Keir Fraser <keir@xen.org>
Allow the toolstack to select the BIOS to use via a xenstore key.
Defaults to "rombios" for compatibility with toolstacks which do not
write the key (e.g. xend).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Keir Fraser <keir@xen.org>
Anthony PERARD
Andrew Cooper
Ian Jackson
Stefano Stabellini
Ian Campbell
Keir Fraser
Paolo Bonzini