Specificially we are pulling in the upstream patch (commit
1b56452121672e6408c38ac8926bdd6998a39004)):
[ath9k] Remove confusing logic inversion in an ANI variable
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Only 4KB allocation was using new_memflags. We should use new_memflags
in for 2MB and 1GB allocation as well because that variable contains
node information.
Without this patch, when creating a HVM guest with vNUMA, because the
node information was not present in the flags passed to libxc, actual
memory allocation didn't comply with what user specified. With this
patch the behaviour is correct.
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
... but allow user to override that check by specifying maxvcpus= in xl
configuration file.
Note that the code is constructed such that the fallout is dealt with
after parsing. We can live with that because though it wastes a bit of
cpu cycles but it is still functionally correct and I would like to have
a clear split between parsing and dealing with fallouts.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
We should parse the output from splitting function, not the original
string, otherwise the parsed result is wrong.
For example:
vnuma = [ [...,"vdistance=10,20",...],
[...,"vdistance=20,10",...] ]
Before this change, vdistance from node 0 to all nodes (including
itself) was 10 and vdistance from node 1 to all nodes was 20.
After this change, vdistance from node 0 to itself is 10, to node 1 is
20 and vdistance from node 1 to node 0 is 20, to itself is 10. That's
the correct vdistance settings we expect.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The test for 'nr_vmemranges < nr_vnodes' in xc_domain_setvnuma() was
originally writtten with the idea that number of memory ranges would
at least be equal to number of nodes.
We may want to specify nodes with no memory, however, and thus this
check should be removed.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The firmware directory is not built at all on ARM. Attempting to update
it using the target subtree-force-update will fail when try to update
seabios.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
C requires that every use of va_copy() is matched with a va_end() call.
This is especially important for x86_64 as va_{start,copy}() may need to
allocate memory to generate a va_list containing parameters which were
previously in registers.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Coverity warns for every occurrence of rand(), which is made worse
because each time the IDL changes, some of the calls get re-flagged.
Collect all calls to rand() in a single function, test_rand(), which
takes a modulo parameter for convenience. This turns 40 defects
currently into 1, which won't get re-flagged when the IDL changes.
In addition, fix the erroneous random choice for libxl_defbool_set().
"!!rand() % 1" is unconditionally 0, and even without the "% 1" would
still be very heavily skewed in one direction.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The chances of an allocation failing are slim but nonzero. Assert
success of each allocation to quieten Coverity, which re-notices defects
each time the IDL changes.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The grants are based on the Xen granularity (i.e 4KB). While the function
to map grants for Linux (linux_gnttab_grant_map) is using the correct
size (XC_PAGE_SIZE), the unmap one (linux_gnttab_munmap) is using
getpagesize().
On domain using a page granularity different than Xen (this is the case
for AARCH64 guest using 64KB page), the unmap will be called with the
wrong size.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
There were two problems with original code:
1. sd_booted() was used to determined if the process was started by
systemd, which was wrong.
2. Exit with error if pidfile was specified, which was too harsh.
These two combined made cxenstored unable to start by hand if it ran
on a system which had systemd.
Fix issues with following changes:
1. Use sd_listen_fds to determine if the process is started by systemd.
2. Don't exit if pidfile is specified.
Rename function and restructure code to make things clearer.
A side effect of this patch is that gcc 4.8 with -Wmaybe-uninitialized
in non-debug build spits out spurious warning about sock and ro_sock
might be uninitialized. Since CentOS 7 ships gcc 4.8, we need to work
around that by setting sock and ro_sock to NULL at the beginning of
main.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Update libxc to 4.6.
Update libxl to 4.6.
Update libxlu to 4.6.
I did
git-grep 'MAJOR.*='
and also to check I had everything
git-grep 'SONAME_LDFLAG' | egrep -v 'MAJOR' |less
The other, un-updated, libraries are:
blktap2 (control, libvhd) 1.0 in-tree users only, no ABI changes
libfsimage 1.0 no ABI changes
libvchan 1.0 no ABI changes
libxenstat 0.0 (!) no ABI changes
libxenstore 3.0 no ABI changes
My assertions "no ABI changes" are based on the output of
git-diff origin/stable-4.5..staging .
and similar runes, sometimes limited to .h files.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
v2: Bump libxlu too. [ Reported by Wei Liu. ]
We need to use libxl__domain_build_state.pv_cmdline in order to pickup
the correct args when using pygrub. libxl_domain_build_info.cmdline is
any args statically configured by the user.
This is consistent with the call to xc_domain_allocate, which takes
the cmdline too (in that case for x86/PV usage).
state->pv_cmdline is also set for non-pygrub guests, since
libxl__bootloader_run propagates info->cmdline if no bootloader is
configured.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Read and write "toolstack" information using the new
EMULATOR_XENSTORE_DATA record, and have the conversion script take care
of the old format.
The entire libxc and libxl migration v2 streams are now bitness-neutral
in their records.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
With the newly specified EMULATOR_XENSTORE_DATA record, there are two
libxl records with an emulator subheader. Refactor the existing code to
make future additions easier, and rename some functions for consistency
with the new scheme.
* Calculate the subheader at stream start time, rather than on the fly.
Its contents are not going to change.
* Introduce a new setup_emulator_write() to insert a sub header in the
appropriate place before a blob of data.
* Rename *toolstack_* to *emulator_xenstore_*
* Rename *emulator_* to *emulator_context_*
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
The new EMULATOR_XENSTORE_DATA content is a sequence of NUL terminated
key/value strings, with the key relative to the device model's xenstore
tree.
A sample might look like (as decoded by verify-stream-v2):
Emulator Xenstore Data (Qemu Upstream, idx 0)
'physmap/1f00000/start_addr' = 'f0000000'
'physmap/1f00000/size' = '800000'
'physmap/1f00000/name' = 'vga.vram'
This patch introduces libxl helpers to save and restore this new format,
which reimplement the existing libxl__toolstack_{save,restore}() logic.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The legacy "toolstack" record as implemented in libxl turns out not to
be 32/64bit safe. As migration v2 has not shipped yet, take this
opportunity to adjust the specification and fix the incompatibility.
Libxl shall loose all knowledge of the old "toolstack" blob and use this
EMULATOR_XENSTORE_DATA record instead. Compatibility shall be handled
by the legacy conversion script.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Previously, in the case of an error causing a call to
libxl__conversion_helper_abort() on a stream without legacy conversion,
libxl would fall over a NULL pointer because chs->ao was not set up.
Arrange for all ->ao's to be set up at _init() time, by having each
_init() function assert that their caller has done the right thing.
While doing so, introduce a previously-missing save_helper_init() in
stream_read_init().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
The default libxl timeout for hotplug scripts execution is too low, when
launching 40 HVM guests in parallel, all using the same file as disk,
execution times of ~20s are expected. Increase the timeout to 40s in order
to be sure hotplug scripts have enough time to execute.
This is a short term solution.
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When --with-system-qemu is used, it is possible that we cannot find
qemu-system-i386 in LIBEXEC_BIN, which can cause error in xencommons
init script and xen-qemu-dom0-disk-backend.service systemd service.
Signed-off-by: Ting-Wei Lan <lantw44@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxl__ao_inprogress_gc() is hidden behind various macros used to
construct local variables. Assert() that NULL is not passed, to make
such an error very obvious, rather than a plain segfault at 0.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Part of the callback contract with check_all_finished() is that each
running parallel task shall call it exactly once.
Previously, it was possible for stream_continue() or
write_toolstack_record() to fail and call into check_all_finished(). As
the save helpers callback has fired, it no longer counts as in use,
which causes check_all_finished() to fire the stream callback. Then,
unwinding the stack back and calling check_all_finished() a second time
results in the same conditions being observed, and the stream callback
being fired a second time.
To avoid this, check_all_finished() is called before any other actions
which continue the stream functionality, and the stream is only
continued if it has not been torn down. This guarantees not to continue
stream operations if the stream does not owe a callback to
check_all_finished().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Avoid stacking of check_all_finished() via synchronous teardown of
tasks. If the _abort() functions call back synchronously,
stream->completion_callback() ends up getting called twice, as first
and last check_all_finished() frames observe each task being finished.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Only ever set stream->rc in check_all_finished(). The first version of
the migration v2 series had separate rc and joined_rc parameters, where
this logic worked. However when combining the two, the teardown path
fails to trigger if stream_complete() records stream->rc itself. A side
effect of this is that stream_done() needs to take an rc parameter.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
I missed the fact that next_bdf is used to parsed user supplied
strings when reviewing. The user supplied string is a NULL-terminated
string separated by comma. User can supply several PCI devices in that
string. There is, however, no delimiter for different devices, hence
we can't change the syntax of that string.
This patch reinstate the original implementation of next_bdf to
preserve the original syntax. The last argument for xc_assign_device
is always 0.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Initialise polFd to -1 before hand to avoid closing 0 by accident.
Also fixed some style problems while I was there.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Always call init and dispose function on info_buf though it's not
always used.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Document how cpupool_info works. Distinguish success (ERROR_FAIL +
ENOENT) vs failure in libxl_list_cpupool and properly clean up the array
in failure path.
Also switch to libxl__realloc and call libxl_cpupool_{init,dispose}
where appropriate.
There is change of behaviour. Previously if memory allocation fails the
said function returns NULL. Now memory allocation failure is fatal. This
is in line with how we deal with memory allocation failure in other
places in libxl though.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
All of these are UNUSED_VALUE defects where a default value is
unconditionally overwritten. They are not particularly interesting,
bug wise, but keeping these defects at bay helps prevent real bugs
going unnoticed in the volume.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add further instructions to the libxc "Future Extensions" section, and
provide such a section for libxl.
In addition, drop the "In experimental __func__" IPRINTF()s from the
libxc implementations.
Finally, a correction to libxl's "Not Yet Included" section which
should have been amended in c/s 7eaec00 when libxl Remus support was
introduced into the protocol.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Update the libxc spec to indicate more sternly that TOOLSTACK records
should no longer be used.
Also, trim further toolstack infrastructure which should have gone in
c/s 39bf4e9 "tools/libxl: Drop all knowledge of toolstack callbacks"
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Konrad Rzeszutek Wilk
Wei Liu
Boris Ostrovsky
Roger Pau Monne
Ian Campbell
Julien Grall
Andrew Cooper
Ian Jackson
Ting-Wei Lan
Tiejun Chen