In particular when cross-compiling or having in place other tool chain
overrides, invoking make to build individual files (e.g. object,
preprocessed, or assembly ones) so far involves putting the various
overrides on the command line instead of simply getting them from
./.config.
Furthermore this helps working around a yet unaddressed make quirk [1]:
Variables put on the command line are invisible to $(shell ...), unless
invoked from a recursive make: During the recursive invocation such
variables are put in the recursive make's environment and hence become
"visible".
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[1] https://savannah.gnu.org/bugs/?10593
Today the build will fail if --disable-pv-grub as a parameter of
configure, as the main Makefile will unconditionally try to build a
32-bit pv-grub stubdom.
Fix that by introducing a pv-grub-if-enabled target in
stubdom/Makefile taking care of this situation.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
As a convenience so that oxenstored patches can be compile-tested
using upstream's build-system before submitting upstream.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
The top-level makefile make uses of internal implementation detail of
the xen build system. Avoid that by creating a new target
"install-tests" in xen/Makefile, and by fixing the top-level Makefile
to not call xen/Rules.mk anymore.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Commit fd35f32b4b ("tools/x86emul: Use struct cpuid_policy in the
userspace test harnesses") didn't account for the dependencies of
cpuid-autogen.h to potentially change between incremental builds. In
particular the harness has a "run" goal which is supposed to be usable
independently of the rest of the tools sub-tree building, and both the
harness and the fuzzer code are also supposed to be buildable
independently. Therefore a re-build of the generated header needs to be
triggered first, which is achieved by introducing a new top-level target
pattern (for just the "run" part for now).
Further cpuid.o did not have any dependencies added for it.
Finally, while at it, add a "run" target to the cpu-policy test harness.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In d290e32517
"build system: don't let install-stubdom depend on install-tools"
the dependency of install-stubdom on install-tools was removed.
However, this was not correct. stubdom/Makefile contains this:
$(XEN_ROOT)/tools/qemu-xen-traditional-dir:
$(MAKE) DESTDIR= -C $(XEN_ROOT)/tools qemu-xen-traditional-dir-find
As I have written before:
With recursive make, it is necessary for the overall structure of the
makefiles to sequence things so that each directory is entered exactly
once, before its dependent directories are entered. (It is possible
to violate this rule without creating races but it is tricky and
inadvisable.)
Since d290e32517, it can happen that the command for the
qemu-xen-traditional-dir-find rule is run twice simultaneously - once
as a result of $(MAKE) -C tools install, and once as a result of
$(MAKE) -C stubdom install. If you get unlucky, this causes lossage.
(This just happened to me in an osstest flight.)
In principle we could alternatively fix this by lifting the commands
in the qemu-xen-traditional-dir-find target (and perhaps other things
too) into the toplevel Makefile, as was done for mini-os.
But that seems overkill given how bad the stubdom build system is, and
the fact that we think at some point this qemu-trad will go away
entirely. Adding the tools dependency back to the stubdom build is
by and large good enough.
(Someone who really wants to build stubdom without tools is welcome to
do this separation if they really want to.)
CC: Juergen Gross <jgross@suse.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The tboot targets are woefully out of date. These should really be
retired because setting up tboot is more complex than the build process
for it.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Christopher Clark <christopher.clark6@baesystems.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In the toplevel Makefile, provide build-tests and install-tests
targets which descend into xen/test. (dist-tests is provided
automatically by the pattern rule, as is the convention here.)
We have to set BASEDIR ourselves, and use these curious runes, because
the convention in Makefiles under xen/ is to "make -f Rules.mk" with
BASEDIR set and to expect Rules.mk to reinvoke the per-directory
Makefile. (This is really very strange.) Normally this invocation
pattern is organised by the machinery in xen/Makefile (which sets
BASEDIR) and Rules.mk, but we need to invoke it from outside that
context.
In theory it would be nice to have a pattern rule %-tests. But this
is not the style in the rest of the toplevel Makefile; and doing that
might interfere with the dist-% pattern rule.
None of this is invoked by default. If install-tests or dist-tests is
requested, the livepatches (the only current output from xen/tests)
are shipped in DESTDIR/usr/lib/debug/xen-livepatch/.
This allows CI systems such as osstest which are trying to consume
this to arrange for the files to be built, and output, without them
having to have special knowledge of the details of Xen's build system.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Recent changes to this Makefile have broken some build targets, and
some parallel builds.
Looking at it, I think I have identified the undocumented design
intent in the top-level Makefile. So in this patch I document it, and
also make it true.
In detail:
* Add a comment with the new design intent
* Get rid of the ad-hoc rules for recursing into tools/include,
and replace them with a pattern rule
* Add an appropriate dependency on TARGET-tools-public-headers from
TARGET-tools and TARGET-stubdom (but not dist-*).
* Get rid of all the separate invocations of $(MAKE) -C tools/include
which are now obsolete
* Un-deprecate the simple `tools' etc. targets (aliases for `dist-tools')
which we seem not to be making any effort to get rid of
I have verified with the following shell script that after my change,
the tree producese the same results for various build targets as
3fafdc28eb (before the Makefile-hacking started).
My tests failed as expected for make -C tools, both before and after.
Separately, there is a bug in the Makefiles that `make distclean-tools'
fails. I have not investigated that bug in detail.
#!/bin/bash
set -e
set -o pipefail
listings=../listings
rm -rf $listings
mkdir $listings
chks () {
reskey="C$subdir $*"
reskey="${reskey// /_}"
reskey="${reskey//\//:}"
lk=$listings/$reskey
for suffix in '' -xen -tools -stubdom -docs; do
case "$subdir:$suffix" in
.:*) ;;
*:) ;;
*) continue;;
esac
git clean -qxdff
rm -rf $output
printf '%s' "running -C$subdir suffix=$suffix "
case "$subdir $suffix" in
*xen*) ;;
*) printf 'configure '; ./configure >$lk.cfg 2>&1 ;;
esac
fail=''
for targ in $*; do
realtarg=$targ$suffix
printf '%s ' "$realtarg"
if ! make -C $subdir -j10 $realtarg >${lk}_${realtarg}.log 2>&1
then
fail=$realtarg
break
fi
done
if [ "$fail" ]; then
echo fail!
echo "$fail failed" >$lk.list
else
echo ok.
(test ! -e "$output" || find $output) |sort >$lk.list
fi
done
}
subdirs='. xen docs tools'
output=$PWD/dist
for subdir in $subdirs; do
chks build clean distclean
done
output=$PWD/dist
subdir=.
chks dist
export DESTDIR=$PWD/destdir
output=$PWD/destdir
for subdir in $subdirs; do
chks install
done
And the output:
(64)iwj@mariner:~/work/xen.git$ ~/junk/chks
running -C. suffix= configure build clean distclean ok.
running -C. suffix=-xen build-xen clean-xen distclean-xen ok.
running -C. suffix=-tools configure build-tools clean-tools distclean-tools fail!
running -C. suffix=-stubdom configure build-stubdom clean-stubdom distclean-stubdom ok.
running -C. suffix=-docs configure build-docs clean-docs distclean-docs ok.
running -Cxen suffix= build clean distclean ok.
running -Cdocs suffix= configure build clean distclean ok.
running -Ctools suffix= configure build fail!
running -C. suffix= configure dist ok.
running -C. suffix=-xen dist-xen ok.
running -C. suffix=-tools configure dist-tools ok.
running -C. suffix=-stubdom configure dist-stubdom ok.
running -C. suffix=-docs configure dist-docs ok.
running -C. suffix= configure install ok.
running -C. suffix=-xen install-xen ok.
running -C. suffix=-tools configure install-tools ok.
running -C. suffix=-stubdom configure install-stubdom ok.
running -C. suffix=-docs configure install-docs ok.
running -Cxen suffix= install ok.
running -Cdocs suffix= configure install ok.
running -Ctools suffix= configure install fail!
(64)iwj@mariner:~/work/xen.git$
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Tested-by: M A Young <m.a.young@durham.ac.uk>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
In the original code, top-level dist target unconditionally invokes
dist target for tools/include, which is wrong when tools component is
not enabled.
Make dist-tools depend on dist-tools-public-headers, which depends on
build-tools-public-headers.
Discovered by Travis-CI.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
elease-acked-by: Julien Grall <julien.grall@arm.com>
Build can fail if stubdom build is run before tools build because:
1. tools/include build uses relative path and depends on XEN_OS
2. stubdom needs tools/include to be built, at which time XEN_OS is
mini-os and corresponding symlinks are created
3. libraries inside tools needs tools/include to be built, at which
time XEN_OS is the host os name, but symlinks won't be created
because they are already there
4. libraries get the wrong headers and fail to build
Since both tools and stubdom build need the public headers, we build
tools/include before stubdom and tools. Remove runes in stubdom and
tools to avoid building tools/include more than once.
Provide a new dist target for tools/include. Hook up the install,
clean, dist and distclean targets for tools/include.
The new arrangement ensures tools build gets the correct headers
because XEN_OS is set to host os when building tools/include. As for
stubdom, it explicitly links to the mini-os directory without relying
on XEN_OS so it should be fine.
Reported-by: Steven Haigh <netwiz@crc.id.au>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Steven Haigh <netwiz@crc.id.au>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
There is no reason for the install-stubdom target to depend on
install-tools. It is absolutely reasonable to install new stubdoms
only.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
make distclean does not remove mini-os. Do so when cleaning stubdom.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Update the top-level make help to include all the possible targets and
not reference targets that are deprecated while hopefully being more
clear as to what each target does.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When we create a source code tarball, mini-os is extracted to
extras/mini-os directory. When building a source code tarball, we
shouldn't clone mini-os again.
Only clone mini-os when that directory doesn't exist. This fixes tarball
build and doesn't affect non-tarball build.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Provide mini-os url and revision in Config.mk
Make stubdom targets depend on mini-os-dir target. Make
subtree-force-update{,-all} depend on mini-os-dir-force-update.
Also make mktarball script generate mini-os archive.
Original mini-os directory is renamed to mini-os-intree to help reduce
patch length. That directory will be deleted in a separate patch.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
---
Changes in v3:
1. Put mini-os targets in main Makefile.
2. Stubdom clean and distclean don't depend on mini-os-dir.
Changes in v2:
1. Use hash in Config.mk.
Factor out per-subsystem build/clean/distclean-% targets, so that we can
build subsystems independently in top level directory.
The motive behind this is after splitting out mini-os from Xen tree,
stubdom is in effect a downstream of mini-os. I would like to have the
ability to build it independently and instrument OSSTest to test it.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The variables should have been removed already in
7ed06911dc ("Remove dead qemu code from
toplevel Makefile"), but I did not spot it at this time.
Now it looks like the intention initially was to let the install-tools
depend on tools/qemu-xen-traditional-dir. But that did not work because
there was the typo in the variables (TGT vs. TARGET), and
CONFIG_QEMU_TRAD was not defined anyway.
So remove QEMU_TRAD_DIR_TARGET and QEMU_XEN_DIR_TARGET because they are
not defined at all.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
After commit b0f69ec5c7 ("tools: Make
qemu-xen-traditional build optional.") the existing make targets are
wrapped in ifeq ($(CONF),y), but CONF is never set because
config/Tools.mk is not included.
Drop the dead code. The same effect can be achieved by calling the make
commands directly, after calling configure.
A better approach would be a simple, single 'make $something' which
should be a wrapper around a targets in tools/Makefile that clones,
updates and cleans the subprojects. That has to be worked out in a
different patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The uninstall target does not know about the paths it removes because
the toplevel Makefile does not include the required files.
Move the commands to tools/Makefile because all files come from subdirs
in tools/ anyway. Drop the removal of $(XEN_RUN_DIR) because it gets
created at runtime. Drop the removal of systemd related files because
the wildcard matches everything.
The proper fix is to remove the files and directories in the Makefiles
which install them. But this version is the least intrusive change at
this point.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
At the moment, making a release tarball is an annoyingly manual
process that involves running "git archive" into a temporary directory.
Script this process up and make a target, so that the release manager
can simply type "make src-tarball-release" and have everything show up
nice and neat in dist/xen-$version.tar.gz. "make src-tarball" will
make a version number based on git describe, which will typically have
the most recent tag, number of commits since that tag, and the git
commit id of the current HEAD.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
subtree-force-update will update all subtrees according to the current TAG specified
in Config.mk.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This adds the systemd xen service / module files and integrates
support into the build system.
This goes in with AX_AVAILABLE_SYSTEMD() which will enable
systemd if development libraries have been found on your
build system. If you don't have systemd on target systems
for binaries built with systemd then the binary will not
work, you must explicitly disable systemd support if you
do not want to build systemd support.
When systemd libraries are present only systems that
have booted into systemd go through the systemd initialization,
otherwise the SysVinit is used.
These are originally based on the Fedora systemd files.
Changes made from Fedora's systemd files:
* split sockets into two files to claim different permissions
* Use /bin/sh -c exec to for a simple launcher implementation
* enables systemd socket activation for C xenstored and Ocaml
oxenstored
* use sd_notify(), so change the service to Type=notify, because of
this we remove the PIDFile specification as we don't care for it, and let
systemd do its magic for us, this also means we don't have to fork
so we use --no-fork with systemd
* defines a modules-load.d, its original source file will be shared
between systemd and old init systems
* simplify service files with ConditionVirtualization=xen which uses
the built in systemd virtualization backend detection, these
service files will not be available to start on systems that do not
boot with xen as a hypervisor
* use autoconf to replace @variable@ paths for us which piggy
backs on top of the latest autoconf changes to xen
* removes oxenstored service file in favor of a system variable which
controls which which xentored to use at run time, we avoid multiple
service files this way.
* simplifies startup to not require polling on the sockets
as initial socket management is handled by systemd, we just
take on the socket later once anything pokes at it, a simple nc -U
(as root) on any of the sockets files can activate the service for example.
Anything queued up will be sent to us once we start. Socket activation
should in theory also let us dynamically switch between xenstores but more
importantly we could upgrade xenstored while keeping all active
socket communication queued up, but in order to take advantage of
this we eventually would need to remove the requirement of not being
able to bring down the xenstored. Even though active sockets are
supported since most libxl communication doesn't triggger a check
on the unix socket first administrators are encouraged to enable
the xenstored.service to triggger an initialization of the xenstored
upon bring up. Some systems also never use unix sockets for
communication with the xenstored and as such active sockets will
not be used there.
* allow for xenstored configuration through *either* of these
configuration files:
- /etc/sysconfig/xenstored
- /etc/default/xenstored
The /etc/default/xenstored will let debian based systems do
the same, while SUSE/OpenSUSE/Fedora/RedHat can keep on chugging
with sysconfig. We leave these files all commented out by default
though given that for systemd we want to encourage not using them.
* ensures we create the run directory as most systems will likely
be using a tmpfs for run dirs for the pid files
* Some systems define the selinux context in the systemd Option for the
/var/lib/xenstored tmpfs:
Options=mode=755,context="system_u:object_r:xenstored_var_lib_t:s0"
For the upstream version we remove that and let systems specify the
context on their system /etc/default/xenstored or /etc/sysconfig/xenstored
$XENSTORED_MOUNT_CTX variable, with a default to none.
* takes advantage of the shared xendomains helper for the xendomains
service
* Add the new dom0 that gets kicked off for disk backend access into
its own systemd service associated to xen
We end up with these systemd files:
General requirements:
* proc-xen.mount
* var-lib-xenstored.mount
xenstored:
* xenstored.service
* xenstored.socket
* xenstored_ro.socket
* xenconsoled.service
* xen-qemu-dom0-disk-backend.service.in
Optional:
* xendomains.service
* xen-watchdog.service
As for integration with xen, we house keep all the systemd files
under a new directory tools/hotplug/Linux/systemd/ and will be targeted
by default when building on Linux systems if systemd development
libraries are present at build time.
The systemd files will be sanitized for meta @VARIABLES@ upon
configuration and installed upon the install target. Systems that
do not use systemd can still get systemd service unit files installed
if the build system enabled systemd support, this however does not
mandate a requirement of having systemd libraries present. Old init
scripts are always installed.
If you don't specify a prefix you will end up with the services
files under /usr/local/lib/systemd/system/ by default, and systemd
modules-load.d conf files under /usr/local/lib/modules-load.d/ which
systemd does look for (although it seems this is not documented).
Distributions are expected to provide their /usr/ prefix to end up in
the more generic location upon distribution install at
/usr/lib/systemd/system/ and /usr/lib/modules-load.d/ respectively.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jan Rękorajski <baggins@pld-linux.org>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Jacek Konieczny <jajcus@jajcus.net>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
We haven't shipped a XenoLinux kernel for more releases than I can remember.
We held onto these because osstest was using them but this is no longer the
case.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
for consistency with other foo-dir e.g. qemu, seabios.
Remove obsolete ovmf-find target.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
If this option is given don't bother building qemu-xen ourselves. Likely to be
handy for distros who have an existing qemu package which they want to reuse.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Now that we have upstream qemu people may want to avoid building this extra
code.
There is a little bit of trickery in stubdom/configure.ac to ensure that the
ioemu stubdom is only built if qemu-traditional is enabled.
libxl will return an error if a caller tries to build a domain using
qemu-xen-traditional when this support was disabled at build time. Since
qemu-xen-traditional has been historically tightly bound to the Xen releases I
don't see any value in supporting "3rd party" provision of
qemu-xen-traditional.
We also do not want/need this on ARM therefore default is on for x86 and off
otherwise.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- trivial conflicts in Tools.mk.in and tools/configure.ac.
Reran autogen.sh ]
"debball" by analogy with "tarball". Attempt to clarify the purpose of this
target in the comment.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
These files were left over after
$ git clean -f -dx
$ ./configure
$ make distclean
and picked up by a subsequent.
$ git clean -f -dx
Ensure that these files are also correctly ignored.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Hotplug has been replaced by udev since several years. Remove the
hotplug related files and install udev unconditionally.
This makes it possible to remove udev from rpm BuildRequires which
reduces the buildtime dependency chain. For openSuSE:Factory it was
done just now:
http://lists.opensuse.org/opensuse-buildservice/2012-10/msg00085.html
The patch by itself will have no practical impact unless someone
attempts to build and run a Xen dom0 on a really old base system. e.g.
circa SLES9/2007 or earlier
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
In the toplevel Makefile "install-docs" (depended on by "install" and
hence "dist"), but not "build", ignores errors.
This was inherited from before 24563:4271634e4c86, prior to which the
||true seems intended to handle failures of check_pkgs. Nowadays we
handle docs tools individually in the docs makefiles so there is no
need for this ||true here.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The pattern used is very broad and will delete any kernel with xen in
its filename, likewise modules, including those which come packages
from the distribution etc.
I don't think this was ever the right thing to do but it is doubly
wrong now that Xen does not even build or install a kernel by default.
Push cleanup of the installed hypervisor down into xen/Makefile so that
it can cleanup exactly what it actually installs.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Looks-good: Jan Beulich <JBeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The xenstore header xs.h is producing conflicts with other software[1].
xs is a too short identifier and does not matche the library. Renaming
the headers to xenstore.h and xenstore_lib.h is the easiest way to make
them easy recognizable and prevent furthe problems.
[1]: http://bugs.debian.org/668550
[ Also update QEMU_TAG, to bring in corresponding change to
qemu-xen-traditional. -iwj ]
Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
--HG--
rename : tools/xenstore/xs.h => tools/xenstore/xenstore.h
rename : tools/xenstore/xs_lib.h => tools/xenstore/xenstore_lib.h
We already have xenversion as a target in the xen subdirectory;
simply extend it so that "make xenversion" does what you'd expect.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Added autotools magic to replace custom check scripts. The previous
checks have been ported to autoconf, and some additional ones have
been added (plus the suggestions from running autoscan). Two files are
created as a result from executing configure script, config/Tools.mk
and config.h.
conf/Tools.mk is included by tools/Rules.mk, and contains most of the
options previously defined in .config, that can now be set passing
parameters or defining environment variables when executing configure
script.
config.h is only used by libxl/xl to detect yajl_version.h.
[ tools/config.sub and config.guess copied from
autotools-dev 20100122.1 from Debian squeeze i386,
which is GPLv2.
tools/configure generated using the included ./autogen.sh
which ran autoconf 2.67-2 from Debian squeeze i386. autoconf
is GPLv3+ but has a special exception for the autoconf output;
this exception applies to us and exempts us from complying
with GPLv3+ for configure, which is good as Xen is GPL2 only.
- Ian Jackson ]
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Tested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Jan Beulich