The contents of /proc/uptime is typically something like "80164.57
640617.58", so the existing 512 byte buffer is more than large enoguh,
so reduce its effective size to 511 bytes and ensure we include a
NULL.
Otherwise Coverity points out that we pass a potentially unterminated
string to strtok. In practice this likely doesn't actually cause
issues (at least on Linux) because the
string should always contain a space so we will stop parsing.
CID: 105590
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Dom0 is handled separately (via print_dom0_uptime) and the domU
variant doesn't work for dom0 since libxl_vm_get_start_time() doesn't.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We assert that nullfd if not std{in,out,err} since that would result
in closing one of the just dup2'd fds. For this to happen
std{in,out,err} would have needed to be closed, at which point all
sorts of other things could go wrong.
CID: 1130519
It was previously hypothesised[0] that fixing 1130516 would solve this
too, but that appears to not have been the case.
Compile tested only.
[0] http://lists.xenproject.org/archives/html/xen-devel/2013-11/msg02931.html
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: andrew.cooper3@citrix.com
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduce enum type libxl_checkpointed_stream in IDL.
rename the last argument of migrate_receive from "remus" to
"checkpointed" since the semantics of this parameter has
changed.
NOTE:
libxl_domain_restore_params and domain_create aren't changed here,
checkpointed_stream is still an int. Because we will pass the
value from libxl to libxc.
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently the fd is opened and then later closed and
restore_fd_to_close set back to -1, however there are several goto out
and goto error_out paths in the interim.
Since the code resets restore_fd_to_close to -1 it is OK to check this
and close on the out path too.
CID: 1055897
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Using bare realloc risks leaking the old pointer if the realloc fails.
Since xrealloc exits on such failures, drop the error handling.
Noticed while fixing, but not related to, CID 1055898.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We don't need to free anything extra from Dom0 in order to perform soft
reset. It can also fail soft reset if it happens that we don't have this
memory (which we don't need) available.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When restarting or shutting down dom0 the xendomains script tries to
stop all other domains. Don't do this for the xenstore domain, as it
might survive a dom0 reboot in the future.
The same applies to xl shutdown --all. Here the xenstore domain is
flagged as "never stop".
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Replace the firmware loaded into HVM guests with an OS kernel. Since the HVM
builder now uses the PV xc_dom_* set of functions this kernel will be parsed
and loaded inside the guest like on PV, but the container is a pure HVM
guest.
Also, if device_model_version is set to none or a device model for the
specified domain is not present unconditinally set the nic type to
LIBXL_NIC_TYPE_VIF.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Try to use "xen-qemuuser-domid$domid" first, then
"xen-qemuuser-shared" and root if everything else fails.
The uids need to be manually created by the user or, more likely, by the
xen package maintainer.
Expose a device_model_user setting in libxl_domain_build_info, so that
opinionated callers, such as libvirt, can set any user they like. Do not
fall back to root if device_model_user is set. Users can also set
device_model_user by hand in the xl domain config file.
QEMU is going to setuid and setgid to the user ID and the group ID of
the specified user, soon after initialization, before starting to deal
with any guest IO.
To actually secure QEMU when running in Dom0, we need at least to
deprivilege the privcmd and xenstore interfaces, this is just the first
step in that direction.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In fact, right now, failing at destroying a cpupool is just
not reported to the user in any explicit way.
Let's log an error, as it is customary for xl in these cases.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Rearange the case when we check the new number of vCPUs
against the number of host pCPUs not to use rc for internal
error reporting. In fact:
- rc was at risk of being used uninitialised;
- rc should only be used for holding libxl error codes.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In 5b725e56 (xl: improve return and exit codes of vcpu related
functions), the return value of libxl_cpu_bitmap_alloc was not stored in
rc anymore. Yet the subsequent fprintf still used that.
Reinstate the original implementation, that is, to store return value of
libxl_cpu_bitmap_alloc in rc before using rc.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Turning parsing related functions exit codes towards using the
EXIT_[SUCCESS|FAILURE] constants, instead of instead of arbitrary numbers
or libxl return codes.
- for main_*: arbitrary -> EXIT_SUCCESS|EXIT_FAILURE.
- for internal fucntion: arbitrary -> 0/1.
Don't touch parse_config_data() which is big enough to deserve its own patch.
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Turning cpupools related functions exit codes towards using the
EXIT_[SUCCESS|FAILURE] constants, instead of instead of arbitrary numbers
or libxl return codes.
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Turning scheduling related functions exit codes towards using the
EXIT_[SUCCESS|FAILURE] constants, instead of instead of arbitrary numbers
or libxl return codes.
- for main_*: arbitrary -> EXIT_SUCCESS|EXIT_FAILURE.
- for internal fucntion: arbitrary -> 0/1.
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
def_getopt would print a message to stderr, but blunder on anyway.
Sadly this is probably not a backport candidate.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This is the xl/xc changes to support Intel Code/Data Prioritization.
CAT xl commands to set/get CBMs are extended to support CDP.
Add new CDP options with CAT commands in xl interface man page.
Add description of CDP in xl-psr.markdown.
Signed-off-by: He Chen <he.chen@linux.intel.com>
Reviewed-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
The entries returned from libxl_psr_cat_get_l3_info are assumed
to be socket-continuous. But this is not true in the hotplug case.
This patch gets the socket bitmap for all the sockets on the system
first and stores the socket id in the structure libxl_psr_cat_info in
libxl_psr_cat_get_l3_info. The xl or similar consumers then can display
socket information correctly.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When displaying the CMT information for all the sockets, we assume socket
number is continuous. This is not true in the hotplug case. For instance,
when the 3rd socket is plugged out on a 4-socket system, the available
sockets numbers are 1,2,4 but current we will display the CMT
information for socket 1,2,3.
The fix is getting the socket bitmap for all the sockets on the system
first and then displaying CMT information for_each_set_bit in that bitmap.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Although we already have 'gfx_passthru' in b_info, this doesn't suffice
after we want to handle IGD specifically. Now we define a new field of
type, gfx_passthru_kind, to indicate we're trying to pass IGD. Actually
this means we can benefit this to support other specific devices just
by extending gfx_passthru_kind. And then we can cooperate with
gfx_passthru to address IGD cases as follows:
gfx_passthru = 0 => sets build_info.u.gfx_passthru to false
gfx_passthru = 1 => sets build_info.u.gfx_passthru to true and
build_info.u.gfx_passthru_kind to DEFAULT
gfx_passthru = "igd" => sets build_info.u.gfx_passthru to true
and build_info.u.gfx_passthru_kind to IGD
Here if gfx_passthru_kind = DEFAULT, we will call
libxl__is_igd_vga_passthru() to check if we're hitting that table to need
to pass that option to qemu. But if gfx_passthru_kind = "igd" we always
force to pass that.
And "-gfx_passthru" is just introduced to work for qemu-xen-traditional
so we should get this away from libxl__build_device_model_args_new() in
the case of qemu upstream.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Use existing create/restore path to perform 'soft reset' for HVM
domains. Tear everything down, e.g. destroy domain's device model,
remove the domain from xenstore, save toolstack record and start
over.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
While "ioport" list element parsing already validates that the entire
input string got consumed, its two siblings so far didn't.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When user specifies vnuma = [], we need to skip the whole parser
function, otherwise the parser sets b_info->max_memkb to garbage value.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As a preparation before adding new restart type (soft reset) put all
restart types into an enum.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Use letter 'S' to indicate a domain in such state. Introduce new
'on_soft_reset' action and default it to 'restart' for now.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
... but allow user to override that check by specifying maxvcpus= in xl
configuration file.
Note that the code is constructed such that the fallout is dealt with
after parsing. We can live with that because though it wastes a bit of
cpu cycles but it is still functionally correct and I would like to have
a clear split between parsing and dealing with fallouts.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
We should parse the output from splitting function, not the original
string, otherwise the parsed result is wrong.
For example:
vnuma = [ [...,"vdistance=10,20",...],
[...,"vdistance=20,10",...] ]
Before this change, vdistance from node 0 to all nodes (including
itself) was 10 and vdistance from node 1 to all nodes was 20.
After this change, vdistance from node 0 to itself is 10, to node 1 is
20 and vdistance from node 1 to node 0 is 20, to itself is 10. That's
the correct vdistance settings we expect.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Initialise polFd to -1 before hand to avoid closing 0 by accident.
Also fixed some style problems while I was there.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Always call init and dispose function on info_buf though it's not
always used.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In ea214001 ("x86/altp2m: add altp2mhvm HVM domain parameter"), a
check was added to ensure nestedhvm and altp2m cannot be enabled at
the same time. That check was added in xl, but in fact it should be in
libxl because it should be the entity that decides whether
the provided configuration is valid.
This patch moves the check to libxl. The code snippet is moved after
calling libxl__domain_build_info_setdefault so that we can:
1. remove libxl_defbool_is_default in `if()';
2. detect mistake in libxl__domain_build_info_setdefault.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Pid is a null terminated string allocated by asprintf. It should be
freed after use.
Also fixed a coding style problem while I was there.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This patch parses to enable user configurable parameters to specify
RDM resource and according policies which are defined previously,
Global RDM parameter:
rdm = "strategy=host,policy=strict/relaxed"
Per-device RDM parameter:
pci = [ 'sbdf, rdm_policy=strict/relaxed' ]
Default per-device RDM policy is same as default global RDM policy as being
'relaxed'. And the per-device policy would override the global policy like
others.
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: Ian Campbell <ian.campbell@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In fact, right now, the following (legitimate)
configuration:
vcpus = '4'
vnuma = [ [ "pnode=0","size=512","vcpus=0,1","vdistances=10,20" ],
[ "pnode=1","size=512","vcpus=2,3","vdistances=20,10" ] ]
Produces the following error:
# xl create /etc/xen/test.cfg
Parsing config from /etc/xen/test.cfg
xl: maxvcpus < vcpu
That is because, we only process the first element of the
"vcpus=" list (of each vnode specification). Therefore,
in the above case, we only see 2 vcpus, out of 4, being
assigned to the vnodes, and hence the error.
What we need is either a multidimentional array, or a
bitmap, to temporary store the vcpus of a vnode, while
parsing the vnuma config entry. Let's use the latter,
which happens to also make it easier to copy the outcome
of the parsing to its final destination in b_info, if
everything goes ok.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
xl subcommands ought all to take -h. def_getopt and hence
SWITCH_FOREACH_OPT already handles 'h' by calling helpstr. None of
the call sites see the 'h'.
In this patch:
* Change SWITCH_FOREACH_OPT to always add a "h" to the short opts
string, using string concatenation.
* Remove the now-redundant h's from some existing option strings.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This limit of 11 has been in this function since it was written, but
serves no purpose. The extra arguments are fed one by one to
parse_nic_config, and it is possible to have as many as you like.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Ian Campbell
Wen Congyang
Dario Faggioli
Vitaly Kuznetsov
Juergen Gross
Roger Pau Monne
Stefano Stabellini
Wei Liu
Harmandeep Kaur
Ian Jackson
He Chen
Chao Peng
Tiejun Chen
Jan Beulich
Ed White