Currently it doesn't block running, anyway, it better fix the small
bug considering if in the future HVM_MAX_VCPUS will not necessarily be
8x value.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>=
Due to FLR capability of IGD is not exposed on some platforms, this
patch uses vendor specific FLR to reset those IGDs.
Signed-off-by: Weidong Han <weidong.han@intel.com>
A migrated domain keeps on running even though its disk doesn't
exist. This situation must be undesirable.
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
This patch exposes the flask_access, flask_avc_cachestats,
flask_avc_hashstats, flask_getavc_threshold, flask_setavc_threshold,
and flask_policyvers functions to user-space. A python wrapper was
created for the flask_access function to facilitate policy based
user-space access control decisions. flask.h was renamed to libflask.h
to remove a naming conflict.
Signed-off-by : Machon Gregory <mbgrego@tycho.ncsc.mil>
Attached patch fixes sysfs error path.
NetBSD also has a /proc/mounts file but no sysfs.
On Linux you can test this with sysfs not mounted.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
vm.image does not exist at this point in the restore process.
I haven't looked at the memory_sharing code. It's likely something
better is needed to make that work across relocation.
Signed-off-by: Brendan Cully <brendan@cs.ubc.ca>
Converting an Python Int, sizeof(long) already returns byte length
rather than bit length so do not divide-by-8.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
nodes without memory will currently be disabled by also moving the
physical cores connected to them to other nodes. This leads to nodes
without CPUs and thus to a division by zero in the node allocation
algorithm. Attached patch fixes this by checking for 0 before the
division. This fixes domain creation on boxes with memory-less nodes.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Enumerate the best nodes and add CPU affinity until all VCPUs can be
backed by at least one physical core. This should fix problems with
asymmetric NUMA configurations and cropped number of CPUs in Xen.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
pci global options and per-device options for HVM device model have
been broken for some time, the patch tries to fix the problem. It:
* maintains global options in xend, and merge it into
per-device option when creating the backend
* merge the global options also into the parameter of pci-ins
dm-command
The second one is there because the backend is effectively skipped
in ioemu at present, ioemu solely relies on the parameter string to
create the device.
Cc: Simon Horman <horms@verge.net.au>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Qing He <qing.he@intel.com>
To workaround a race condition about guest hotplug, c/s
18338:7c10be016e4 disabled do_FLR when we create guest or 'xm
pci-attach' device into guest, so now we actually only do_FLR when a
guest is destroyed or 'xm pci-detach'.
By moving the FLR-related checking/do_FLR logic a little earlier, this
patch re-enables do_FLR in these 2 cases disabled by 18338.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Introduce new 'monitor_path' parameter, so that 'monitor' can revert
to its old type and meaning.
Fixes domain reboot and save/restore.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Allows par/ser ports to be configured with a path to backing device.
Allows qemu monitor to be disabled or redirected.
Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
the tapdisk2 process if sharing is enabled (tapdisk2 is not normally aware what
domain it is working for).
Signed-off-by: Grzegorz Milos <Grzegorz.Milos@citrix.com>
accordingly
-- currently firmware has got 'vcpus' from xend, this patch add parse
'vcpu_avail' to firmware;
-- setup madt 'lapic' subitems of processors accoring to vcpus and
vcpu_avail which finally come from config;
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
/etc/xen/xmexample.hvm says "" means "leave to Xen to pick", but we
get a "Error: string index out of range" currently.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
the "guest to a single NUMA node" constrain algorithm does not work
well when we do ballooning. Ballooning and NUMA don't play together
anyway, as Dom0 and thus ballooning is not NUMA aware, I am working on
this but it will not be ready for the Xen 4.0 release window. The
usual ballooning situation will result in an empty candidate list, as
no node has enough free memory to host the guest. In this case the
code will simply pick the first node: again and again, because all
nodes without enough memory will be ultimately penalized with the same
maxint value (regardless of the actual load). The attached patch will
change this to use a relative penalty in case of not-enough memory, so
that low-load low-memory nodes will be used at one point. A half
loaded node has shown to be a good value, as an unbalanced system is
much worse than non-local memory access for guests. Regardless of
that you should restrict the Dom0 on a NUMA system to a reasonable
memory size, so that ballooning is not necessary most of the time. In
this case the guest's memory will be NUMA local.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
You can see the following slides to understand the usage.
http://www.xen.org/files/xensummit_intel09/PVUSBStatusUpdate.pdf
Limitations:
"xm usb-hc-create" accepts up to 16 ports, but, current usbfront
can work with up to 15 ports. This may be bug and I'm preparing
to fix it.
This xm/xend support requires linux-2.6.18-xen.hg c/s 939 or above.
I recommend latest tip.
Signed-off-by: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
Doesn't work when build-time python path differs from install-time. Do
we care about this given tools should be packaged/built for the
specific run-time distro?
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
I submitted a patch a while back to add keymap to vfb config for hvm
guests. This patch works fine for new config (xm create|new) but not
existing, managed guests. To cover the latter case I've introduced a
validator method in XendConfig.
Signed-off-by: Jim Fehlig <jfehlig@novell.com>
The main idea of this patch is:
1) The admin sets aside some memory below 128G for 32-bit paravirtual
domain creation (via dom0_mem=-<value> in kernel comand line).
2) The admin also explicitly states to the tools (i..e xend) how much
memory is supposed to be left untouched by 64-bit domains
3) If a 32-bit pv DomU gets created, no ballooning ought to be
necessary (since if it is, no guarantee can be made about the address
range of the memory ballooned out), and memory gets allocated from the
reserved range.
4) Upon 64-bit (or 32-bit HVM or HVM) DomU creation, the tools
determine the amount of memory to be ballooned out of Dom0 by adding
the amount needed for the new guest and the amount still in the
reserved pool (and then of course subtracting the total amount of
memory the hypervisor has available for guest use).
Signed-off-by: james song (wei) <jsong@novell.com>
BaseException.message has been deprecated since Python 2.6. To
prevent DeprecationWarning from popping up over this pre-existing
attribute, use a new property that takes lookup precedence.
Signed-off-by: Wei Kong <weikong.cn@gmail.com>
Keir Fraser