In b59f87f56b1e, the defaults for some of the directory config
variables implicitly changed. In this commit we arrange for the
defaults to be auto-detected (with the same logic as the run-time
scripts use).
This will make the build more likely to produce answers which the
builder intends. (And, in particular, it should un-break the
automated tests, which didn't set these variables explicitly and
therefore got broken by b59f87f56b1e.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduce CONFIG_LEAF_DIR, SUBSYS_DIR, INITD_DIR variables to cope
better with variation between distributions.
See docs/misc/distro_mapping.txt for details.
Signed-off-by: Bruce Edge <bruce.edge@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch implements the new protocol for handling pv consoles and
emulated serials as described in the document docs/misc/console.txt.
The changes are:
- xenconsoled: do not write the pty under serial in xenstore if
xenconsoled is handling a consolepath;
- xenconsole: implement support for an explicit console type parameter;
the parameter can be "pv", to specify that the user wants to
connect to a pv console, or "serial", to specify that the user wants to
connect to an emulated serial. If the type parameter hasn't been
specified be the user, xenconsole tries to guess which type of console
it has to connect to, defaulting to pv console for pv guests and
emulated serial for hvm guests.
- xenconsole: use the new xenstore paths;
- libxl: rename libxl_console_constype to libxl_console_consback:
constype is used to to specify whether qemu or xenconsoled provides the
backend, so I renamed it to libxl_console_consback to make it more
obvious that we are talking about backends;
- libxl: add a new libxl_console_constype to specify if the console is
an emulated serial or a pv console;
- libxl: support the new xenconsole "type" command line parameter;
- libxl: use the "output" node under console in xenstore to tell qemu
where do we want the output of this pv console to go;
- remove the legacy "serialpath" from xenconsoled altogether
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Also: update the QEMU_TAG to pull in the qemu part of these changes.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
The man page for xm command states that many commands acts
asynchronously which is not true. According to my experience most
commands does act synchronously with several exceptions, like create,
shutdown, mem-set and vcpu-set commands so this fixes the paragraph
available in this xm man page.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Add support for Xen ocontext records to enable device polices. The
default policy will not be changed and instructions have been added to
enable the new functionality. Examples on how to use the new policy
language have been added but commented out. The newest version of
checkpolicy (>= 2.0.20) and libsepol (>= 2.0.39) is needed in order to
compile it. Devices can be labeled and enforced using the following
new commands; pirqcon, iomemcon, ioportcon and pcidevicecon.
Signed-off-by : George Coker <gscoker@alpha.ncsc.mil>
Signed-off-by : Paul Nuzzi <pjnuzzi@tycho.ncsc.mil>
and PV/ramdisk
Add support for 'file:' and 'data:' URI schemes for the parameters
'PV/kernel' and 'PV/ramdisk' in the VM.create() call. The 'data:'
scheme handling enables using a file which is stored inside the
management system (from where the XenAPI call is send) as kernel or
ramdisk.
Notes:
o all included: a detailed description can be found in the xenapi
documentation
o bumped up the version of the API document to 1.0.8 (because of
(minimal) interface extension)
o Future enhancements (like http:, ftp: schemes) fit seamlessly into
the current design / classes
o Unittest cases and xm-test case included
Signed-off-by: Andreas Florath <xen@flonatel.org>
Update the XSM Flask documentation to reflect the support for
policy.24, the updated policy and policy build infrastructure, and how
to enable the optional MLS policy.
Signed-off-by: Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: George S. Coker, II <gscoker@alpha.ncsc.mil>
Add support for 'file:' and 'data:' URI schemes for the parameters
'PV/kernel' and 'PV/ramdisk' in the VM.create() call. The 'data:'
scheme handling enables using a file which is stored inside the
management system (from where the XenAPI call is send) as kernel or
ramdisk.
Notes:
o all included: a detailed description can be found in the xenapi
documentation
o bumped up the version of the API document to 1.0.8 (because of
(minimal) interface extension)
o Future enhancements (like http:, ftp: schemes) fit seamlessly into
the current design / classes
Signed-off-by: Andreas Florath <xen@flonatel.org>
Since the shared info layout is fixed, guests are required to use
VCPUOP_register_vcpu_info prior to booting any vCPU beyond the
traditional limit of 32.
MAX_VIRT_CPUS, being an implemetation detail of the hypervisor, is no
longer being exposed in the public headers.
The tools changes are clearly incomplete (and done only so things
would
build again), and the current state of the tools (using scalar
variables all over the place to represent vCPU bitmaps) very likely
doesn't permit booting DomU-s with more than the traditional number of
vCPU-s. Testing of the extended functionality was done with Dom0 (96
vCPU-s, as well as 128 vCPU-s out of which the kernel elected - by way
of a simple kernel side patch - to use only some, resulting in a
sparse
bitmap).
ia64 changes only to make things build, and build-tested only (and the
tools part only as far as the build would go without encountering
unrelated problems in the blktap code).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
In some configurations, when dom0 is busy with I/O, it may take
several minutes to complete all hotplug scripts required when a new
domain is being created. As device create timeout is set to 100
seconds, users get "hotplug scripts not working" error instead of a
new domain.
This patch makes both DEVICE_CREATE_TIMEOUT and DEVICE_DESTROY_TIMEOUT
configurable in xend-config.sxp to allow users to easily adapt hotplug
timeouts to their environment.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
- A simple txt howto based on previous list discussions and observations
- A oneliner patch to address a compiler type cast error for x86_64
Signed-off-by: George S. Coker, II <gscoker@alpha.ncsc.mil>
I've been asked too many times about a hint in xm man page on how to
'detach' from a guest console - aka Ctrl+]
Signed-off-by: Jim Fehlig <jfehlig@novell.com>
This has finally bugged me enough to do something about it:
make prints `***' when it stops due to an error. With make -j, and/or
with automated build systems, this error marker can be in the middle
of a large logfile. It is useful to be able to search for it.
Therefore change occurrences of `*' to `=' for information and warning
messages. `***' is reserved for cases where the build stops.
A corresponding change is being applied to qemu-xen-unstable.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add "iommu=1" option in grub, due to VT-d is not enabled by default.
In addition, describes how to enable MSI/MSI-x for assigned devices.
Signed-off-by: Weidong Han <weidong.han@intel.com>
1. Only useful for NUMA systems, so turn it off on non-NUMA systems by
default.
2. On NUMA systems, by default relate the DMA heap size to NUMA node 0
memory size (so that not all of node 0's memory ends up being 'DMA
heap').
3. Remove the 'dma emergency pool'. It's less useful now that running
out of low memory isn;t as fatal as it used to be (e.g., when we
needed to be able to allocate low-memory PAE page directories).
Based on patches by Andre Przywara and Xiaowei Yang.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
limitation note because Xen has supported MSI, and add link of VT-d
howto on xen wiki for more information about VT-d enabled systems.
Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Ian Jackson
Keir Fraser
Stefano Stabellini