When the toolstack modifies memory of a running ARM VM it may happen
that the underlying memory of a current vCPU PC is changed. Without
flushing the icache the vCPU may continue executing stale instructions.
Also expose the xc_domain_cacheflush through xenctrl.h.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This allows a toolstack to identify whether a running domain is using hardware
assisted paging or not.
The appropriate tests differ by architecture, so introduce
arch_get_domain_info(). ARM unconditionally sets the new flag, while x86
checks with the paging subsystem first.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
We change the xen_version libxc code to use the new hypercall.
Which of course means every user in the code base has to
be changed over.
It is important to note that the xc_version_op has a different
return semantic than the previous one. It returns negative
values on error (like the old one), but it also returns
an positive value on success (unlike the old one). The positive
value is the number of bytes copied in.
Note that both Ocaml and xenstat use tabs instead of four
spaces so they look quite odd.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com> [for the Ocaml stubs]
Acked-by: George Dunlap <george.dunlap@eu.citrix.com> [xenctx bits]
Acked-by: Wei Liu <wei.liu2@citrix.com>
When mapping large BARs (e.g. the frame buffer of a graphics card) the
overhead of establishing such mappings using only 4k pages has,
particularly after the XSA-125 fix, become unacceptable. Alter the
XEN_DOMCTL_memory_mapping semantics once again, so that there's no
longer a fixed amount of guest frames that represents the upper limit
of what a single invocation can map. Instead bound execution time by
limiting the number of iterations (regardless of page size).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Currently in ioreq server, guest write-protected ram pages are
tracked in the same rangeset with device mmio resources. Yet
unlike device mmio, which can be in big chunks, the guest write-
protected pages may be discrete ranges with 4K bytes each. This
patch uses a seperate rangeset for the guest ram pages.
To differentiate the ioreq type between the write-protected memory
ranges and the mmio ranges when selecting an ioreq server, the p2m
type is retrieved by calling get_page_from_gfn(). And we do not
need to worry about the p2m type change during the ioreq selection
process.
Note: Previously, a new hypercall or subop was suggested to map
write-protected pages into ioreq server. However, it turned out
handler of this new hypercall would be almost the same with the
existing pair - HVMOP_[un]map_io_range_to_ioreq_server, and there's
already a type parameter in this hypercall. So no new hypercall
defined, only a new type is introduced.
Signed-off-by: Shuai Ruan <shuai.ruan@linux.intel.com>
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
libxencall will provide a stable API and ABI for calling hypercalls
(although those hypercalls themselves may not have a stable API). As
well as the hypercall buffer infrastructure needed in order to safely
provide pointer arguments to hypercalls.
libxenctrl encapsulates a instance of this interface, so users of that
library are not currently subjected to any actual changes. However all
hypercalls made internally by libxc now use the correct interface. It
is expected that most users of this library will be other libraries
providing a higher level interface, rather than applications directly.
Only the basic functionality to allocate hypercall safe memory is
moved, the type safe stuff and bounce buffers remain in libxc.
Note that the functionality to map foreign pages using privcmd is not
yet moved, meaning that an xc_interface will now contain two open
privcmd file descriptors. Foreign memory mapping is logically separate
functionality and will be moved into its own library.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
Support the xenstore domain flag for obtaining domain info.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
With the addition of HVMlite the hypervisor now always requires a non-null
arch domain config, which is different between HVM and PV guests.
Add a new parameter to xc_domain_create that contains a pointer to an arch
domain config. If the pointer is null, create a default arch domain config
based on guest type.
Fix all the in-tree callers to provide a null arch domain config in order to
mimic previous behaviour.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently do_memory_op() is returning int, while the hypervisor is
returning long. This will lead to wrong return informations as soon as
e.g. a pfn larger than about 2 billion (8 TB) is returned.
Use the correct long return type instead and correct the functions
expecting a pfn via the return value of do_memory_op().
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The test for 'nr_vmemranges < nr_vnodes' in xc_domain_setvnuma() was
originally writtten with the idea that number of memory ranges would
at least be equal to number of nodes.
We may want to specify nodes with no memory, however, and thus this
check should be removed.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
The DOMCTLs {,un}bind_pt_irq are using uint32_t for the machine_irq
while the helper is using uint8_t.
Currently on ARM, we are supporting SPIs whose irq number can go up to
1019 which doesn't fit in an uint8_t. The helpers xc_domain_bind_pt_spi
and xc_domain_unbint_pt_spi are correctly taking an uint16_t so the
libxc was truncating without noticing the user which may end up to
route the wrong IRQ.
Fix the problem by widening the machine_irq parameter in
xc_domain_*bind_pt_irq_int.
Note that XEN_DOMCTL_irq_permission has the same problem but it's not
used at the moment on ARM. So we can defer the changes after the release
of Xen 4.7.
Reported-by: Iurii Konovalenko <iurii.konovalenko@globallogic.com>
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This will reflect that we effectively emulate the same version as the
hardware GIC for the guest.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The number of slots per page being 511 (i.e. not a power of two) means
that the (32-bit) read and write indexes going beyond 2^32 will likely
disturb operation. Extend I/O req server creation so the caller can
indicate that it is using suitable atomic accesses where needed (not
all accesses to the two pointers really need to be atomic), allowing
the hypervisor to atomically canonicalize both pointers when both have
gone through at least one cycle.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
There is no need to have this twice and we can simply inline
xen_guest_tsc_info into xen_domctl_tsc_info as well.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Said commit ("libxl_set_memory_target: retain the same maxmem offset on
top of the current target") caused a regression for "xl mem-set"
against Dom0: While prior to creation of the first domain this works,
the first domain creation involving ballooning breaks. Due to "enforce"
not being set in the domain creation case, and due to Dom0's initial
->max_pages (in the hypervisor) being UINT_MAX, the calculation of
"memorykb" in the first "xl mem-set" adusting the target upwards
subsequent to domain creation and termination may cause an overflow,
resulting in Dom0's maximum getting to a very small value. This small
maximum will the make the subsequent setting of the PoD target fail.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A device node is described by a path. It will be used to retrieve the
node in the device tree and assign the related device to the domain.
Only non-PCI devices protected by an IOMMU can be assigned to a guest.
Also document the behavior of XEN_DOMCTL_deassign_device in the public
headers which differ between non-PCI and PCI.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
On x86, an IRQ is assigned in 2 steps to an HVM guest:
- The toolstack is calling PHYSDEVOP_map_pirq in order to create a
guest PIRQ (IRQ bound to an event channel)
- The emulator (QEMU) is calling DOMCTL_bind_pt_irq in order to
bind the IRQ
On ARM, there is no concept of PIRQ as the IRQ can be assigned to a
virtual IRQ using the interrupt controller.
It's not clear if we will need 2 different hypercalls on ARM to assign
IRQ and, for now, only the toolstack will manage IRQ.
In order to avoid re-using a fixed ABI hypercall (PHYSDEVOP_*) for a
different purpose and allow us more time to figure out the right out,
only DOMCTL_{,un}bind_pt_pirq is implemented on ARM.
The DOMCTL is extended with a new type PT_IRQ_TYPE_SPI and only IRQ ==
vIRQ (i.e machine_irq == spi) is supported.
In order to keep the same XSM checks done by the 2 hypercalls on x86,
call both xsm_map_domain_irq & xsm_bind_pt_irq in the ARM implementation.
Note: The toolstack changes for routing an IRQ to a guest will be done
in a separate patch.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Cc: Jan Beulich <jbeulich@suse.com>
Each domain may have a different number of IRQs depending on the devices
assigned to it.
Rather than re-using the number of IRQs used by the hardwared GIC, let
the toolstack specify the number of SPIs when the domain is created.
This will avoid wasting memory.
To calculate the number of SPIs, we take advantage of the fact that the
libxl interface can only expose 1:1 mapping and look for the largest SPI
in the list.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Wei Liu <wei.liu2@citrix.com>
In preparation for allowing for introspecting ARM and PV domains the old
control interface via the hvm_op hypercall is retired. A new control mechanism
is introduced via the domctl hypercall: monitor_op.
This patch aims to establish a base API on which future applications can build
on.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Tim Deegan <tim@xen.org>
On ARM the virtual GIC may differ between each guest (emulated GIC version,
number of SPIs...). This information is already known at the domain creation
and can never change.
For now only the gic_version is set. In the long run, there will be more
parameters such as the number of SPIs. All will be required to be set at the
same time.
A new arch-specific structure arch_domainconfig has been created, the x86
one doesn't have any specific configuration, for now, a dummy structure
(C-spec compliant) has been created.
Some external tools (qemu, xenstore) may be required to create a domain.
Rather than asking them to take care of the arch-specific domain
configuration, let the current function (xc_domain_create) chose a
default configuration and introduce a new one (xc_domain_create_config).
This patch also drops the previously introduced DOMCTL arm_configure_domain
in Xen 4.5, as it has been made useless.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Keir Fraser <keir@xen.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Said hypercall for large BARs can take quite a while. As such
we can require that the hypercall MUST break up the request
in smaller values.
Another approach is to add preemption to it - whether we do the
preemption using hypercall_create_continuation or returning
EAGAIN to userspace (and have it re-invocate the call) - either
way the issue we cannot easily solve is that in 'map_mmio_regions'
if we encounter an error we MUST call 'unmap_mmio_regions' for the
whole BAR region.
Since the preemption would re-use input fields such as nr_mfns,
first_gfn, first_mfn - we would lose the original values -
and only undo what was done in the current round (i.e. ignoring
anything that was done prior to earlier preemptions).
Unless we re-used the return value as 'EAGAIN|nr_mfns_done<<10' but
that puts a limit (since the return value is a long) on the amount
of nr_mfns that can provided.
This patch sidesteps this problem by:
- Setting an hard limit of nr_mfns having to be 64 or less.
- Toolstack adjusts correspondingly to the nr_mfn limit.
- If the there is an error when adding the toolstack will call the
remove operation to remove the whole region.
The need to break this hypercall down is for large BARs can take
more than the guest (initial domain usually) time-slice. This has
the negative result in that the guest is locked out for a long
duration and is unable to act on any pending events.
We also augment the code to return zero if nr_mfns instead
of trying to the hypercall.
This is XSA-125 / CVE-2015-2752.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The commit a8f8a590e0
"libxc: Check xc_domain_maximum_gpfn for negative return values"
introduced an regression in tools outside libxc (migrate v2)
which wanted the unfiltered GPFN value. Said commit added
a wrapper which added +1 if there were no errors.
To make it work pre-commit a8f8a59 we add an xc_domain_nr_gpfns
which will add +1 if there are no errors (and change all in-tree
callers to use it). The xc_domain_maximum_gpfn will return the
unfiltered GPFN value.
Suggested-by: Ian Campbell <ian.campbell@citrix.com>
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Instead of assuming everything is always OK. We stash
the gpfns value as an parameter. Since we use it in three
of places we might as well update xc_domain_maximum_gpfn
to do the right thing.
Suggested-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
We don't need to put fill errno because xc_hypercall_buffer_alloc
fills the errno with the appropriate errno values and we just
need to pass them up the stack.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
XEN_DOMCTL_destroydomain so far is being special cased in libxc to
reinvoke the operation when getting back EAGAIN. Quite a few other
domctl-s have gained continuations, so I see no reason not to use them
here too.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
No-one (including me) paid attention during review that these
structures don't adhere to the naming requirements of the public
interface: Consistently use xen_ prefixes at least for all new
additions.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The vGIC will emulate the same version as the hardware. The toolstack has
to retrieve the version of the vGIC in order to be able to create the
corresponding device tree node.
A new DOMCTL has been introduced for ARM to configure the domain. For now
it only allow the toolstack to retrieve the version of vGIC.
This DOMCTL will be extend later to let the user choose the version of the
emulated GIC.
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xc_unmap_domain_meminfo uses P2M_FLL_ENTRIES macro instead of P2M_FL_ENTRIES.
Moreover, P2M_FL_ENTRIES macro uses (dinfo->p2m_size) which is always 0 here
as we don't initialize it. The result is that we always unmap just 1 frame.
xc_map_domain_meminfo uses P2M_FLL_ENTRIES macro instead of P2M_FL_ENTRIES
on failure path.
The issue went unnoticed mostly because we use unmap_domain_meminfo and
xc_map_domain_meminfo in one-shot xen-mfndump and xen-hptool (through
xc_exchange_page()) tools. When used is long-running apps (e.g. in xl)
domains become zombies after their death.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
XEN_DOMCTL_cacheflush hypercalls are (and will always be) -ENOSYS on x86, but
xc_domain_cacheflush() is called often during domain build and migrate for
correct behaviour on ARM.
Stub xc_domain_cacheflush() out on x86 to remove its pressure on the global
domctl lock, and the hypercall overhead (which applies further pressure to the
already heavily-contended TLB flush lock).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Keir Fraser <keir@xen.org>
CC: Jan Beulich <JBeulich@suse.com>
CC: Tim Deegan <tim@xen.org>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
With the introduction of the XEN_DOMCTL_setvnumainfo
in patch titled: "xen: vnuma topology and subop hypercalls"
we put in the plumbing here to use from the toolstack. The user
is allowed to call this multiple times if they wish so.
It will error out if the nr_vnodes or nr_vcpus is zero.
Signed-off-by: Elena Ufimtseva <ufimtseva@gmail.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
HVMOP_get_param and HVMOP_set_param take a uint32_t for the parameter
index and a uint64_t for the value. So add xc_hvm_param_get() and
xc_hvm_param_set() that take the same types.
The existing xc_get_hvm_param() and xc_set_hvm_param() are retained
for compatibility but are deprecated.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- dropped one hunk against xen-access.c which didn't apply due to
intervening changes ]
by using the flag and the new cpumap arguments introduced in
the parameters of the DOMCTL_{get,set}_vcpuaffinity hypercalls.
Now, both xc_vcpu_setaffinity() and xc_vcpu_getaffinity() have
a new flag parameter, to specify whether the user wants to
set/get hard affinity, soft affinity or both. They also have
two cpumap parameters instead of only one. This way, it is
possible to set/get both hard and soft affinity at the same
time (and, in case of set, each one to its own value).
In xc_vcpu_setaffinity(), the cpumaps are IN/OUT parameters,
as it is for the corresponding arguments of the
DOMCTL_set_vcpuaffinity hypercall. What Xen puts there is the
hard and soft effective affinity, that is what Xen will actually
use for scheduling.
In-tree callers are also fixed to cope with the new interface.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
c/s 568da4f8 "pt-irq fixes and improvements" accidentally forgot a break when
refactoring xc_domain_bind_pt_irq() which results in bind->u.pci.bus being
clobbered by isa_irq for PCI and MSI_TRANSLATE interrupts.
Coverity-ID: 1223210
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Jan Beulich <JBeulich@suse.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Also refactor the contents of xc_pfn_to_mfn(). It is functionally identical,
but contains less lisp, fewer magic numbers, and more description of why 32bit
guests are treated differently.
Note that this does not affect pfn_to_mfn() in xc_domain_save.c That was
already a macro which aliased pfn_to_mfn() in xg_private.h but without
actually using it.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
by adding a flag for the caller to specify which one he cares about.
At the same time, enable the caller to get back the "effective affinity"
of the vCPU. That is the intersection between cpupool's cpus, the (new)
hard affinity and, for soft affinity, the (new) soft affinity. In fact,
despite what has been successfully set with the DOMCTL_setvcpuaffinity
hypercall, the Xen scheduler will never run a vCPU outside of its hard
affinity or of its domain's cpupool.
This happens by adding another cpumap to the interface and making both
the cpumaps IN/OUT parameters (for DOMCTL_setvcpuaffinity, they're of
course out-only for DOMCTL_getvcpuaffinity).
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Tools side:
- don't silently ignore unrecognized PT_IRQ_TYPE_* values
- respect that the interface type contains a union, making the code at
once no longer depend on the hypervisor ignoring the bus field of the
PCI portion of the interface structure)
Hypervisor side:
- don't ignore the PCI bus number passed in
- don't store values (gsi, link) calculated from other stored values
- avoid calling xfree() with a spin lock held where easily possible
- have pt_irq_destroy_bind() respect the passed in type
- scope reduction and constification of various variables
- use switch instead of if/else-if chains
- formatting
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Yang Zhang <yang.z.zhang@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Some emulators will only register regions that require non-buffered
access. (In practice the only region that a guest uses buffered access
for today is the VGA aperture from 0xa0000-0xbffff). This patch therefore
makes allocation of the buffered ioreq page and event channel optional for
secondary ioreq servers.
If a guest attempts buffered access to an ioreq server that does not
support it, the access will be handled via the normal synchronous path.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Tamas K Lengyel
Paul Durrant
Andrew Cooper
Konrad Rzeszutek Wilk
Jan Beulich
Shuai Ruan
Ian Campbell
Juergen Gross
Roger Pau Monne
Wei Liu
Vitaly Kuznetsov
Boris Ostrovsky
Julien Grall
Tiejun Chen
Julien Grall
Elena Ufimtseva
Arianna Avanzini
David Vrabel
Dario Faggioli