Exit with 0 for success.
Exit with 1 for an error.
Exit with 2 if the operation should be retried for any reason (e.g. a
timeout or because another operation was in progress).
This allows a program or script driving xen-livepatch to determine if
the operation should be retried without parsing the output.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
The default timeout in the hypervisor for a livepatch operation is 30 ms,
but xen-livepatch currently waits for up to 30 seconds for the operation
to complete. Instead, remove the retry loop and simply wait for 2 * 30 ms
for the operation to complete. The extra period is to account for the
time to actually start the operation.
Furthermore, have xen-livepatch set the hypervisor timeout rather than
relying on the hypervisor default since the tool doesn't know how long
it will be. Use nanosleep rather than usleep since usleep has been
removed from POSIX.1-2008.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Improving the output of xen-livepatch, which is currently hard to read,
especially when an error occurs.
Some examples of the changes:
Before:
$ xen-livepatch apply test
Performing apply:. completed
After:
$ xen-livepatch apply test
Applying test:. completed
Before:
$ xen-livepatch apply test2
test2 failed with 22(Invalid argument)
Performing apply: (no newline)
After:
$ xen-livepatch apply test2
Applying test2: failed
Error 22: Invalid argument
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Using both stdout and stderr interleaved without newlines can result in
strange output when using line buffered mode (e.g. a terminal) or when
fully buffered (e.g. redirected to a file). Set stdout to unbuffered mode
to fix this (stderr is always unbuffered by default).
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Somewhat confusingly, before the action has been executed the patch is
expected to be in the "allow" state, not the "expected" state. The
check for this was correct but the subsequent error message was not.
Fix the error message to show this state correctly.
Before:
$ xen-livepatch unload test
test: in wrong state (APPLIED), expected (unknown)
After:
$ xen-livepatch unload test
test: in wrong state (APPLIED), expected (CHECKED)
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Provide two tools: a small C program to extract data from hypervisor and
a python script to split data into multiple files.
The file xencov.c is salvaged and modified from the original xencov.c.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The internal data structure and code are tied to an old gcov format.
It's easier to just redo everything from scratch.
Salvage the reusable parts: leave xen/common/gcov and an empty Makefile
there, leave gcov support in Kconfig but mark that as broken. Also
reserve the sysctl number for later use (but delete relevant sysctl
structures).
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add two new AVX512 subfeatures support for guest.
AVX512_4VNNIW:
Vector instructions for deep learning enhanced word variable precision.
AVX512_4FMAPS:
Vector instructions for deep learning floating-point single precision.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: He Chen <he.chen@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
That way we can print out the header if we are sure the
hypervisor has been compiled with Xen Livepatching.
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
There has not been any substantial update to them since 2011. My quick
check shows that they don't work.
Just delete them. It would be easy to resurrect them from git log should
people still need them.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Initialise j to 0 to make some versions of gcc (e.g., gcc4.5/4.3) happy to
avoid compilation error by commit beba3693f7.
Failure manifests with gcc 4.5 as:
[ 153s] cc1: warnings being treated as errors
[ 153s] xen-livepatch.c: In function 'main':
[ 153s] xen-livepatch.c:415:12: error: 'j' may be used uninitialized in this function
[ 153s] make[3]: *** [xen-livepatch.o] Error 1
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Local variable "j" would be used only when "i == ARRAY_SIZE(main_options)"
is true. Thus, it is not necessary to update "j" when "i ==
ARRAY_SIZE(main_options)" is false.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Specifically:
s/\.xsplice/\.livepatch/
s/XSPLICE/LIVEPATCH/
s/xsplice/livepatch/
s/livepatch_patch_func/livepatch_func/
s/xSplice/Xen Live Patch/
s/livepatching/livepatch/
s/arch_livepatch_enter/arch_livepatch_quiesce/
s/arch_livepatch_exit/arch_livepatch_revive/
And then modify some of the function arguments
to have two more characters.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
A simple tool that allows an system admin to perform
basic xsplice operations:
- Upload a xsplice file (with an unique name)
- List all the xsplice payloads loaded.
- Apply, revert, replace, or unload the payload using the
unique name.
- Do all two - upload, and apply the payload in one go (load).
Also will use the name of the file as the <name>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
It is able to reports the current featuresets; both the static masks and
dynamic featuresets from Xen, or to decode an arbitrary featureset into
`/proc/cpuinfo` style strings.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Commit 78c5f59e "x86/hvm/viridian: save APIC assist vector" changed
the name of a field in the viridian vcpu save record. Unfortunately this
record has a decode function in xen-hvmctx and so it no longer builds.
This patch fixes the field name in xen-hvmctx and also adds a decode of
the additional field that was added to the save record.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
After "Drop unused functions do_cstate and single_cstate helper" make
all the remaining functions and global data static and in the process
allow the compiler to notice that cond_rec_init() is also unused, thus
remove it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
These have always been dead code since the code was added AFAICT.
This eliminates the code containing CID 10567079, 10567080, 10567081
and 10567082 (all apparently some confusion between max_cx_num vs
MAX_CX_NR, but given the lack of callers its hard to tell what was
intended)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxenforeignmemory will provide a stable API and ABI for mapping
foreign domain memory (subject to appropriate privileges).
The new library exposes an interface equivalent to
xc_map_foreign_memory_bulk, which all the other
xc_map_foreign_memory_* functions (which remain in libxc) are
implemented in terms of.
Upon request (via #define XC_WANT_COMPAT_MAP_FOREIGN_API) libxenctrl
will provide a compat API for the old names. This is used by qemu-xen
and qemu-trad as well as various in tree things (which required
de-dupping various #includes in some too to get the #define before the
first).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
libxencall will provide a stable API and ABI for calling hypercalls
(although those hypercalls themselves may not have a stable API). As
well as the hypercall buffer infrastructure needed in order to safely
provide pointer arguments to hypercalls.
libxenctrl encapsulates a instance of this interface, so users of that
library are not currently subjected to any actual changes. However all
hypercalls made internally by libxc now use the correct interface. It
is expected that most users of this library will be other libraries
providing a higher level interface, rather than applications directly.
Only the basic functionality to allocate hypercall safe memory is
moved, the type safe stuff and bounce buffers remain in libxc.
Note that the functionality to map foreign pages using privcmd is not
yet moved, meaning that an xc_interface will now contain two open
privcmd file descriptors. Foreign memory mapping is logically separate
functionality and will be moved into its own library.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
libxenevtchn will provide a stable API and ABI for accessing the
evtchn device.
The functions are moved into the xenevtchn namespace to make a clean
break from libxc and avoid ambiguity regarding which interfaces are
stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_EVTCHN_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few event channel related functions which go via privcmd
(EVTCHNOP) rather than ioctls on the /dev/xen/evtchn device in
libxenctrl. Specifically:
- xc_evtchn_alloc_unbound
- xc_evtchn_reset
- xc_evtchn_status
Note that xc_evtchn_alloc_unbound's functionality is also provided by
xenevtchn_bind_unbound_port() (née xc_evtchn_bind_unbound_port) and is
probably redundant.
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels. QEMU does use these in hw/xenpv/xen_domainbuild.c but
that is a "toolstack use".
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
The average is calculated over the period of time from the last
xenpm report of the average CPU frequency.
Reporting the average CPU frequency helps confirm the level of turbo
boost being achieved per CPU.
Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Instead switch to an explicit -include $(XEN_ROOT)/tools/config.h to
pickup config.h.
Most places already do this, fixup the rest.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
binutils 2.22 changed ld default from --copy-dt-needed-entries
to -no-copy-dt-needed-entries. This revealed that some objects
are linked implicitly with libtinfo and newer ld fails to build
relevant executables.
Below is short explanation why we should not do that...
http://fedoraproject.org/wiki/UnderstandingDSOLinkChange says:
The default behaviour for ld (my note: before version 2.22) allows
users to 'indirectly' link to required objects/libraries through
intermediate objects/libraries. While this is convenient, it can
also be dangerous because it makes your program's dependencies tied
to the dependencies of other objects. If those objects ever change
their linkages, they can break your program without any changes
to your own code!
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 250f0b43af ("libxl/libxc: Move libxl_get_cpu_topology()'s
hypercall buffer management to libxc") broke non-debug compilation:
on error path we may have uninitialized cputopo pointer.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reported-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xc_cputopoinfo() is not expected to be used on a hot path and therefore
hypercall buffer management can be pushed into libxc. This will simplify
life for callers.
Also update error reporting macros.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
An increasing version and/or release number helps to update existing
packages without --force as in "rpm Uvh --force xen.rpm". Instead its
possible to do "rpm -Fvh *.rpm" to update only already installed
packages.
The usage of --force disables essentials checks such as file conflict
detection. As a result the new xen.rpm may overwrite files owned by
other packages.
With the current way of calculating version-release it is difficult to
get an increasing release number into the spec file. The release is
always zero unless "make make XEN_VENDORVERSION=`date +.%s`" is used,
which has the bad side effect that xen.gz always gets a different
filename every time.
Update mkrpm to recognize PKG_RELEASE=. Its value will be appended to
the Release string. It can be filled with a time stamp, like:
make rpmball PKG_RELEASE="`date +%Y%m%d%H%M%S`"
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Tested-by: George Dunlap <george.dunlap@eu.citrix.com>
A number of changes to XEN_SYSCTL_topologyinfo interface:
* Instead of copying data for each field in xen_sysctl_topologyinfo separately
put cpu/socket/node into a single structure and do a single copy for each
processor.
* A NULL cputopo handle passed is a request for maximum number of CPUs
(num_cpus). If cputopo is valid and num_cpus is smaller than the number of
CPUs in the system then -ENOBUFS is returned (and correct num_cpus is provided)
* Do not use max_cpu_index, which is almost always used for calculating number
CPUs (thus requiring adding or subtracting one), replace it with num_cpus.
* There is no need to copy whole op in sysctl to user at the end, we only need
num_cpus.
* Rename xen_sysctl_topologyinfo and XEN_SYSCTL_topologyinfo to reflect the fact
that these are used for CPU topology. Subsequent patch will add support for
PCI topology sysctl.
* Replace INVALID_TOPOLOGY_ID with "XEN_"-prefixed macros for each invalid type
(core, socket, node).
Update sysctl version to 0x0000000C
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Instead of assuming everything is always OK. As such
we return now the return value (or zero for success).
The max_mfn is now passed in as the parameter.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Instead of returning -Exx we now return -1 for error.
We could stash the -Exx values in errno values but why - the
underlaying functions we call all stash the proper errno
value. Hence we just propagate it up wherver it is needed.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Provide mini-os url and revision in Config.mk
Make stubdom targets depend on mini-os-dir target. Make
subtree-force-update{,-all} depend on mini-os-dir-force-update.
Also make mktarball script generate mini-os archive.
Original mini-os directory is renamed to mini-os-intree to help reduce
patch length. That directory will be deleted in a separate patch.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
---
Changes in v3:
1. Put mini-os targets in main Makefile.
2. Stubdom clean and distclean don't depend on mini-os-dir.
Changes in v2:
1. Use hash in Config.mk.
Coverity uses several heuristics to identify when one case statement
legitimately falls through into the next, and a comment as the final item in a
case statement is one heuristic (the assumption being that it is a
justification for the fallthrough).
Use this to perform an audit of defects and hide the legitimate fallthroughs.
There are two bugfixes identified in the audit, both minor:
* 'n' command line handling for gtracestat
* BKSPC handling in xentop
All other identified defaults are legitimate fallthoughs
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Coverity-IDs: 1055464, 1055465, 1055467, 1055468, 1055481, 1055482
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Xen Coverity Team <coverity@xen.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The existing makefile was awkward with needing to express conditional
inclusion for both the build and install rules, and contained both split and
unsplit long lines.
The INSTALL_* rules now contain the conditional inclusion information, while
the TARGET_* rules generate the build list from the complete install list,
less the minority of scripts which simply need copying into place. Comments
are introduces to aid clarity.
In addition, collect the CFLAGS expressions, remove the unreferenced and empty
HDRS list, and restrict the libxc internals build fix to the offending
binaries.
No functional change as a result of this patch, but it is rather more simple
to add or remove utilities.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
He Chen
Ross Lagerwall
Wei Liu
Konrad Rzeszutek Wilk
Dongli Zhang
Roger Pau Monne
Andrew Cooper
Paul Durrant
Ian Campbell
Malcolm Crossley
Daniel Kiper
Olaf Hering
Boris Ostrovsky