For Credit2, in both the trace records, inside Xen,
and in their parsing, in xenalyze.
In fact, as it is quite a bit better, in order to
understand how much negative credits have gone for
a certain vCPU, to see an actual negative number,
as compared to a wrapped around unsigned!
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
There are some scheduling related trace records that
are not being taken care of (and hence only dumped as
raw records).
Some of them are being introduced in this series, while
other were just neglected by previous patches.
Add support for them.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Right now, two out of the three events related to
context switch (that is TRC_SCHED_SWITCH_INFPREV and
TRC_SCHED_SWITCH_INFNEXT) only report the domain id,
and not the vcpu id.
That's omitting a useful piece of information, and
even if we be figured that out by looking at other
records, that's unnecessarily complicated (especially
if working on a trace from a sctipt).
This changes both the tracing code in Xen and the parsing
code in tools at once, to avoid introducing transitional
regressions.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
This is a side-effect of commit c36e1c, which currently prevents compiling
xenalyze with libcs that don't have argp built-in.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Rather than have large fixed-size buffers, start with smaller buffers
and allow them to grow as needed (doubling each time), with a fairly
large maximum. Allow this maximum to be set by a command-line
parameter.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The only difference between event_cycle_summary and cycle_summary was
that the former has a separate counter for "events" which had
zero-cycle events. But a lot of the code dealing with them had to be
duplicated with slightly different fields.
Remove event_cycle_summary, add an "event_count" field to
cycle_symmary, and use cycle_summary for everything.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
At the moment these structures are not used, and half of the code for
collecting it is commented out. To be used they require further
support for collecting hardware instruction counter data inside of
Xen.
Remove the code entirely; when they're wanted again they will be here
in the git log.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
xenalyze was inheriting LDLIBS of xentrace; but it doesn't need them.
Remove this dependency, which allows xenalyze to be built without the libraries
having been built, and run without the libraries being installed.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
In fact, 52cf096df7 ("xenalyze: handle scheduling event"),
when dealing with TRC_SCHED_SWITCH, forgot to check whether
we actually are in dump mode, causing the printf() in
dump_sched_switch() to always produce its output, which
is not what we want.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
more specifically, with: TICKLE_NEW, RUNQ_MAX_WEIGHT,
MIGRATE, LOAD_CHECK, LOAD_BALANCE and PICKED_CPU, and
in both both xenalyze and formats (for xentrace_format).
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add the shift used for the precision of the integer
arithmetic to the trace records, and update both xenalyze
and xentrace_format to make use of/print it.
In particular, in xenalyze, we are can now show the
load as a (easier to interpreet) percentage.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(i.e., domain creation and destruction) so the
trace will show properly decoded info, rather
than just a bunch of hex codes.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
We change the xen_version libxc code to use the new hypercall.
Which of course means every user in the code base has to
be changed over.
It is important to note that the xc_version_op has a different
return semantic than the previous one. It returns negative
values on error (like the old one), but it also returns
an positive value on success (unlike the old one). The positive
value is the number of bytes copied in.
Note that both Ocaml and xenstat use tabs instead of four
spaces so they look quite odd.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com> [for the Ocaml stubs]
Acked-by: George Dunlap <george.dunlap@eu.citrix.com> [xenctx bits]
Acked-by: Wei Liu <wei.liu2@citrix.com>
to include the vcpu IDs, in a way that matches
how the "dom:vcpu" couple is displayed in other
events (runstate changes).
Also add the trace for TRC_SCHED_SHUTDOWN_CODE which
was missing and was done via SCHEDOP_shutdown_code hypercall.
(TRC_SCHED_SHUTDOWN trace was present).
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Olaf Hering <olaf@aepfle.de>
---
Changes from v1:
* enhanced changelog, as suggested during review.
find_vec() is supposed to find the vector in the list if it exists,
choose an empty slot if it doesn't exist, and return null if all slots
are full.
However, coverity noticed that although the callers of find_vec() handle
the last condition, find_vec() itself didn't.
Check to see if we actually found an empty slot before attempting to
initialize it.
CID 1306864
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Coverity notices that if !head is true, that !N can never be true.
Don't bother checking N, since we know it has to be at least one.
CID 1354243
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
1) EXIT_REASON_EXCEPTION_NMI is 0, and Clang complains:
xenalyze.c:513:33: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
[EXIT_REASON_EXCEPTION_NMI]="EXCEPTION_NMI",
^~~~~~~~~~~~~~~
xenalyze.c:512:11: note: previous initialization is here
[0] = "NONE",
^~~~~~
2) cr3_time_compare(), eip_compare(), ipi_send() and cr3_compare_start() are
declared as nested functions, which is a GCCism not supported by Clang.
As they don't actually make use of the interesting feature offered by
nested functions (i.e. dynamic scoping), move them to just being normal
functions.
3) clear_interval_summary(), update_cpi() and clear_interval_cpi() are all
unused. The former isn't reference anywhere, so is deleted, while the other
two are called from currently #if 0'd code.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
gcc-6 complains:
xenalyze.c:4132:9: error: 'cr3_compare_total' defined but not used [-Werror=unused-function]
int cr3_compare_total(const void *_a, const void *_b) {
^~~~~~~~~~~~~~~~~
I believe it is correct.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
gcc-6 adds -Wmisleading-indentation which found these issues.
xenalyze.c: In function 'weighted_percentile':
xenalyze.c:2136:18: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
L=I; L_weight = I_weight;
^~~~~~~~
xenalyze.c:2135:9: note: ...this 'if' clause, but it is not
if(J_weight<K_weight)
^~
xenalyze.c:2138:18: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
R=J; R_weight = J_weight;
^~~~~~~~
xenalyze.c:2137:9: note: ...this 'if' clause, but it is not
if(K_weight<I_weight)
^~
xenalyze.c: In function 'self_weighted_percentile':
xenalyze.c:2215:18: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
L=I; L_weight = I_weight;
^~~~~~~~
xenalyze.c:2214:9: note: ...this 'if' clause, but it is not
if(J_weight<K_weight)
^~
xenalyze.c:2217:18: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
R=J; R_weight = J_weight;
^~~~~~~~
xenalyze.c:2216:9: note: ...this 'if' clause, but it is not
if(K_weight<I_weight)
^~
I've modified according to what I think the intention is, i.e. added braces
rather than moving the line in question out a level.
I have only build tested the result.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
libxenforeignmemory will provide a stable API and ABI for mapping
foreign domain memory (subject to appropriate privileges).
The new library exposes an interface equivalent to
xc_map_foreign_memory_bulk, which all the other
xc_map_foreign_memory_* functions (which remain in libxc) are
implemented in terms of.
Upon request (via #define XC_WANT_COMPAT_MAP_FOREIGN_API) libxenctrl
will provide a compat API for the old names. This is used by qemu-xen
and qemu-trad as well as various in tree things (which required
de-dupping various #includes in some too to get the #define before the
first).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
It can trivially be replaced by xc_map_foreign_pages which is the
interface I want to move to going forward (by standardising on _bulk
but handling err=NULL as _pages does).
The callers of _batch are checking a mixture of a NULL return or
looking to see if the top nibble of the (usually sole) mfn they pass
has been modified to be non-zero to detect errors. _pages never
modifies the mfn it was given (it's const) and returns NULL on
failure, so adjust the error handling where necessary. Some callers
use a copy of the mfn array, for reuse on failure with _batch, which
is no longer necessary as _pages doesn't modify the array, however I
haven't cleaned that up here.
This reduces the twist maze of xc_map_foreign_* by one, which will be
useful when trying to come up with an underlying stable interface.
NetBSD and Solaris implemented xc_map_foreign_bulk in terms of
xc_map_foreign_batch via a compat layer, so xc_map_foreign_batch
becomes an internal osdep for them.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
libxenevtchn will provide a stable API and ABI for accessing the
evtchn device.
The functions are moved into the xenevtchn namespace to make a clean
break from libxc and avoid ambiguity regarding which interfaces are
stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_EVTCHN_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few event channel related functions which go via privcmd
(EVTCHNOP) rather than ioctls on the /dev/xen/evtchn device in
libxenctrl. Specifically:
- xc_evtchn_alloc_unbound
- xc_evtchn_reset
- xc_evtchn_status
Note that xc_evtchn_alloc_unbound's functionality is also provided by
xenevtchn_bind_unbound_port() (née xc_evtchn_bind_unbound_port) and is
probably redundant.
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels. QEMU does use these in hw/xenpv/xen_domainbuild.c but
that is a "toolstack use".
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
And transform to POD to match our other manpages.
The content is identical, although the formatting was altered slightly
to conform to more usual manpage layout.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
And transform to POD to match our other manpages.
The content is identical (other than one correction), although the
layout differs slightly with certain indentation.
As a correction, remove the reference to xentrace_cpusplit(1) which was
removed in c/s 9b9ca98b6a, more than 10 years ago!
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
This merges xenalyze.hg, changeset 150:24308507be1d,
into tools/xentrace/xenalyze.c to have the tool and
public/trace.h in one place.
Adjust code to use public/trace.h instead of private trace.h
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- wrap $(BIN) install in a check in case it is empty (which it
is on !x86, avoid BIN += since it results in BIN = ' ' on
!x86 ]
Instead of just using -c 0x<some hex value> we can
also use: -c <starting cpu>-<end cpu>, -c <cpu1>,<cpu2>, or a
combination of them, or 'all' for all cpus.
This new format can include just singular CPUs: -c <cpu1>,
or ranges without an start or end (and xentrace will figure out
the values), such as: -c -<cpu2> (which will include cpu0, cpu1,
and cpu2) or -c <cpu2>- (which will include cpu2 and up to MAX_CPUS).
That should make it easier to trace the right CPU if
using this along with 'xl vcpu-list'.
The code has been lifted from the Linux kernel, see file
lib/bitmap.c, function __bitmap_parselist.
To make the old behavior and the new function work, we check
to see if the arguments have '0x' in them. If they do
we use the old style parsing (limited to 32 CPUs). If that
does not exist we use the new parsing.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
xentrace is the only caller at the moment. Split the cpu and event
mask setting out into seperate functions, but leave the current limit
of 32 bits for masks passed in from the command-line.
Based on a patch from Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Dario Faggioli
Roger Pau Monne
George Dunlap
Konrad Rzeszutek Wilk
George Dunlap
Andrew Cooper
Ian Campbell
Olaf Hering
Don Slutz