install-hotplug and install-udev are obsolete since commit 57bcfa11
("tools/hotplug: Separate OS-specific scripts.")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Create XEN_LOCK_DIR because it is a compiletime setting. Also /var/lock
might be empty on startup because it is a tmpfs mount point.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Create XEN_RUN_DIR instead of hardcoded path because it is a compiletime
setting. Also /var/run might be empty on startup because it is a tmpfs
mount point.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Move location of temporary bootfiles from /var/run/xend/boot to
/var/run/xen/pygrub. Create the subdirectory if does not exist.
The <dir> argument --output-directory must be an existing directory.
The reason for this change is that all entrys below /var/run have to be
created at runtime in case /var/run is cleared on every boot.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The directory tools/python/xen/util does not exist.
Upcoming changes to genpath will fail if the rule persists.
Nothing uses path.py (anymore?), so get rid it.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- removed from .gitignore too ]
Even if xen is configured and compiled with different --prefix= so that
it operates entirely below $prefix, the resulting package from 'make
rpmball' is always called "xen.rpm".
Use an environment name to give a different name.
This can be used like this:
suffix=-bugN
prefix=/opx/xen/staging${suffix}
./configure --prefix=${prefix}
make rpmball PKG_SUFFIX=${suffix}
The result will be "xen-bugN.rpm" instead of "xen.rpm". The benefit is that
many xen${suffix}.rpm packages can be installed at the same time.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In verify mode, we map the guest memory, and the guest page is
region_base + i * PAGE_SIZE. So we should csum page (region_base
+ i * PAGE_SIZE), not (region_base + (i+curbatch) * PAGE_SIZE)
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
apply_batch() only handles MAX_BATCH_SIZE pages at one time. If
there is some bogus/unmapped/allocate-only/broken page, we will
skip it. So when we call apply_batch() again, the first page's
index is curbatch - invalid_pages. invalid_pages stores the number
of bogus/unmapped/allocate-only/broken pages we have found.
In many cases, invalid_pages is 0, so we don't catch this error.
Signed-off-by: Hong Tao <bobby.hong@huawei.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Vmx_disable_intercept_for_msr() will now refuse to disable interception of
MSRs needed for memory introspection. It is not possible to gate this on
mem_access being active for the domain, since by the time mem_access does
become active the interception for the interesting MSRs has already been
disabled (vmx_disable_intercept_for_msr() runs very early on).
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Tim Deegan <tim@xen.org>
As we've already generated a JSON config for Dom0, print that out when
requested.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Before this change, xl stores domain configuration in "xl" format, which
is in fact a verbatim copy of user supplied domain config.
Now libxl provides a new API to retrieve domain configuration, switch to
that new API, store configuration in JSON format.
Tests done so far (xl.{new,old} denotes xl with{,out} "libxl-json"
support):
1. xl.new create then xl.new save, hexdump saved file: domain config
saved in JSON format
2. xl.new create, xl.new save then xl.old restore: failed on
mandatory flag check
3. xl.new create, xl.new save then xl.new restore: succeeded
4. xl.old create, xl.old save then xl.new restore: succeeded
5. xl.new create then local migrate, receiving end xl.new: succeeded
6. xl.old create then local migrate, receiving end xl.new: succeeded
Note that "xl" config is still supported and handled when restarting a
domain. "xl" config file takes precedence over "libxl-json" in that
case, so that user who uses "config-update" to store new config file
won't have regression. All other scenarios (migration, domain listing
etc.) now use the new API.
Lastly, print out warning when users invoke "config-update" to
discourage them from using this command.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This will be used in later patch for xl to remove its "xl" userdata
file.
Both CTX lock and userdata lock are taken in this API. CTX lock is taken
to maintain locking hierarchy, but it also has a side effect to protect
against R-M-W by other threads. Userdata lock is used to protect against
domain destruction.
In general application should not rely on these internal locks to
protect its own userdata files. It should deploys its own lock if it
cares.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Introduce a new public API to return domain configuration. This returned
configuration can be used to rebuild a domain.
Note that this configuration only describes the configuration necessary
to reproduce the guest visible state and does not necessarily include
specific decisions made by the toolstack regarding its current
incarnation (e.g. disk backend) unless they were specified by the
application when the domain was created.
With this approach we can preserve what user has provided in the
original configuration as well as valuable information from xenstore.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Introduce a helper function which can return both "target" node and
"static-max" node of a domain. Reimplement libxl_get_memory_target using
this helper. libxl__fill_dom0_memory_info is adjusted as well.
This helper will be used in later patch.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
We introduce an intermediate empty state when inserting media into
CDROM. The scheme works like this:
lock json config
write empty state to xenstore
for (;;) {
write user supplied disk to JSON
write disk information to xenstore
}
unlock json config
Bear in mind that all steps can fail. With the proposed scheme, we now
know, if xenstore is empty, then CDROM should be considered empty;
otherwise we should use JSON version of CDROM configuration.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
We update JSON version first, then write to xenstore, so that we
maintain the following invariant: any device which is present in
xenstore has a corresponding entry in JSON.
The workflow is as followed:
lock json config
read json config
update in-memory json config with new entry, replacing
any stale entry
for loop
open xs transaction
check device existence, abort if it exists
write in-memory json config to disk
commit xs transaction
end for loop
unlock json config
Please see comment in libxl_internal.h for correctness proof.
As those routines are called both during domain creation and device
hotplug, we add a flag to indicate whether we need to update JSON
config. This flag is only set to true when we hotplug a device. We
cannot update JSON config during domain creation as JSON config is
committed to disk only when domain creation finishes.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The lock introduced in d2cd9d4f ("libxl: functions to lock / unlock
libxl userdata store") has a bug that can leak the lock file when domain
destruction races with other functions that try to get hold of the lock.
There are several issues:
1. The lock is released too early with libxl__userdata_destroyall
deletes everything in userdata store, including the lock file.
2. The check of domain existence is only done at the beginning of lock
function, by the time the lock is acquired, the domain might have
been gone already.
The effect of this two issues is we can run into such situation:
Process 1 Process 2 domain destruction
# LOCK FUNCTION # LOCK FUNCTION
check domain existence check domain existence
acquire lock (file created)
# LOCK FUNCTION
destroy all files (lock file deleted,
lock released)
acquire lock (file created)
# LOCK FUNCTION destroy domain
# UNLOCK (close fd only)
[ lock file leaked ]
Fix this problem by deploying following changes:
1. Unlink lock file in unlock function.
2. Modify libxl__userdata_destroyall to not delete domain-userdata-lock,
so that the lock remains held until unlock function is called.
3. Check domain still exists when the lock is acquired, unlock if
domain is already gone.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
* Since there would not be 32-bit hypervisor, we do not need
hypervisor_is_64bit() again.
* Remove xen_64bit from xc_cpuid_pv_policy().
* Move conditionals for LM/NX masking into architectural logic.
* Since RDTSCP could be used for both 64-bit and 32-bit architectures,
we do not need the tying to 64-bit in intel_xc_cpuid_policy().
* vmx_cpuid_intercept() has covered SYSCALL masking when vmexit and
original is_64bit or is_pae could not cover whether guest OS is really
in long mode or not. Here to drop the conditionals and leave it to
vmexit handler to do the real work.
Signed-off-by: Zhuo Song <songzhuo.sz@alibaba-inc.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
[ ijc -- inserted missing ) to fix compile error ]
This fixes a bug where if a client shares more than 1 page, the
munmap call fails to clean up everything. A process which does
a lot of sharing and unsharing can run out of resources.
This patch also fixes in-tree callers of
- xc_gntshr_munmap
- xc_gnttab_munmap
to supply page counts rather than lengths.
Signed-off-by: David Scott <dave.scott@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This commit changes the existing libxl code to be sure to grant access
permission to PCI-related I/O memory ranges, while setting up passthrough
of PCI devices specified in the domain's configuration, and to VGA-related
memory ranges, while setting up VGA passthrough (if gfx_passthru = 1 in
the domain's configuration).
As for the latter, the newly-added code does not replace any existing one,
but instead matches the calls to xc_domain_memory_mapping() performed by
QEMU on the path that is executed if gfx passthru is enabled and follows
the registration of a new VGA controller (in register_vga_regions(),
defined in hw/pt-graphics.c). In fact, VGA needs some extra memory
ranges to be mapped with respect to PCI; QEMU expects that access to those
memory ranges is implicitly granted when he calls the hypervisor with the
function xc_domain_memory_mapping(): this commit calls iomem_permission
for it when needed by checking the passthru PCI device's class.
NOTE: the code added by this commit still does not verify if the passthru
of the framebuffer area is being performed for the primary GPU, but
only replicates the behavior of QEMU which is limited to performing
the passthru for all PCI devices of VGA class.
This commit is instrumental to the last one in the series, which will
separate the functions of the iomem_permission and memory_mapping DOMCTLs,
so that requesting an I/O-memory range will not imply that access to such
a range is implicitly granted.
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
Acked-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Paolo Valente <paolo.valente@unimore.it>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Julien Grall <julien.grall@citrix.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Eric Trudeau <etrudeau@broadcom.com>
Cc: Viktor Kleinik <viktor.kleinik@globallogic.com>
Cc: Andrii Tseglytskyi <andrii.tseglytskyi@globallogic.com>
This small helper is responsible for generating Dom0 JSON config
stub and writing Dom0 xenstore entries. This helpers subsumes two calls
to xenstore-write in xencommons script.
Dom0 UUID is intentionally left untouched, so it is always all
zeros. This makes sure that we don't leak Dom0 stubs across rebooting.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- folded in incremental patch for *BSD ]
Originally the code allowed users to attach the same device more than
once. It just stupidly overwrites xenstore entries. This is bogus as
frontend will be very confused.
Introduce a helper function to check if the device to be written to
xenstore already exists. A new error code is also introduced.
The check and add are within one xs transaction.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The configuration is stored in libxl-json format. It will be used as
template to reconstruct domain configuration during runtime.
There's only one write to disk when domain creation finishes. We
therefore have a window that the domain exists but has no JSON config in
disk. We define this state as domain being created or destroyed. Any
other operations that need to access JSON config should bail.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Introduce a new format in libxl userdata store called "libxl-json". This
file format contains JSON version of libxl_domain_config, generated by
libxl. Applications are not supposed to access this file directly.
Two internal functions to get and set libxl_domain_configuration
are also introduced. Also introduce a new error code to indicate
abnormal state that libxl-json config file is empty.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Originally libxl user data store didn't have lock at all. There could be
such race condition as mentioned by Ian Jackson:
Task 1 Task 2
Creating the domain Trying to shut down
actually create domain
observe domid
start domain destruction
delete all userdata
destroy domain
store the userdata
*** forbidden state created: userdata exists but domain doesn't
*** userdata has been leaked
[ would now bomb out ]
This patch adds in proper locking to libxl user data store. The lock is
associated with a specific domain (i.e. a per-domain lock).
As for locking hierachy, we first take CTX lock (which is implemented
with pthread recursive mutex so even if the application has taken it
we're fine), then take the file lock. These locks are released in
reversed order.
A new libxl error code ERROR_LOCK_FAIL is introduced to describe failure
to acquire locks.
Also factor out libxl__userdata_{retrieve,store}, so that other
functions that already hold the lock can call them to manipulate
user data.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This lock is used to protect all userdata files related to a particular
domain, which include but are not limited to domain configuration. A
new "domain-userdata-lock" entry is introduced in libxl registry.
This lock works among different processes and different threads within
the same process.
Locking protocol inspired by Ian Jackson's chiark-utils with-lock-ex. A
file lock is taken with flock(2). If that succeeds that thread fstat the
fd and stat the lock file path. If the device and inode match then the
lock has been successfully acquired. This lock remains acquired until
the lock file gets deleted or released by flock(2). If device and inode
don't match then another thread acquired the lock and deleted the file
in the meantime; lock procedure should restart.
Portability note: this lock utilises flock(2) so a proper implementation
of flock(2) is required -- that is, it should not be implemented with
fcntl(2).
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Autoconf already has appropriate Linux/non-Linux logic for CONFIG_BLKTAP2.
Let LIBXL_BLKTAP inherit directly from CONFIG_BLKTAP2, rather than requiring a
further LIBXL_BLKTAP=n in addition to ./configure --disable-blktap2 to get
libxl to successfully link under Linux.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As it needs to be, considering that we assign -1 to it (and
that, later, we check for it to be -1), to signify 'all vcpus'.
While at it, fix a coding style nit and improve error reporting.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Don Slutz <dslutz@verizon.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
OCaml is replacing its own uint32 type with the ISO C99 uint32_t type
in 4.03.0+dev. Ths patch replaces the remaining uses of uint32 with
uint32_t in the ocaml C code for xen.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Acked-by: David Scott <dave.scott@citrix.com>
With the introduction of the XEN_DOMCTL_setvnumainfo
in patch titled: "xen: vnuma topology and subop hypercalls"
we put in the plumbing here to use from the toolstack. The user
is allowed to call this multiple times if they wish so.
It will error out if the nr_vnodes or nr_vcpus is zero.
Signed-off-by: Elena Ufimtseva <ufimtseva@gmail.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Define xsm_get_vnumainfo hypercall used for domain which
wish to receive vnuma topology. Add xsm hook for
XEN_DOMCTL_setvnumainfo. Also adds basic policies.
Signed-off-by: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
The commit 11dffa2359 "xen: pass kernel initrd to qemu" deprecated these in
favour of build_info->{kernel,ramdisk,cmdline} but missed a couple of uses.
The ARM case breaks guest boot by omitting the command line from the DTB while
the xl SXP one is mostly cosmetic.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
If max_elem is not zero then hypervisor's spinlock_profile_ucopy_elem()
will attempt to copy profile data into user's data buffer. Since this
buffer is explicitly set to (the equivalent of) NULL the copy will fail,
causing xenlockprof to fail as well.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently in xl.cfg, use 'root' and 'extra' to generate the command
line. 'cmdline' could be a more generic equivalent. So, add 'cmdline'
in xl.cfg and let it be preferred. 'root' and 'extra' still works.
But when 'cmdline' is specified, 'root' and 'extra' will be ignored.
[HVM config example]
[snip]
builder="hvm"
device_model_override="/home/cyliu/git/qemu/x86_64-softmmu/qemu-system-x86_64"
kernel="/mnt/vmlinuz-3.0.13-0.27-default"
ramdisk="/mnt/initrd-3.0.13-0.27-default"
root="/dev/hda2"
extra="console=tty0 console=ttyS0"
[snip]
or:
[snip]
builder="hvm"
device_model_override="/home/cyliu/git/qemu/x86_64-softmmu/qemu-system-x86_64"
kernel="/mnt/vmlinuz-3.0.13-0.27-default"
ramdisk="/mnt/initrd-3.0.13-0.27-default"
cmdline="root=/dev/hda2 console=tty0 console=ttyS0"
[snip]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Olaf Hering
Wen Congyang
Hong Tao
Razvan Cojocaru
Wei Liu
Andrew Cooper
Zhuo Song
David Scott
Arianna Avanzini
Tamas K Lengyel
Dario Faggioli
M A Young
Elena Ufimtseva
Ian Campbell
Boris Ostrovsky
Chunyan Liu