These 3 Kconfig docs were imported from Linux erroneously. They are
GPL-2.0-only in Linux, but have no SPDX tag and were placed in such a way to
be included by the blanket statement saying that all RST files are CC-BY-4.0.
We should not be carrying a shadow copy of these docs. They aren't even wired
into our Sphinx docs, and anyone wanting to refer to Kconfig docs is going to
look at the Linux docs anyway. These, and more docs can be found at:
https://www.kernel.org/doc/html/latest/kbuild/
which also have corrections vs the snapshot we took.
Fixes: f80fe2b34f ("xen: Update Kconfig to Linux v5.4")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
(cherry picked from commit 044503f61c)
Make the command line docs match the actual implementation, and state that the
default behaviour is selected at compile time.
Fixes: 980d6acf15 ("IOMMU: make DMA containment of quarantined devices optional")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
(cherry picked from commit 850382254b)
In commit 9d267c049d ("xen/arm64: Rework the memory layout"),
we decided to require Xen to be loaded below 2 TiB to simplify
the logic to enable the MMU. The limit was decided based on
how known platform boot plus some slack.
We had a recent report that this is not sufficient on the AVA
platform with a old firmware [1]. But the restriction is not
going to change in Xen 4.18. So document the limit clearly
in docs/misc/arm/booting.txt.
[1] https://lore.kernel.org/20231013122658.1270506-3-leo.yan@linaro.org
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
With the addition of per-device quarantine page tables the sink page is now
exclusive for each device, and thus writable. Update the documentation to
reflect the current implementation.
Fixes: 14dd241aad ('IOMMU/x86: use per-device page tables for quarantining')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
The credit scheduler tries as hard as it can to ensure that it always
runs scheduling units with positive credit (PRI_TS_UNDER) before
running those with negative credit (PRI_TS_OVER). If the next
runnable scheduling unit is of priority OVER, it will always run the
load balancer, which will scour the system looking for another
scheduling unit of the UNDER priority.
Unfortunately, as the number of cores on a system has grown, the cost
of the work-stealing algorithm has dramatically increased; a recent
trace on a system with 128 cores showed this taking over 50
microseconds.
Add a parameter, load_balance_ratelimit, to limit the frequency of
load balance operations on a given pcpu. Default this to 1
millisecond.
Invert the load balancing conditional to make it more clear, and line
up more closely with the comment above it.
Overall it might be cleaner to have the last_load_balance checking
happen inside csched_load_balance(), but that would require either
passing both now and spc into the function, or looking them up again;
both of which seemed to be worse than simply checking and setting the
values before calling it.
On a system with a vcpu:pcpu ratio of 2:1, running Windows guests
(which will end up calling YIELD during spinlock contention), this
patch increased performance significantly.
Signed-off-by: George Dunlap <george.dunlap@cloud.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
In the Zen1 microarchitecure, there is one divider in the pipeline which
services uops from both threads. In the case of #DE, the latched result from
the previous DIV to execute will be forwarded speculatively.
This is an interesting covert channel that allows two threads to communicate
without any system calls. In also allows userspace to obtain the result of
the most recent DIV instruction executed (even speculatively) in the core,
which can be from a higher privilege context.
Scrub the result from the divider by executing a non-faulting divide. This
needs performing on the exit-to-guest paths, and ist_exit-to-Xen.
Alternatives in IST context is believed safe now that it's done in NMI
context.
This is XSA-439 / CVE-2023-20588.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Not displaying INFO messages by default on release builds is not
helpful, as messages of that level are relevant for hypervisor
operation. For example messages related to livepatches applied and
reverted are of INFO level.
Custom builds that require less verbose output can adjust it using the
command line, but attempt to provide all relevant information by
default on release builds.
Adjust the loglevel of printks that don't have an associated level to
INFO instead of WARNING, since INFO will now be printed by default on
all builds.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
From the Intel SDM: "Hardware-Controlled Performance States (HWP), which
autonomously selects performance states while utilizing OS supplied
performance guidance hints."
Enable HWP to run in autonomous mode by poking the correct MSRs. HWP is
disabled by default, and cpufreq=hwp enables it.
cpufreq= parsing is expanded to allow cpufreq=hwp;xen. This allows
trying HWP and falling back to xen if not available. Only hwp and xen
are supported for this fallback feature. hdc is a sub-option under hwp
(i.e. cpufreq=hwp,hdc=0) as is verbose.
There is no interface to configure - xen_sysctl_pm_op/xenpm will
be extended to configure in subsequent patches. It will run with the
default values, which should be the default 0x80 (out of 0x0-0xff)
energy/performance preference.
Unscientific powertop measurement of an mostly idle, customized OpenXT
install:
A 10th gen 6-core laptop showed battery discharge drop from ~9.x to
~7.x watts.
A 8th gen 4-core laptop dropped from ~10 to ~9
Power usage depends on many factors, especially display brightness, but
this does show a power saving in balanced mode when CPU utilization is
low.
HWP isn't compatible with an external governor - it doesn't take
explicit frequency requests. Therefore a minimal internal governor,
hwp, is also added as a placeholder.
While adding to the xen-command-line.pandoc entry, un-nest verbose from
minfreq. They are independent.
With cpufreq=hwp,verbose, HWP prints processor capabilities that are not
used by the code, like HW_FEEDBACK. This is done because otherwise
there isn't a convenient way to query the information.
Xen doesn't use the HWP interrupt, so it is disabled like in the Linux
pstate driver.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
On native, synthesise the SRSO bits by probing various hardware properties as
given by AMD.
Extend the IBPB-on-entry mitigations to Zen3/4 CPUs. There is a microcode
prerequisite to make this an effective mitigation.
This is part of XSA-434 / CVE-2023-20569
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Cortex-A77 cores (r0p0, r1p0) could deadlock on a sequence of a
store-exclusive or read of PAR_EL1 and a load with device or non-cacheable
memory attributes.
A workaround is available, but it depends on a firmware counterpart.
The proposed workaround from the errata document is to modify the software
running at EL1 and above to include a DMB SY before and after accessing
PAR_EL1.
In conjunction to the above, the firmware needs to use a specific write
sequence to several IMPLEMENTATION DEFINED registers to have the hardware
insert a DMB SY after all load-exclusive and store-exclusive instructions.
Apply the workaround to Xen where PAR_EL1 is read, implementing an helper
function to do that.
Since Xen can be interrupted by irqs in any moment, add a barrier on
entry/exit when we are running on the affected cores.
A guest without the workaround can deadlock the system, so warn the users
of Xen with the above type of cores to use only trusted guests, by
printing a message on Xen startup.
This is XSA-436 / CVE-2023-34320.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
This option is particularly dubious as Xen does not use Protection Keys, owing
to the sharing of pagetables with PV guests. All this option does is hide PKU
by default from HVM guests, and is therefore redundant with the more generic
cpuid=no-pku.
The variable ought to be in __initdata given it's single user, but deleting it
entirely looks to be a better course of action.
Visibility of PKU to guests should be handled via its vm.cfg file.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Henry Wang <Henry.Wang@arm.com>
In the commit d661611d08 ("docs/markdown: Switch to using pandoc, and
fix underscore escaping"), the documentation suffix was changed from
".markdown" to ".pandoc"; however, the reference was missed to update.
This patch updates the documentation name to xen-command-line.pandoc.
Fixes: d661611d08 ("docs/markdown: Switch to using pandoc, and fix underscore escaping")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Fix the right border of the silicon-errata.txt table
Fixes: 1814a626fb ("xen/arm: Update silicon-errata.txt with the Neovers AT erratum")
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
There are implementations of PL011 that can only handle 32-bit accesses
as oppose to the normal behavior where accesses are 8/16-bit wide. This
is usually advertised by setting a dt property 'reg-io-width' to 4.
Introduce CONFIG_EARLY_UART_PL011_MMIO32 Kconfig option to be able to
enable the use of 32-bit only accessors in PL011 early printk code.
Define macros PL011_{STRH,STRB,LDRH} to distinguish accessors for normal
case from 32-bit MMIO one and use them in arm32/arm64 pl011 early printk
code.
Update documentation accordingly.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Tested-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add saving the maximum values of the different accounting data seen
per domain and (for unprivileged domains) globally, and print those
values via the xenstore-control quota command. Add a sub-command for
resetting the global maximum values seen.
This should help for a decision how to set the related quotas.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Add a command line parameter to allow Dom0 the use of SVE resources,
the command line parameter sve=<integer>, sub argument of dom0=,
controls the feature on this domain and sets the maximum SVE vector
length for Dom0.
Add a new function, parse_signed_integer(), to parse an integer
command line argument.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com> # !arm
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
"0 or 1 ... to indicate whether it is capable or incapable, respectively"
is luckily just swapped words. Making this shorter will
make the reading easier.
Signed-off-by: Yann Dirson <yann.dirson@vates.fr>
Reviewed-by: Juergen Gross <jgross@suse.com>
We currently have "Per Domain Paths" as an empty section, whereas it
looks like "General Paths" was not indended to include all the
following sections.
Signed-off-by: Yann Dirson <yann.dirson@vates.fr>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch introduces an optional TPM 2 interface definition to the ACPI table,
which is to be used as part of a vTPM 2 implementation.
Signed-off-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This patch makes the TPM version, for which the ACPI library probes, configurable.
If acpi_config.tpm_verison is set to 1, it indicates that 1.2 (TCPA) should be probed.
I have also added to hvmloader an option to allow setting this new config, which can
be triggered by setting the platform/tpm_verion xenstore key.
Signed-off-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Obtaining code over an insecure transport is a terrible idea for
blatently obvious reasons. Even for non-executable data, insecure
transports are considered deprecated.
This patch enforces the use of secure transports for all xenbits git
repositories. It was generated with the following shell script:
git ls-files -z |
xargs -0 -- sed -Ei -- 's@(git://xenbits\.xen\.org|http://xenbits\.xen\.org/git-http)/@https://xenbits.xen.org/git-http/@g'
All altered links have been tested and are known to work.
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Slightly change the meaning of the command line
gnttab_max_{maptrack_,}frames: do not use them as upper bounds for the
passed values at domain creation, instead just use them as defaults
in the absence of any provided value.
It's not very useful for the options to be used both as defaults and
as capping values for domain creation inputs. The defaults passed on
the command line are used by dom0 which has a very different grant
requirements than a regular domU. dom0 usually needs a bigger
maptrack array, while domU usually require a bigger number of grant
frames.
The relaxation in the logic for the maximum size of the grant and
maptrack table sizes doesn't change the fact that domain creation
hypercall can cause resource exhausting, so disaggregated setups
should take it into account.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
IRQs can be shared between devices, so using the same label as the PCI
device can create conflicts where the IRQ is labeled with one of the
device labels preventing assignment of the second device to the second
domain. Add the ability to specify an irq label distinct from the PCI
device, so a shared irq label can be specified. The policy would then
be written such that the two domains can each use the shared IRQ type in
addition to their labeled PCI device. That way we can still label most
of the PCI device resources and assign devices in the face of shared
IRQs.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Documentation for credit2_runqueue=all says it should create one queue
for all pCPUs on the host. But since introduction
sched_credit2_max_cpus_runqueue, it actually created separate runqueue
per socket, even if the CPUs count is below
sched_credit2_max_cpus_runqueue.
Adjust the condition to skip syblink check in case of
credit2_runqueue=all.
Fixes: 8e2aa76dc1 ("xen: credit2: limit the max number of CPUs in a runqueue")
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Refer to Intel SDM Rev 70 (Dec 2022), Vol3 17.2.3 "Supervisor Shadow Stack
Token".
Architecturally, an event delivery which starts in CPL<3 and switches shadow
stack will first validate the Supervisor Shadow Stack Token (setting the busy
bit), then pushes CS/LIP/SSP. One example of this is an NMI interrupting Xen.
Some CPUs suffer from an issue called fracturing, whereby a fault/vmexit/etc
between setting the busy bit and completing the event injection renders the
action non-restartable, because when it comes time to restart, the busy bit is
found to be already set.
This is far more easily encountered under virt, yet it is not the fault of the
hypervisor, nor the fault of the guest kernel. The fault lies somewhere
between the architectural specification, and the uarch behaviour.
Intel have allocated CPUID.7[1].ecx[18] CET_SSS to enumerate that supervisor
shadow stacks are safe to use. Because of how Xen lays out its shadow stacks,
fracturing is not expected to be a problem on native.
Detect this case on boot and default to not using shstk if virtualised.
Specifying `cet=shstk` on the command line will override this heuristic and
enable shadow stacks irrespective.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
In docs/misc/xenstore.txt the description of the Xenstore node access
permissions is missing one important aspect, which can be found only
in the code or in the wiki [1]:
The first permission entry is defining the owner of the node via the
domid, and the access rights for all domains NOT having a dedicated
permission entry.
Make that aspect clear in the official documentation.
[1]: https://wiki.xenproject.org/wiki/XenBus#Permissions
Reported-by: Edwin Török <edwin.torok@cloud.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
At the moment, Xen does not support booting gzip compressed uImages.
This is because we are trying to decompress the kernel before probing
the u-boot header. This leads to a failure as the header always appears
at the top of the image (and therefore obscuring the gzip header).
Move the call to kernel_uimage_probe before kernel_decompress and make
the function self-containing by taking the following actions:
- take a pointer to struct bootmodule as a parameter,
- check the comp field of a u-boot header to determine compression type,
- in case of compressed image, call kernel_decompress passing uImage
header size as an offset to gzip header,
- set up zimage.{kernel_addr,len} accordingly,
- return -ENOENT in case of a u-boot header not found to distinguish it
amongst other return values and make it the only case for falling
through to try to probe other image types.
Modify kernel_decompress to take an additional parameter being an offset
to a gzip header from start address. This is needed so that a function
can first operate on a region containing actually compressed kernel (in case
of compressed uImage, size of u-boot header is an offset to a gzip header)
and then at the end pass the entire region (as it was before taking an offset
into account) to fw_unreserved_regions for freeing.
This approach avoids splitting the uImage probing into 2 stages (executed
before and after decompression) which otherwise would be necessary to
properly parse header, update boot module start and size before
decompression and update zimage.{kernel_addr,len} afterwards.
Remove the limitation from the booting.txt documentation.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewwed-by: Julien Grall <jgrall@amazon.com>
The Xenstore related documentation is currently to be found in
docs/misc/9pfs.pandoc, instead of the related header file
xen/include/public/io/9pfs.h like for most other paravirtualized
device protocols.
There is a comment in the header pointing at the document, but the
given file name is wrong. Additionally such headers are meant to be
copied into consuming projects (Linux kernel, qemu, etc.), so pointing
at a doc file in the Xen git repository isn't really helpful for the
consumers of the header.
This situation is far from ideal, which is already being proved by the
fact that neither qemu nor the Linux kernel are implementing the
device attach/detach protocol correctly.
Change that by moving the Xenstore related 9pfs documentation from
docs/misc/9pfs.pandoc into xen/include/public/io/9pfs.h.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Currently, kernel_uimage_probe() does not read the load/entry point address
set in the uImge header. Thus, info->zimage.start is 0 (default value). This
causes, kernel_zimage_place() to treat the binary (contained within uImage)
as position independent executable. Thus, it loads it at an incorrect
address.
The correct approach would be to read "uimage.load" and set
info->zimage.start. This will ensure that the binary is loaded at the
correct address. Also, read "uimage.ep" and set info->entry (ie kernel entry
address).
If user provides load address (ie "uimage.load") as 0x0, then the image is
treated as position independent executable. Xen can load such an image at
any address it considers appropriate. A position independent executable
cannot have a fixed entry point address.
This behavior is applicable for both arm32 and arm64 platforms.
Earlier for arm32 and arm64 platforms, Xen was ignoring the load and entry
point address set in the uImage header. With this commit, Xen will use them.
This makes the behavior of Xen consistent with uboot for uimage headers.
Users who want to use Xen with statically partitioned domains, can provide
non zero load address and entry address for the dom0/domU kernel. It is
required that the load and entry address provided must be within the memory
region allocated by Xen.
A deviation from uboot behaviour is that we consider load address == 0x0,
to denote that the image supports position independent execution. This
is to make the behavior consistent across uImage and zImage.
Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
[stefano: minor doc improvement]
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Make the xenstored internal trace configurable by adding classes
which can be switched on and off independently from each other.
Define the following classes:
- obj: Creation and deletion of interesting "objects" (watch,
transaction, connection)
- io: incoming requests and outgoing responses
- wrl: write limiting
Per default "obj" and "io" are switched on.
Entries written via trace() will always be printed (if tracing is on
at all).
Add the capability to control the trace settings via the "log"
command and via a new "--log-control" command line option.
Add a missing trace_create() call for creating a transaction.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
At the moment, for dom0less domUs, we do not have a way to specify
per domain grant table related limits (unlike when using xl), namely
max version, max number of grant frames, max number of maptrack frames.
This means that such domains always use the values specified by the Xen
command line parameters or their default values if unspecified.
In order to have more control over dom0less domUs, introduce the
following device-tree properties that can be set under domUs nodes:
- max_grant_version to set the maximum grant table version the domain
is allowed to use,
- max_grant_frames to set the maximum number of grant frames the domain
is allowed to have,
- max_maptrack_frames to set the maximum number of grant maptrack frames
the domain is allowed to have.
Update documentation accordingly.
Note that the values obtained from device tree are of type uint32_t,
whereas the d_cfg.max_{grant_frames,maptrack_frames} are of type int32_t.
Call panic in case of overflow. Other sanity checks are already there in
grant_table_init() resulting in panic in case of errors, therefore no
need to repeat them in create_domUs().
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Under certain conditions guests can get the CPU stuck in an unbounded
loop without the possibility of an interrupt window to occur on
instruction boundary. This was the case with the scenarios described
in XSA-156.
Make use of the Notify VM Exit mechanism, that will trigger a VM Exit
if no interrupt window occurs for a specified amount of time. Note
that using the Notify VM Exit avoids having to trap #AC and #DB
exceptions, as Xen is guaranteed to get a VM Exit even if the guest
puts the CPU in a loop without an interrupt window, as such disable
the intercepts if the feature is available and enabled.
Setting the notify VM exit window to 0 is safe because there's a
threshold added by the hardware in order to have a sane window value.
Note the handling of EXIT_REASON_NOTIFY in the nested virtualization
case is passed to L0, and hence a nested guest being able to trigger a
notify VM exit with an invalid context would be able to crash the L1
hypervisor (by L0 destroying the domain). Since we don't expose VM
Notify support to L1 it should already enable the required
protections in order to prevent VM Notify from triggering in the first
place.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Add checking of lock recursion to the hypervisor. This is done by using
a percpu data array for storing the address of each taken lock. Any
attempt to take a lock twice (with the exception of recursive
spinlocks) will result in a crash. This is especially meant for
detecting attempts to take a rwlock multiple times as a reader, which
will only result in a deadlock in case of another cpu trying to get the
lock as a writer in between.
The additional checks are not performance neutral, so they are enabled
only in debug builds per default, as the checks are active only with
CONFIG_DEBUG_LOCKS enabled. The size of the percpu data array can be
selected via a boot parameter.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Some time ago, Linux switched the format of docs to ReST and the format
of device-tree bindings to json-schema.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
This fixes an issue with running C code in a GIF=0 region, that's
problematic when using UBSAN or other instrumentation techniques.
The current logic for AMD SSBD context switches it on every
vm{entry,exit} if the Xen and guest selections don't match. This is
expensive when not using SPEC_CTRL, and hence should be avoided as
much as possible.
When SSBD is not being set from SPEC_CTRL on AMD don't context switch
at vm{entry,exit} and instead only context switch SSBD when switching
vCPUs. This has the side effect of running Xen code with the guest
selection of SSBD, the documentation is updated to note this behavior.
Also note that then when `ssbd` is selected on the command line guest
SSBD selection will not have an effect, and the hypervisor will run
with SSBD unconditionally enabled when not using SPEC_CTRL itself.
As a result of no longer running the code to set SSBD in a GIF=0
region the locking of amd_set_legacy_ssbd() can be done using normal
spinlocks, and some more checks can be added to assure it works as
intended.
Finally it's also worth noticing that since the guest SSBD selection
is no longer set on vmentry the VIRT_SPEC_MSR handling needs to
propagate the value to the hardware as part of handling the wrmsr.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Extend the msrs->virt_spec_ctrl context switching comment.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
The permission scheme of Xenstore nodes is not really covered by
docs/misc/xenstore.txt, other than referring to the Xen wiki.
Add a paragraph explaining the permissions of nodes, and especially
mentioning removal of nodes when a domain has been removed from
Xenstore.
This is part of XSA-419.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Add a xenstore-control command "quota" to:
- show current quota settings
- change quota settings
- show current quota related values of a domain
Note that in the case the new quota is lower than existing one,
Xenstored may continue to handle requests from a domain exceeding the
new limit (depends on which one has been broken) and the amount of
resource used will not change. However the domain will not be able to
create more resource (associated to the quota) until it is back to below
the limit.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
On Sapphire Rapids Xeon (SPR) the C1 and C1E states are basically mutually
exclusive - only one of them can be enabled. By default, 'intel_idle' driver
enables C1 and disables C1E. However, some users prefer to use C1E instead of
C1, because it saves more energy.
This patch adds a new module parameter ('preferred_cstates') for enabling C1E
and disabling C1. Here is the idea behind it.
1. This option has effect only for "mutually exclusive" C-states like C1 and
C1E on SPR.
2. It does not have any effect on independent C-states, which do not require
other C-states to be disabled (most states on most platforms as of today).
3. For mutually exclusive C-states, the 'intel_idle' driver always has a
reasonable default, such as enabling C1 on SPR by default. On other
platforms, the default may be different.
4. Users can override the default using the 'preferred_cstates' parameter.
5. The parameter accepts the preferred C-states bit-mask, similarly to the
existing 'states_off' parameter.
6. This parameter is not limited to C1/C1E, and leaves room for supporting
other mutually exclusive C-states, if they come in the future.
Today 'intel_idle' can only be compiled-in, which means that on SPR, in order
to disable C1 and enable C1E, users should boot with the following kernel
argument: intel_idle.preferred_cstates=4
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Origin: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git da0e58c038e6
Enable C1E (if requested) not only on the BSP's socket / package. Alter
command line option to fit our model, and extend it to also accept
string form arguments.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
This commit sets/tearsdown of p2m pages pool for non-privileged Arm
guests by calling `p2m_set_allocation` and `p2m_teardown_allocation`.
- For dom0, P2M pages should come from heap directly instead of p2m
pool, so that the kernel may take advantage of the extended regions.
- For xl guests, the setting of the p2m pool is called in
`XEN_DOMCTL_shadow_op` and the p2m pool is destroyed in
`domain_relinquish_resources`. Note that domctl->u.shadow_op.mb is
updated with the new size when setting the p2m pool.
- For dom0less domUs, the setting of the p2m pool is called before
allocating memory during domain creation. Users can specify the p2m
pool size by `xen,domain-p2m-mem-mb` dts property.
To actually allocate/free pages from the p2m pool, this commit adds
two helper functions namely `p2m_alloc_page` and `p2m_free_page` to
`struct p2m_domain`. By replacing the `alloc_domheap_page` and
`free_domheap_page` with these two helper functions, p2m pages can
be added/removed from the list of p2m pool rather than from the heap.
Since page from `p2m_alloc_page` is cleaned, take the opportunity
to remove the redundant `clean_page` in `p2m_create_table`.
This is part of CVE-2022-33747 / XSA-409.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
That's possible, because the capability was designed specifically to
allow separate driver handle it, in parallel to unmodified xhci driver
(separate set of registers, pretending the port is "disconnected" for
the main xhci driver etc). It works with Linux dom0, although requires
an awful hack - re-enabling bus mastering behind dom0's backs.
Linux driver does similar thing - see
drivers/usb/early/xhci-dbc.c:xdbc_handle_events().
When controller sharing is enabled in kconfig (option marked as
experimental), dom0 is allowed to use the controller even if Xen uses it
for debug console. Additionally, option `dbgp=xhci,share=` is available
to either prevent even dom0 from using it (`no` value), or allow any
domain using it (`any` value).
In any case, to avoid Linux messing with the DbC, mark this MMIO area as
read-only. This might cause issues for Linux's driver (if it tries to
write something on the same page - like anoter xcap), but makes Xen's
use safe. In practice, as of Linux 5.18, it seems to work without
issues.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Add another work ring buffer for received data, and point IN TRB at it.
Ensure there is always at least one pending IN TRB, so the controller
has a way to send incoming data to the driver.
Note that both "success" and "short packet" completion codes are okay -
in fact it will be "short packet" most of the time, as the TRB length is
about maximum size, not required size.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This allows configuring EHCI and XHCI consoles separately,
simultaneously, such that e.g. one can be used for the console and the
other by the debugger.
This changes string_param() to custom_param() in both ehci and xhci
drivers. Both drivers parse only values applicable to them.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
In order to keep consistency in the device tree binding, there is
no need for static memory allocation feature to define a specific
set of address and size cells for "xen,static-mem" property.
Therefore, this commit reuses the regular #{address,size}-cells
for parsing the device tree "xen,static-mem" property. Update
the documentation accordingly.
Also, take the chance to remove the unnecessary "#address-cells"
and "#size-cells" in the domU1 node of the device tree to only
emphasize the related part that the example is showing.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Andrew Cooper