The commit that added support for retrieving the APIC IDs from the APs
introduced several usages of cpuid() with NULL parameters, which is not
handled by the underlying implementation. For GCC I expect this results in
writes to the physical address at 0, however when using Clang 19.1.2 the
generated code in smp.o for the whole file is:
tools/firmware/hvmloader/smp.o: file format elf32-i386
Disassembly of section .text:
00000000 <smp_initialise>:
0: 55 pushl %ebp
1: 89 e5 movl %esp, %ebp
3: 53 pushl %ebx
4: 31 c0 xorl %eax, %eax
6: 31 c9 xorl %ecx, %ecx
8: 0f a2 cpuid
Showing the usage of a NULL pointer results in undefined behavior, and
Clang refusing to generate further code after it.
Fix by using a temporary variable in cpuid_count() in place for any NULL
parameter.
Fixes: 9ad0db58c7 ('tools/hvmloader: Retrieve APIC IDs from the APs themselves')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
We can now easily use __SIZEOF_LONG__ instead. For this to also work in
the test harness, move hvmloader's STR() to common-macros.h.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
hvmloader's cpuid() implementation deviates from Xen's in that the value
passed on ecx is unspecified. This means that when used on leaves that
implement subleaves it's unspecified which one you get; though it's more
than likely an invalid one.
Import Xen's implementation so there are no surprises.
Fixes: 318ac791f9 ("Add utilities needed for SMBIOS generation to hvmloader")
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The IO port, MSR, IO-APIC and LAPIC accessors compile typically to single or
pairs of instructions, which is less overhead than even the stack manipulation
to call the helpers.
Move the implementations from util.c to being static inlines in util.h
In addition, turn ioapic_base_address into a constant as it is never modified
from 0xfec00000 (substantially shrinks the IO-APIC logic), and make use of the
"A" constraint for WRMSR/RDMSR like we already do for RDTSC.
Bloat-o-meter reports a net:
add/remove: 0/13 grow/shrink: 0/18 up/down: 0/-790 (-790)
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Consolidate to a single set of common macros for tools.
MB() will gain another use in libelf, so this movement makes it
available.
Requested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Since c/s 73b13705af ("firmware: provide a stand alone set of headers"),
we've had a proper stddef.h. Actually use it.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
util.h contains a definition of offsetof(), which isn't needed, as
firmware/include/stddef.h's doesn't really need overriding.
Remove it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Defining min(), min_t(), max() and max_t() at other places than
xen-tools/common-macros.h isn't needed, as the definitions in said
header can be used instead.
Same applies to BUILD_BUG_ON() in hvmloader.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
__bug() and __assert_failed() are not meant to modify the string
parameters. So mark them as const.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
MFENCE is overly heavyweight for SMP semantics on WB memory, because it also
orders weaker cached writes, and flushes the WC buffers.
This technique was used as an optimisation in Java[1], and later adopted by
Linux[2] where it was measured to have a 60% performance improvement in VirtIO
benchmarks.
The stack is used because it is hot in the L1 cache, and a -4 offset is used
to avoid creating a false data dependency on live data.
For 64bit userspace, the Red Zone needs to be considered. Use -32 to allow
for a reasonable quantity of Red Zone data, but still have a 50% chance of
hitting the same cache line as %rsp.
Fix up the 32 bit definitions in HVMLoader and libxc to avoid a false data
dependency.
[1] https://shipilev.net/blog/2014/on-the-fence-with-dependencies/
[2] https://git.kernel.org/torvalds/c/450cbdd0125cfa5d7bbf9e2a6b6961cc48d29730
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Guest kernel does need to know in some cases where the tables are located
to treat these regions properly. One example is kexec process where
the first kernel needs to pass ACPI region locations to the second
kernel which is now a requirement in Linux after 02a3e3cdb7f12 ("x86/boot:
Parse SRAT table and count immovable memory regions") in order for kexec
transition to actually work.
That commit introduced accesses to XSDT and SRAT while the second kernel
is still using kexec transition tables. The transition tables do not have
e820 "reserved" regions mapped where those tables are located currently
in a Xen guest. Instead "ACPI data" regions are mapped with the transition
tables that was introduced by the following commit 6bbeb276b7 ("x86/kexec:
Add the EFI system tables and ACPI tables to the ident map").
Reserve 1MB (out of 16MB currently available) right after ACPI info page for
ACPI tables exclusively but populate this region on demand and only indicate
populated memory as "ACPI data" since according to ACPI spec that memory is
reclaimable by the guest if necessary. That is close to how we treat
the same ACPI data in PVH guests. 1MB should be enough for now but could be
later extended if required.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
instead of hardcoding values. We also drop the uint64_t
cast as the macro uses ULL to produce the proper width
types.
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We need to choose ACPI tables properly depending on the device
model version we are running. Previously, this decision was
made by BIOS type specific code in hvmloader, e.g. always load
QEMU traditional specific tables if it's ROMBIOS and always
load QEMU Xen specific tables if it's SeaBIOS.
This change saves this behavior (for compatibility) but adds
an additional way (xenstore key) to specify the correct
device model if we happen to run a non-default one. Toolstack
bit makes use of it.
The enforcement of BIOS type depending on QEMU version will
be lifted later when the rest of ROMBIOS compatibility fixes
are in place.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
We need to choose ACPI tables and ACPI IO port location
properly depending on the device model version we are running.
Previously, this decision was made by BIOS type specific
code in hvmloader, e.g. always load QEMU traditional specific
tables if it's ROMBIOS and always load QEMU Xen specific
tables if it's SeaBIOS.
This change saves this behavior (for compatibility) but adds
an additional way (xenstore key) to specify the correct
device model if we happen to run a non-default one. Toolstack
bit makes use of it.
The enforcement of BIOS type depending on QEMU version will
be lifted later when the rest of ROMBIOS compatibility fixes
are in place.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
3a7f872a ("tools: lift BUILD_BUG_ON to a tools header file") was taken
out from an rather old half finished branch by dropping unrelated
changes. Unfortunately two issues sneaked in.
1. Hvmloader should be standalone. Revert the changes to hvmloader.
2. The define guard in libs.h was erroneously deleted. Add that back.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Only define BUILD_BUG_ON when there isn't one already, because mini-os
currently leaks that.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In preparation for moving out ACPI builder make all
BIOSes call hvmloader_acpi_build_tables() instead of
calling ACPI code directly.
No functional changes.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
hvmloader is unhosted, and shouldn't use the system errno.h. It already has
to use Xen's errno.h for other hypercalls. The use of public/io/xs_wire.h
requires the use of un-prefixed errno values.
This fixes the build on stricter toolchains where requesting -fno-builtin does
reduce the include path as much as it can.
Reported-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Now we get this map layout by call XENMEM_memory_map then
save them into one global variable memory_map[]. It should
include lowmem range, rdm range and highmem range. Note
rdm range and highmem range may not exist in some cases.
And here we need to check if any reserved memory conflicts with
[RESERVED_MEMORY_DYNAMIC_START, RESERVED_MEMORY_DYNAMIC_END).
This range is used to allocate memory in hvmloder level, and
we would lead hvmloader failed in case of conflict since its
another rare possibility in real world.
CC: Keir Fraser <keir@xen.org>
CC: Jan Beulich <jbeulich@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: Ian Campbell <ian.campbell@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The emacs variable to set the C style from a local variable block is
c-file-style, not c-set-style.
Signed-off-by: David Vrabel <david.vrabel@citrix.com
Currently it is assumed PCI device BAR access < 4G memory. If there is
such a device whose BAR size is larger than 4G, it must access > 4G
memory address. This patch enable the 64bits big BAR support on
hvmloader.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Committed-by: Keir Fraser <keir@xen.org>
and populate it at boot time with a value read from
"platform/generation_id". Also add code to libxl to populate this
xenstore key with the value of a new 'generation_id' parameter in the
VM config file. Populate the ADDR package of VM_Gen_Counter ACPI
device such that the first integer evaluates to the low order 32 bits
of the buffer address and the second integer evaluates to the high
order 32 bits of the buffer address.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
These can be used by BIOS-specific handlers to set up memory regions
as required by their firmware payload.
Use mem_hole_alloc() to allocate properly reserved space for the
shared-info-page mapping. The old location conflicts with space
required for the OVMF BIOS (support for which is work in progress).
Signed-off-by: Keir Fraser <keir@xen.org>
SeaBIOS will reserve memory in the e820 as necessary, including BIOS
data structures such as the EBDA, any tables it creates or copies into
pleace etc. Therefore arrange that the memory map provided by
hvmloader to SeaBIOS reserves only things which HVMloader has created.
Since ROMBIOS is more tightly coupled with hvmloader we retain the
ability to reserve BIOS regions in the hvmloader produced e820 and use
that from the ROMBIOS backend.
The code for this could probably have been simpler but the existing
code avoids overlapping e820 areas and so the new code does the same
(many guest OSes sanitize the e820 map to handle this, but I wouldn't
trust that all do, so I didn't take the risk)
For ROMBIOS the resulting e820 map as seen by the guest is the same
except the reserved regions at 0x9e000-0x9fc00,0x9fc00-0xa0000 are
merged into a single region 0x9e000-0xa0000 (Linux guests sanitize the
e820 to look like this anyway).
For SeaBIOS the result is that the lowmem reserved region is from
0x9f000-0xa0000 rather than 0x9e000-0xa0000 which correctly reflects
SeaBIOS's actual usage.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Returns memory which is passed to the subsequent BIOS but can be
reused once the contents is consumed. An example of this would be a
BIOS table which the BIOS consumes by copying rather than simply
referencing.
Users which need a temporary scratch buffer for internal use
scratch_start which follows these allocations.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Instead of hardcoding in a header.
Reduces the cross talk between ROMBIOS and hvmloader.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Roger Pau Monne
Jan Beulich
Alejandro Vallejo
Andrew Cooper
Jason Andryuk
Juergen Gross
Julien Grall
Igor Druzhinin
Konrad Rzeszutek Wilk
Wei Liu
Boris Ostrovsky
Anthony PERARD
Tiejun Chen
Don Slutz
David Vrabel
George Dunlap
Xiantao Zhang
Paul Durrant
Keir Fraser
Ian Campbell