When --with-system-qemu is used, it is possible that we cannot find
qemu-system-i386 in LIBEXEC_BIN, which can cause error in xencommons
init script and xen-qemu-dom0-disk-backend.service systemd service.
Signed-off-by: Ting-Wei Lan <lantw44@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
The removal of the udev rules highlighted that although it has been
replaced by "xl devd" there isn't an initscript to replace it.
To enable this add a --pidfile option to xl devd.
Tested on Linux by running the script in dom0 and checking the daemon
was started/stopped, but not in an actual driver domain environment
since I don't have one conveniently available. I also checked that
running without the --pidfile option still works.
Scripts mainly cribbed from the xencommons for each platform.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad@darnok.org>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The blocktap library isn't really necessary; all the necessary functionality
is available via the tap-ctl binary.
To use:
script=block-tap,vdev=[whatever],target=vhd:/path/to/file.vhd
script=block-tap,vdev=[whatever],target=aio:/path/to/file.raw
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
They are no longer needed, having been replaced by a daemon for
driverdomains which will run scripts as necessary.
Worse yet, they seem to be broken for script-based block devices, such
as block-iscsi. This wouldn't matter so much if they were never run
by default; but if you run block-attach without having created a
domain, then the appropriate node to disable running udev scripts will
not have been written yet, and the attach will silently fail.
Rather than try to sort out that issue, just remove them entirely.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
On creation time, tap and xnb interfaces are created with an mtu of
1500 bytes, assuming the bridge will have the same value.
Instead, check the bridge mtu and configure the new xnb or
tap interface with the same value.
The tools used are sed and ifconfig, both included on base. No need
to install additional ports (no new dependences).
Signed-off-by: Gustau Perez <gustau.perez@gmail.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.cmapbell@citrix.com>
[ ijc -- clarified title ]
Don't kill xenstored as part of the usual service shutdown process to
prevent hangs on shutdown where the kernel tries to unplug a VIF
after xenstored has exited.
In an ideal case with all guests cooperating, xendomains will have shut
down all guests before xenstored is killed.
However in the uncooperative case, malicious or crashed guests may still
be running after xendomains has exited and this should not block the
shutdown/reboot of dom0.
Xenstored has no state to sync to disk, and never used to be killed in
the sysvinit case; observe the warning in xencommons. Our testing has
shown regressions caused by the change in behaviour between sysvinit and
systemd when it comes to killing xenstored.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- added systemd to title ]
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This was disabled by default in Xen 4.4. Since xend has now been
removed from the tree I don't believe anything is using it.
We need to pass an explicit CONFIG_BLKTAP1=n to qemu-xen-traditional
otherwise it defaults to y and doesn't build.
This patch does all the ground work, the tools/blktap directory will
be removed in the next (*huge*) patch.
Note that this has no impact on blktap2, which is what libxl supports.
blktap1 was only usable via xend which has already been removed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch resurrects 11a63a166. The previous patch had a bug that
wrong "physical-device" was written to xenstore causing block script
execution fail. This patch fixes that problem.
Following configurations have been tested:
1. Raw file and PV
2. Raw file and HVM
3. Block device and PV
4. Block device and HVM
Creation / destruction / local migration all worked.
Original commit message from 11a63a166:
Modify libxl and hotplug script to allow raw format file to use phy
backend.
The block script now tests the path and determine the actual type of
file (block device or regular file) then use the actual type to
determine which branch to run.
With these changes, plus the current ordering of backend preference (phy
> qdisk > tap), we will use phy backend for raw format file by default.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Using SELinux mount options per default breaks several systems.
Either the context= mount option is not known at all to the kernel,
as reported for ArchLinux. Or the default value "none" is unknown to
SELinux, as reported for Fedora. In both cases the unit will fail.
The proper place to specify mount options is /etc/fstab. Apparently
systemd is kind enough to use values from there even if Options= or
What= is specified in a .mount file.
Remove XENSTORED_MOUNT_CTX, the reference to a non-existent
EnvironmentFile and trim default Options= for the mount point.
The removed code was first mentioned in the patch referenced below,
with the following description:
...
* Some systems define the selinux context in the systemd Option for
the /var/lib/xenstored tmpfs:
Options=mode=755,context="system_u:object_r:xenstored_var_lib_t:s0"
For the upstream version we remove that and let systems specify
the context on their system /etc/default/xenstored or
/etc/sysconfig/xenstored $XENSTORED_MOUNT_CTX variable
...
It is nowhere stated (on xen-devel) what "Some systems" means, which
is unfortunately common practice in nearly all opensource projects.
http://lists.xenproject.org/archives/html/xen-devel/2014-03/msg02462.html
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Anthony PERARD <anthony.perard@citrix.com>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Since commit 4542ae340d ("tools/hotplug:
systemd xenstored dependencies") all service files use the .socket unit
as startup dependency. While this happens to work for boot it fails for
shutdown because a .socket does not seem to enforce ordering. When
xendomains.service runs during shutdown then systemd will stop
xenstored.service at the same time.
Change all "xenstored.socket" to "xenstored.service" to let systemd know
that xenstored has to be shutdown after everything else.
Reported-by: Mark Pryor <tlviewer@yahoo.com>
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A small helper to draw a graph with dot(1) and show it with display(1):
bash tools/hotplug/Linux/systemd/show_service_dependencies.sh \
tools/hotplug/Linux/systemd/*.in
A red line means Requires= aka "enable it"
A blue line means After=
A green line means Before=
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Every systemd service file uses /proc/xen/capabilites to check if it
runs in a dom0. Update every service file to enable proc-xen.mount with
the Requires= statement and schedule its startup with the After=
statement.
In some places var-lib-xenstored.mount is removed. This is ok because
its optional and this unit is enabled by xenstored itself. After all its
a private directory for xenstored.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Everything which uses xenstored does this via the socket. Update the
existing service files to enable the xenstored.socket with the Requires=
statement. And schedule startup of the given service files after the
socket is enabled with the After= statement.
Once something tries to access the socket systemd will launch xenstored.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
ConditionVirtualization= checks if systemd runs in some sort of guest.
It is not supposed to detect host capabilities. The current
implementation happens to work because systemd-detect-virt from v208
returns also 'xen' in a dom0. In v210 and later 'none' is returned and
no service files will be started.
Adjust the checks to detect a dom0 vs. native boot. Mounting xenfs
depends on /proc/xen, but should only be done for pvops because xenfs
exists only there. All other service files should not be started in
domU. The file /proc/xen/capabilities exists in both dom0 and domU in a
pvops kernel, but only in dom0 it contains 'control_d'. The existing
ExecStartPre= check will prevent starting in a domU.
ConditionVirtualization=!xen is true in a dom0. But this check is broken
in systemd v208, so its not used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The "install" rules depends on both "all" and "subdirs-install" and
"all" depends on "subdirs-all". This leads the "install" rules to call
both "subdirs-all" and "subdirs-install" which create a race with two
concurrent `make` within the same directory (systemd) trying to make the
same things (xen.conf) and failing.
Ultimatly, "install" should only depend on the things it needs to
install, and not on "all".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This reverts commit eac3f5122f.
The "all" target should never depend on "install", it is supposed to only build
not install.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
This replaces config/Linux.modules with a configure option. As a result
of this change only a single xencomons.in is required, instead of a
xencomons.in.in and sed hackery.
After this change blktap2 and blktap will be loaded at the same time.
This is already done in out-of-tree xencommons scripts, and systemd will
load both modules as well. No harm is expected by loading both modules.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
The current usage of LIBEXEC is bogus. It describes the directory for
private xen executables. Other places create their own, similar
libexecdir path as $prefix/lib/xen/*.
Additional two other variables are used to describe similar paths:
PRIVATE_BINDIR and PRIVATE_PREFIX
The autoconf documentation refers to libexec as a directory for
executables and stuff which is called by other programs, not by the
user.
Adjust all places that want libexecdir as a target path. LIBEXEC refers
now to the base directory. Three convenience variables are used to refer
to paths to private binaries, libs and include files.
In the systemd files LIBEXEC_BIN is substituted, so this variable has to
be present in autoconf. All other variables are expanded in Paths.mk
because they are only used in Makefiles.
Most users of LIBEXEC are updated to use LIBEXEC_BIN because that is
what they want.
Users of PRIVATE_BINDIR are updated to use LIBEXEC_BIN because that is
what they want. PRIVATE_BINDIR and PRIVATE_PREFIX usage is removed by
this patch, in favour of LIBXEC_BIN and LIBEXEC
An internal libxl function was removed. A single helper to retrieve
LIBEXEC_BIN remains.
As suggested by the autoconf documentation, configure appends the
package name to LIBEXEC to make sure the provided directory really
refers to xen. This makes sure "make uninstall" preserves the real
libexecdir.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested, updated QEMU_TRADITIONAL_REVISION to
pickup version which uses LIBEXEC_BIN ]
Helper scripts get installed into XEN_SCRIPT_DIR, but initscripts,
helper scripts and udev rules still refer to the hardcoded location
/etc/xen/scripts/. Update scripts, rules and Makefile to refer to
@XEN_SCRIPT_DIR@ instead.
Update configure.ac to substitute the path in files using
XEN_SCRIPT_DIR. Remove XEN_SCRIPT_DIR from StdGNU.mk and SunOS.mk, its
already in Paths.mk.
Note: In SunOS.mk it refered to PRIVATE_PREFIX, which was introduced by
9f6d07bac9 ("tools: get rid of hardcoded
config dirs").
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
A make -j8 will call the xen.conf rule twice. The move-if-changed
macro may fail if the tmp file was already removed by the other make
process. Fix this by let the all target depend on install.
Also remove the generated file with make clean.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- fixed s/of/if/ typo in commit message ]
This patch adds the machinery required for protecting a guest's
disk state, when the guest disk uses a DRBD disk backend.
This patch comprises of two parts:
1. Hotplug scripts: The block-drbd-probe script is responsible for
performing sanity checks on the state of the DRBD disk before the
checkpointing process begins. This script should be invoked by
libxl for each of the guest's disk devices, when starting Remus.
2. Remus drbd disk device: Implements the interfaces required by the
remus abstract device layer. A note about the implementation:
a) setup() is called for each disk attached to the guest.
During setup():
i) The hotplug script is called to perform the sanity check.
ii) Libxl obtains a handle to the DRBD device (/dev/drbd*) and
and subsequently controls disk checkpoint replication using
this handle in the checkpoint callbacks.
c) The preresume() checkpoint callback is executed asynchronously
using libxl__ev_child_fork(), as it may potentially block for more
than few seconds in case of backup failure.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This patch adds the machinery required for protecting a guest's
network device state. This patch comprises of two parts:
1. Hotplug scripts: The remus-netbuf-setup script is responsible for
setting up and tearing down the necessary infrastructure required for
network output buffering. This script should be invoked by libxl for
each of the guest's network interfaces, when starting or stopping Remus.
Apart from returning success/failure indication via the usual hotplug
entries in xenstore, this script also writes to xenstore, the name of
the REMUS_IFB device to be used to control the vif's network output.
The script relies on libnl3 command line utilities to perform various
setup/teardown functions. The script is confined to Linux platforms only
since NetBSD does not seem to have libnl3.
2. Remus network device: Implements the interfaces required by the
remus abstract device layer. A note about the implementation:
a) init_subkind_nic() & cleanup_subkind_nic() are called once per Remus
invocation. They establish and free netlink related state respectively.
b) setup() and teardown are called for each vif attached to the
guest.
During setup():
i) The hotplug script is called to setup a network buffer on a
given vif. The script chooses an available IFB device from
the system, redirects vif egress traffic to the IFB device
and sets up the plug qdisc (output buffer) on the IFB device.
The name of the IFB device is communicated via xenstore to
libxl.
ii) Libxl obtains a handle to the plug qdisc using the libnl3 API
and subsequently controls output buffering using this handle
in the checkpoint callbacks.
During teardown(), the hotplug scripts are called again to remove
the vif->ifb traffic redirection, release the ifb and the plug
qdisc associated with it.
c) The checkpoint callbacks [postsuspend(), preresume() and commit()]
are implemented as synchronous ops as the netlink calls associated
with the qdisc subsystem are very fast.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
genpath is a detail of buildmakevars2file. Replace the dependency to
genpath with the actual buildmakevars2file target. This change by
itself does not fix any bug. Upcoming changes will add dependencies to
$(target), but no rule exist to create $(target).
To force a rebuild of the $(1) rule the target now depends on the
existing .phony target. This dummy target is already used elsewhere in
the code.
No change in behaviour is expected by this patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Create XEN_LOCK_DIR because it is a compiletime setting. Also /var/lock
might be empty on startup because it is a tmpfs mount point.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Ian Campbell