Instead of trying to read xenstore via xenstore-read use the pidfile
of xenstored for the test whether xenstored is running. This prepares
support of xenstore domain, as trying to read xenstore will block
for ever in case xenstore domain is started after trying to read.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In order to prepare starting a xenstore domain split out the starting
of the xenstore daemon from the xencommons script into a dedicated
launch-xenstore script.
A rerun of autogen.sh is required.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
On a system with systemd the xenstore sockets are created via systemd.
Remove the related configuration files in order to be able to decide
at runtime whether the sockets should be created or not. This will
enable Xen to start xenstore either via a daemon or via a stub domain.
As the xenstore domain start program will exit after it has done its
job prepare the same behaviour to be tolerated by systemd for the
xenstore daemon by specifying the appropriate flags in the service
file.
A rerun of autogen.sh is required.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: David Scott <dave@recoil.org>
Having DefaultDependencies=no means it can be started before / is
remounted read-write, which will result in various failures (to start
with opening the log).
Since "libxl: trigger attach events for devices attached before xl devd
startup" it is no longer important to start it as early as possible,
because it will process devices created before its startup.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Store various PID files under XEN_RUN_DIR. Note that this change the
default location from /var/run to /var/run/xen.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
A dedicated Xen driver domain init service starts "xl devd" in domU. But
currently, it is only supplied in the form of a SysV init script, which
systemd users run through a backward compatiblity wrapper automatically
generated by systemd-sysv-generator. This patch adds a (naturally more
lightweight) native systemd unit to be used instead.
The xendriverdomain service is only relevant to domU, but should not run
in dom0. Therefore, the systemd unit uses "ConditionVirtualization=xen",
which evaluates to true in domU and (since systemd version 214, released
on 2014-06-11) to false in dom0. Users or distributors who need to be
compatible with even older systemd versions, but still want to prevent
"xl devd" startup in dom0, could add the following line in [Service]:
ExecStartPre=/bin/sh -c "! grep -q control_d /proc/xen/capabilities"
(Please rerun autogen.sh after applying this patch)
Signed-off-by: Rusty Bird <rustybird@openmailbox.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: rerun autogen.sh ]
At the moment, the xendomains init script will only create a lockfile
if when started, it actually does something -- either tries to restore
a previously saved domain as a result of XENDOMAINS_RESTORE, or tries
to create a domain as a result of XENDOMAINS_AUTO.
RedHat-based SYSV init systems try to only call "${SERVICE} shutdown"
on systems which actually have an actively running component; and they
use the existence of /var/lock/subsys/${SERVICE} to determine which
systems are running.
This means that at the moment, on RedHat-based SYSV systems (such as
CentOS 6), if you enable xendomains, and have XENDOMAINS_RESTORE set
to "true", but don't happen to start a VM, then your running VMs will
not be suspended on shutdown.
Since the lockfile doesn't really have any other effect than to
prevent duplicate starting, just create it unconditionally every time
we start the xendomains script.
The other option would have been to touch the lockfile if
XENDOMAINS_RESTORE was true regardless of whether there were any
domains to be restored. But this would mean that if you started with
the xendomains script active but XENDOMAINS_RESTORE set to "false",
and then changed it to "true", then xendomains would still not run the
next time you shut down. This seems to me to violate the principle of
least surprise.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Commit c996572 changed the LOCKFILE path from a check between two
hardcoded paths (/var/lock/subsys/ or /var/lock) to using the
XEN_LOCK_DIR variable designated at configure time. Since
XEN_LOCK_DIR doesn't (and shouldn't) have the 'subsys' postfix, this
effectively moves all the lock files by default to /var/lock instead.
Unfortunately, this breaks xendomains on RedHat-based SYSV init
systems. RedHat-based SYSV init systems try to only call "${SERVICE}
shutdown" on systems which actually have an actively running
component; and they use the existence of /var/lock/subsys/${SERVICE}
to determine which systems are running.
Changing XEN_LOCK_DIR to /var/lock/subsys is not suitable, as only
system services like xendomains should create lockfiles there; other
locks (such as the console locks) should be created in /var/lock
instead.
Instead, re-instate the check for the subsys/ subdirectory of the lock
directory in the xendomains script.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Most implementations of the sleep command only take integers. GNU
coreutils has a GNU extension to allow any floating point number to be
passed but we shouldn't depend on that.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
The original same_vm check has two bugs. When stubdom is in use because
it relies on numeric domid to check if two domains are in fact the same
one. Another one is that the check would fail when two stubdoms are
checked against each other.
The first bug is fixed by using uuid to identify a domain. The second
bug is fixed by comparing the domains two stubdoms serve.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
COLO and Remus net buffer support both depend on the availability of
libnl. Use a generic name.
No functional changes.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Change block-common.sh on Linux to write physical-device-path with the
path of the device node, in addition to physical-device with its
major:minor numbers.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: George Dunlap <george.dunlap@citrix.com>
Testing the hotplug external script path at the moment involves
actually setting up one of the alternate datapaths (blktap, iscsi,
&c). Simplify testing by making a script which does a simple loopback,
but still has a target that can't be used directly.
To use:
script=block-dummy,vdev=xvda,target=dummy:<file>
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: George Dunlap <george.dunlap@citrix.com>
Commit 6ef823fd added '-nodefaults' to the qemu args created by
libxl, which is a good step in restricting qemu's default
configuration. This change takes another step by adding
-no-user-config, which ignores any user-provided config files in
sysconfdir. Together, -nodefaults and -no-user-config allow Xen
to avoid unkown and uncontrolled qemu configuration.
Both options are also added to the qemu invocation in the
xen-qemu-dom0-disk-backend systemd service file.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When restarting or shutting down dom0 the xendomains script tries to
stop all other domains. Don't do this for the xenstore domain, as it
might survive a dom0 reboot in the future.
The same applies to xl shutdown --all. Here the xenstore domain is
flagged as "never stop".
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Since commit:
"xendomains initscript: test for privcmd char device"
(1367e9e5ba)
due to incorrect negation the xendomains initscript bails out
early when both: "/dev/xen/privcmd" and "/proc/xen/privcmd"
are present in dom0.
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Previously, xenconsoled's daemonize function would do nothing if its
parent process is init (as it is under systemd but not sysv init).
This is confusing. Instead, always daemonize when asked to, but use the
"interactive" switch when running from the systemd service.
Because a pidfile is only written when daemonizing, drop the pidfile
parameters from the service file (systemd keeps track of the pids
anyway).
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
xendomains will manage guests behind libvirts back:
- libvirt starts a guest
- that guest can be "managed" by libvirt and xl at the same time
- when xendomains runs on shutdown it will save the guest using xl
libvirt does not know about this
- when xendomains runs on boot it will restore the saved guest using xl
libvirt does not know about this, it will just fail to manage the
restored guest
To prevent xendomains from interfering with libvirt add a Conflicts= to
xendomains.service. It will cause libvirt to be stopped if xendomains is
started manually with 'systemctl start'.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
During the attachment of a loopback mounted image file, the mode of all
curent instances of this device already attached to other domains must be
checked. This requires finding all loopback devices pointing to the inode
of the shared image file, and then comparing the major and minor number of
these devices to the major and minor number of every vbd device found in the
xenstore database.
Prior to this patch, the entire xenstore database is walked for every instance
of every loopback device pointing to the same shared image file. This process
causes the block attachment process to becomes exponentially slower with every
additional attachment of a shared image.
Rather than scanning all of xenstore for every instance of a shared loopback
device, this patch creates a list of the major and minor numbers from all
matching loopback devices. After generating this list, Xenstore is walked
once, and major and minor numbers from every vbd are checked against the list.
If a match is found, the mode of that vbd is checked for compatibility with
the mode of the device being attached.
Signed-off-by: Mike Latimer <mlatimer@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When --with-system-qemu is used, it is possible that we cannot find
qemu-system-i386 in LIBEXEC_BIN, which can cause error in xencommons
init script and xen-qemu-dom0-disk-backend.service systemd service.
Signed-off-by: Ting-Wei Lan <lantw44@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
The removal of the udev rules highlighted that although it has been
replaced by "xl devd" there isn't an initscript to replace it.
To enable this add a --pidfile option to xl devd.
Tested on Linux by running the script in dom0 and checking the daemon
was started/stopped, but not in an actual driver domain environment
since I don't have one conveniently available. I also checked that
running without the --pidfile option still works.
Scripts mainly cribbed from the xencommons for each platform.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad@darnok.org>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The blocktap library isn't really necessary; all the necessary functionality
is available via the tap-ctl binary.
To use:
script=block-tap,vdev=[whatever],target=vhd:/path/to/file.vhd
script=block-tap,vdev=[whatever],target=aio:/path/to/file.raw
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
They are no longer needed, having been replaced by a daemon for
driverdomains which will run scripts as necessary.
Worse yet, they seem to be broken for script-based block devices, such
as block-iscsi. This wouldn't matter so much if they were never run
by default; but if you run block-attach without having created a
domain, then the appropriate node to disable running udev scripts will
not have been written yet, and the attach will silently fail.
Rather than try to sort out that issue, just remove them entirely.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Don't kill xenstored as part of the usual service shutdown process to
prevent hangs on shutdown where the kernel tries to unplug a VIF
after xenstored has exited.
In an ideal case with all guests cooperating, xendomains will have shut
down all guests before xenstored is killed.
However in the uncooperative case, malicious or crashed guests may still
be running after xendomains has exited and this should not block the
shutdown/reboot of dom0.
Xenstored has no state to sync to disk, and never used to be killed in
the sysvinit case; observe the warning in xencommons. Our testing has
shown regressions caused by the change in behaviour between sysvinit and
systemd when it comes to killing xenstored.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- added systemd to title ]
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This was disabled by default in Xen 4.4. Since xend has now been
removed from the tree I don't believe anything is using it.
We need to pass an explicit CONFIG_BLKTAP1=n to qemu-xen-traditional
otherwise it defaults to y and doesn't build.
This patch does all the ground work, the tools/blktap directory will
be removed in the next (*huge*) patch.
Note that this has no impact on blktap2, which is what libxl supports.
blktap1 was only usable via xend which has already been removed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch resurrects 11a63a166. The previous patch had a bug that
wrong "physical-device" was written to xenstore causing block script
execution fail. This patch fixes that problem.
Following configurations have been tested:
1. Raw file and PV
2. Raw file and HVM
3. Block device and PV
4. Block device and HVM
Creation / destruction / local migration all worked.
Original commit message from 11a63a166:
Modify libxl and hotplug script to allow raw format file to use phy
backend.
The block script now tests the path and determine the actual type of
file (block device or regular file) then use the actual type to
determine which branch to run.
With these changes, plus the current ordering of backend preference (phy
> qdisk > tap), we will use phy backend for raw format file by default.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Using SELinux mount options per default breaks several systems.
Either the context= mount option is not known at all to the kernel,
as reported for ArchLinux. Or the default value "none" is unknown to
SELinux, as reported for Fedora. In both cases the unit will fail.
The proper place to specify mount options is /etc/fstab. Apparently
systemd is kind enough to use values from there even if Options= or
What= is specified in a .mount file.
Remove XENSTORED_MOUNT_CTX, the reference to a non-existent
EnvironmentFile and trim default Options= for the mount point.
The removed code was first mentioned in the patch referenced below,
with the following description:
...
* Some systems define the selinux context in the systemd Option for
the /var/lib/xenstored tmpfs:
Options=mode=755,context="system_u:object_r:xenstored_var_lib_t:s0"
For the upstream version we remove that and let systems specify
the context on their system /etc/default/xenstored or
/etc/sysconfig/xenstored $XENSTORED_MOUNT_CTX variable
...
It is nowhere stated (on xen-devel) what "Some systems" means, which
is unfortunately common practice in nearly all opensource projects.
http://lists.xenproject.org/archives/html/xen-devel/2014-03/msg02462.html
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Anthony PERARD <anthony.perard@citrix.com>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Since commit 4542ae340d ("tools/hotplug:
systemd xenstored dependencies") all service files use the .socket unit
as startup dependency. While this happens to work for boot it fails for
shutdown because a .socket does not seem to enforce ordering. When
xendomains.service runs during shutdown then systemd will stop
xenstored.service at the same time.
Change all "xenstored.socket" to "xenstored.service" to let systemd know
that xenstored has to be shutdown after everything else.
Reported-by: Mark Pryor <tlviewer@yahoo.com>
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Juergen Gross