Use vdevfn in xm_pci_attach() for non-zero functions,
the vslot element of dev dictionaries no longer exists.
Signed-off-by: Simon Horman <horms@verge.net.au>
pciback is used by VT-d to hide device for assigment. But in pv-ops
dom0, pciback is not supported yet. Fortunately, pci-stub module is
used to hide device in Linux for KVM VT-d device assignment and it's
included in pv-ops dom0. So can use pci-stub to hide devices for
assignment.
Device must be hidden before assignment. Control panel has checks if
devices can be assigned or not, and can list assignable devices via
reading devices owned by pciback. This patch changes the checks, and
also list assignable devices which are owned by pci-stub. Use pci-stub
to hide devices, and use this patch to pass checkes in control panel,
device assignemnt with VT-d works on Xen with pv-ops dom0.
Signed-off-by: Weidong Han <weidong.han@intel.com>
blktap2 devices use a regular 'phy' vbd blkback backend, causing
Blktap2Controller to trample the devices' parameters. This causes
problems with save/restore and managed domains, among other
things. This patch modifies Blktap2Controller to store both the vbd
and tap2 parameters in xenstore, and stops it from trampling the
device's config on device creation.
* store blktap2 parameters in xenstore
* restore blktap2 device config to original state once the underlying
* vbd
device is created (this fixes managed domains)
* use blktap2 parameters rather than vbd parameters when building
* blktap2
device configurations
* remove blktap2 specific code from XendConfig
Signed-off-by: Ryan O'Connor <rjo@cs.ubc.ca>
* seperate blktap1/blktap2 disk types
* use blktap1 when driver is not in explicit list of blktap2 drivers,
* rather than current check against list of blktap1 only drivers
* remove 'tapdisk' disk type (it is not a tapdisk disk type) and fix
* tapdisk disk type check in XenConfig
Signed-off-by: Ryan O'Connor <rjo@cs.ubc.ca>
blktap2 devices must be handled differently than blktap2
devices. blktap2 devices require a sysfs write to close the underlying
device, as well as extra sysfs writes when the domU is
paused/unpaused. The differences between blktap1 and blktap2 are great
enough to warrant the creation of a new device class, 'tap2', and
device controller for blktap2 devices.
* add a new device controller (Blktap2Controller) and device class
(tap2) for blktap2 devices
* move blktap2 specific code from DevController to Blktap2Controller
* if possible, check xenstore to determine block device class
* use vmpath (/vm/<uuid>/) when releasing devices
* modify linux hotplug cleanup script to handle blktap2 device
removal
Signed-off-by: Ryan O'Connor <rjo@cs.ubc.ca>
* Change default settings to relative pathes.
* Make xend to prepend install directory if entries have no absolute
* path
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
This is an alternative to identity mapping virtual functions.
It works by assigning the numerically lowest virtual function that is
available.
* The order of assignment is thus dependent on the order that physical
functions are specified.
e.g.
config physical virtual
01.00.0,2 -> 01:00.0 -> 00:07.0
-> 01:00.2 -> 00:07.1
is different to
config physical virtual
01.00.2,0 -> 01:00.2 -> 00:07.0
-> 01:00.0 -> 00:07.1
* Physical function 0 need not be present
e.g.
config physical virtual
01.00.1,2 -> 01:00.1 -> 00:07.0
-> 01:00.2 -> 00:07.1
* Functions from the same physical multi-function device
may be exported as multiple multi-function and single-function
devices
e.g.
01.00.0,2 -> 01:00.0 -> 00:07.0
-> 01:00.2 -> 00:07.1
and
01.00.1,3 -> 01:00.1 -> 00:08.1
-> 01:00.3 -> 00:08.1
and
01.00.5 -> 01:00.5 -> 00:09.0
Cc: Dexuan Cui <dexuan.cui@intel.com>
Cc: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Hook things up to allow multi-function pass-through.
This includes making sure that request is valid.
In the case of pci-detach:
* All the functions requested must be attached to the same virtual
slot * and;
* A request must include the functions attached to a virtual slot
Cc: Dexuan Cui <dexuan.cui@intel.com>
Cc: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
When unplugging a function, all functions in the same vslot must be
unplugged, and function 0 must be one of the functions present when a
vslot is hot-plugged. Telling qemu-dm to unplug function 0 also tells
it to unplug all other functions in the same vslot.
Cc: Dexuan Cui <dexuan.cui@intel.com>
Cc: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
The general format is as follows:
Now: SEQ:BUS:DEV.FUNC[@VSLOT][,OPT...]
New: SEQ:BUS:DEV.FUNC0-FUNCN[@VSLOT][,OPT...]
SEQ:BUS:DEV.FUNC0,FUNCM,FUNCN[@VSLOT][,OPT...]
SEQ:BUS:DEV.*[@VSLOT][,OPT...]
In the case of unplug the VSLOT and OPT must be omitted.
Xm expands this notation notation out and passes
more conventional parameters to qemu-xen.
E.g:
0000:00:01.00-03 becomes:
0000:00:01.00
0000:00:01.01
0000:00:01.02
0000:00:01.03
0000:00:01.00,03,05,07 becomes:
0000:00:01.00
0000:00:01.03
0000:00:01.05
0000:00:01.07
For a device that has functions 0, 1, 2, 3, 5 and 7,
0000:00:01.* becomes:
0000:00:01.00
0000:00:01.01
0000:00:01.02
0000:00:01.03
0000:00:01.05
0000:00:01.07
Cc: Dexuan Cui <dexuan.cui@intel.com>
Cc: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Cc: Akio Takebe <takebe_akio@jp.fujitsu.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Instead of suppling a slot number to qemu-xen, supply a devfn.
This and subsequent other changes will allow xend to ask
for more than one function to be inserted into a single slot -
by specifying which function of the slot should be used.
This is a minimal patch for this change. A subsequent
patch that has a lot of noise to rename slot to devfn
is intended to follow.
Cc: Dexuan Cui <dexuan.cui@intel.com>
Cc: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
- Have the buid system generate a file which exports the install paths
for the hotplug scripts and stubdom / stubdom-dm
- Move file generation code from tools/python/Makefile into a gmake
macro
in Config.mk to avoid maintenance of three duplicates each with its
own
tweaks and bugs
- Export gmake variables into ioemu as shell variables
for upcoming ioemu patches
- Do above as a gmake macro to avoid maintenance of several duplicates
- Adjust hotplug scripts to find the right xen binaries from the
install directory
- Adjust stubdom-dm to use the install directories
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
The first start of a managed domain succeeds. But the second
start of the managed domain fails as follows. The problem occurs
when tapdisks are given to the managed domain. I think that the
problem occurs because the uname of tapdisks is overwritten with
"phy:/dev/xen/tadisk-2/tapdev*".
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Using changeset 19791:c0d2838fc10f, I can't create an HVM.
xend.log shows:
File "usr/lib64/python2.4/site-packages/xen/xend/image.py", line
759, in configure
store_dmargs.remove('-sdl')
ValueError: list.remove(x): x not in list
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
Reset BlktapController's device class back to 'tap' once the device
has been created. This fixes save/restore for VMs with blktap2 disks.
Signed-off-by: Ryan O'Connor <rjo@cs.ubc.ca>
Signed-off-by: Dutch Meyer <dmeyer@cs.ubc.ca>
This patch re-enables a useful blktap1 for users who disable blktap2.
Itremoves tapdisk and blktapctrl from blktap2, both of which cause
problems with blktap operation. In addition, this patch modifies xend
to check for blktap2 installation. If the blktap2 driver isn't
running (hopefully because the dom0 kernel option wasn't selected) we
fall back to blktap.
Signed-off-by: Dutch Meyer <dmeyer@cs.ubc.ca>
Add support for the qemu monitor in a stubdom, the same way the
emulated serial support was added few days ago. The stubdom exports
the monitor as a pty and minios opens a console frontend; qemu in dom0
provides the correspondent backend for this additional pv console that
happens to be the qemu monitor.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Using changeset 19783: 61ec78692b13, device assignment can't work:
e.g., in find_the_uppermost_pci_bridge(),
parent = dev_parent.find_parent()
...
dev_parent = PciDevice(parent),
we can see parent['domain'] is int and in PciDevice's __init__,
int(dev['domain'], 16) would fail:
TypeError: int() can't convert non-string with explicit base
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
There seems to be little need to use the domain, bus, slot and
function to look up the virtual slot to pass as the argument to
hvm_destroyPCIDevice(), only to have hvm_destroyPCIDevice() use the
virtual slot for the sole purpose of looking up the domain, bus, slot
and function.
Signed-off-by: Simon Horman <horms@verge.net.au>
Move dev_dict_to_sxp() into XendSXPDev.py. Move
pci_convert_dict_to_sxp() and pci_convert_sxp_to_dict() to pci.py,
where other similar functions live. This makes these functions
accessible outside of the XendConfig class.
Signed-off-by: Simon Horman <horms@verge.net.au>
Share some parsing code between different parts of xm.
This has the side-effect that the device specification for
hot-plug may now include the VSLOT and OPTS as per device
specifictions in the domain configuration file.
SEQ:BUS:DEV.FUNC[,OPT...]
e.g. 0000:00:01.00@6
Signed-off-by: Simon Horman <horms@verge.net.au>
sxp.merge() can't deal with values being a list so instead
of storing pci options as:
[ 'opts', [ 'key1' 'value1'], [ 'key2', 'value2'], ...]
store them as:
[ 'opts', [ 'key1' 'value1'], ['opts', [ 'key2', 'value2']], ...
Signed-off-by: Simon Horman <horms@verge.net.au>
Keir Fraser