... and load BIOS/UEFI firmware into guest memory.
This adds a new firmware module, system_firmware_module. It is loaded in
the guest memory and final location is provided to hvmloader via the
hvm_start_info struct.
This patch create the hvm_start_info struct for HVM guest that have a
device model, so this is now common code with HVM guest without device
model.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Instead of having several representation of hvm_start_info in C, define
it in public/arch-x86/hvm/start_info.h so both libxc and hvmloader can
use it.
Also move the comment describing the binary format to be alongside the
C struct.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently mem-sharing can be performed on a page-by-page basis from the control
domain. However, this process is quite wasteful when a range of pages have to
be deduplicated.
This patch introduces a new mem_sharing memop for range sharing where
the user doesn't have to separately nominate each page in both the source and
destination domain, and the looping over all pages happen in the hypervisor.
This significantly reduces the overhead of sharing a range of memory.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This allows a toolstack to identify whether a running domain is using hardware
assisted paging or not.
The appropriate tests differ by architecture, so introduce
arch_get_domain_info(). ARM unconditionally sets the new flag, while x86
checks with the paging subsystem first.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Since in-guest debug exceptions are now unconditionally trapped to Xen, adding
a hook for vm_event subscribers to tap into this new always-on guest event. We
rename along the way hvm_event_breakpoint_type to hvm_event_type to better
match the various events that can be passed with it. We also introduce the
necessary monitor_op domctl's to enable subscribing to the events.
This patch also provides monitor subscribers to int3 events proper access
to the instruction length necessary for accurate event-reinjection. Without
this subscribers manually have to evaluate if the int3 instruction has any
prefix attached which would change the instruction length.
Signed-off-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Previously, subscribing to MSR write events was an all-or-none
approach, with special cases for introspection MSR-s. This patch
allows the vm_event consumer to specify exactly what MSR-s it is
interested in, and as a side-effect gets rid of the
vmx_introspection_force_enabled_msrs[] special case.
The patch also introduces arch_monitor_init_domain() and
arch_monitor_cleanup_domain(), to do monitor-specific work
(as opposed to the previous way of doing all the setup in
vm_event_init_domain() / vm_event_cleanup_domain()).
This replaces the previously posted "xen: Filter out MSR write
events" patch.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Specifically:
s/\.xsplice/\.livepatch/
s/XSPLICE/LIVEPATCH/
s/xsplice/livepatch/
s/livepatch_patch_func/livepatch_func/
s/xSplice/Xen Live Patch/
s/livepatching/livepatch/
s/arch_livepatch_enter/arch_livepatch_quiesce/
s/arch_livepatch_exit/arch_livepatch_revive/
And then modify some of the function arguments
to have two more characters.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
The underlaying toolstack code to do the basic
operations when using the XEN_XSPLICE_op syscalls:
- upload the payload,
- get status of an payload,
- list all the payloads,
- apply, check, replace, and revert the payload.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
At the moment the only consumer of this structure is x86, but other arches
might also use it, so make all the fields 64bits. On x86 Xen will still try
to place everything below the 4GiB boundary, but that might not be feasible
in other arches.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Requested-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Later changes (Patch titled "tools/libxc: Use featuresets rather than
guesswork") will cause the cpuid generation logic to seed their
information from a featureset. This patch adds the infrastructure to
specify a featureset, and will obtain the appropriate defaults from Xen
if omitted.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This reverts commit 1aee836fe2.
This patch was nacked after commit. Jan writes:
And already applied as I see. I think rushing things in like this is
not a solution, no matter that we want to freeze the tree today.
Changes like this should be free to go in as de-facto bug fixes
after the freeze date.
At the moment the only consumer of this structure is x86, but other arches
might also use it, so make all the fields 64bits. On x86 Xen will still try
to place everything below the 4GiB boundary, but that might not be feasible
in other arches.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Requested-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
a. call callbacks resume/checkpoint/suspend while secondary vm
status is consistent with primary
b. send dirty pfn list to primary when checkpoint under colo
c. send store gfn and console gfn to xl before resuming secondary vm
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We will do the following things again and again:
1. Suspend primary vm
a. Suspend primary vm
b. do postsuspend
c. Read CHECKPOINT_SVM_SUSPENDED sent by secondary
2. Checkpoint
a. Write emulator xenstore data and emulator context
b. Write checkpoint end record
3. Resume primary vm
a. Read CHECKPOINT_SVM_READY from slave
b. Do presume
c. Resume primary vm
d. Read CHECKPOINT_SVM_RESUMED from slave
4. Wait a new checkpoint
a. Wait a new checkpoint(not implemented)
b. Send CHECKPOINT_NEW to slave
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Secondary vm is running in colo mode. So we will do
the following things again and again:
1. Resume secondary vm
a. Send CHECKPOINT_SVM_READY to master.
b. If it is not the first resume, call libxl__checkpoint_devices_preresume().
c. If it is the first resume(resume right after live migration),
- call libxl__xc_domain_restore_done() to build the secondary vm.
- enable secondary vm's logdirty.
- call libxl__domain_resume() to resume secondary vm.
- call libxl__checkpoint_devices_setup() to setup checkpoint devices.
d. Send CHECKPOINT_SVM_RESUMED to master.
2. Wait a new checkpoint
a. Call libxl__checkpoint_devices_commit().
b. Read CHECKPOINT_NEW from master.
3. Suspend secondary vm
a. Suspend secondary vm.
b. Call libxl__checkpoint_devices_postsuspend().
c. Send CHECKPOINT_SVM_SUSPENDED to master.
4. Checkpoint
a. Read emulator xenstore data and emulator context
b. REC_TYPE_CHECKPOINT_END
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In COLO mode, both VMs are running, and are considered in sync if the
visible network traffic is identical. After some time, they fall out of
sync.
At this point, the two VMs have definitely diverged. Lets call the
primary dirty bitmap set A, while the secondary dirty bitmap set B.
Sets A and B are different.
Under normal migration, the page data for set A will be sent from the
primary to the secondary.
However, the set difference B - A (the one in B but not in A, lets
call this C) is out-of-date on the secondary (with respect to the
primary) and will not be sent by the primary (to secondary), as it
was not memory dirtied by the primary. The secondary needs C page data
to reconstruct an exact copy of the primary at the checkpoint.
The secondary cannot calculate C as it doesn't know A. Instead, the
secondary must send B to the primary, at which point the primary
calculates the union of A and B (lets call this D) which is all the
pages dirtied by both the primary and the secondary, and sends all page
data covered by D.
In the general case, D is a superset of both A and B. Without the
backchannel dirty bitmap, a COLO checkpoint can't reconstruct a valid
copy of the primary.
We transfer the dirty bitmap on libxc side, so we need to introduce back
channel to libxc.
Note: it is different from the paper. We change the original design to
the current one, according to our following concerns:
1. The original design needs extra memory on Secondary host. When there's
multiple backups on one host, the memory cost is high.
2. The memory cache code will be another 1k+, it will make the review
more time consuming.
Note: this patch merely adds new parameters to various prototypes and
functions. The new parameters are used in later patch called
"libxc/restore: send dirty pfn list to primary when checkpoint under
COLO".
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Commit d275ec9c introduce ssize_t but not include relevant header,
it will cause compile errors just like below:
./include/xenctrl.h:1485: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'xc_version_len'
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
We change the xen_version libxc code to use the new hypercall.
Which of course means every user in the code base has to
be changed over.
It is important to note that the xc_version_op has a different
return semantic than the previous one. It returns negative
values on error (like the old one), but it also returns
an positive value on success (unlike the old one). The positive
value is the number of bytes copied in.
Note that both Ocaml and xenstat use tabs instead of four
spaces so they look quite odd.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com> [for the Ocaml stubs]
Acked-by: George Dunlap <george.dunlap@eu.citrix.com> [xenctx bits]
Acked-by: Wei Liu <wei.liu2@citrix.com>
xc_domain_save() and xc_domain_restore's parameter will use this type,
so it should be public.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
After some discussion around the new boot ABI consensus has been reached
about the layout and contents of the start info. The following patch updates
the layout to what has been agreed.
Also, the new layout is described in binary terms in order to avoid issues
with alignments when using C structs.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
xc_mem_access_enable_emulate() and xc_mem_access_disable_emulate()
are currently no-ops, that is all they do is set a flag that
nobody else checks. The user can already set the EMULATE flags in
the vm_event response if emulation is desired, and having an extra
check above that is not inherently safer, but it does complicate
(currenly unnecessarily) the API. This patch removes these
functions and the corresponding hypervisor code.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
c/s 2d2f789 "tools: rename libxc's evtchn_port_or_error_t with an xc_
prefix" doesn't cater for older applications which have requested
XC_WANT_COMPAT_EVTCHN_API
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently in ioreq server, guest write-protected ram pages are
tracked in the same rangeset with device mmio resources. Yet
unlike device mmio, which can be in big chunks, the guest write-
protected pages may be discrete ranges with 4K bytes each. This
patch uses a seperate rangeset for the guest ram pages.
To differentiate the ioreq type between the write-protected memory
ranges and the mmio ranges when selecting an ioreq server, the p2m
type is retrieved by calling get_page_from_gfn(). And we do not
need to worry about the p2m type change during the ioreq selection
process.
Note: Previously, a new hypercall or subop was suggested to map
write-protected pages into ioreq server. However, it turned out
handler of this new hypercall would be almost the same with the
existing pair - HVMOP_[un]map_io_range_to_ioreq_server, and there's
already a type parameter in this hypercall. So no new hypercall
defined, only a new type is introduced.
Signed-off-by: Shuai Ruan <shuai.ruan@linux.intel.com>
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Similar to the previous xentoollog case this is not allowed. Switch to
a forward decl of the struct and use of it in the APIs.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This is used only for xc_evtchn_alloc_unbound and the legacy/compat
versions of the old interfaces and avoids redefining the typedef. The
evtchn_port_or_error_t name is now used only be libxenevtchn.
None of the callers of xc_evtchn_alloc_unbound use the type
themselves.
NB xc_evtchn_alloc_unbound differs from xc_evtchn_bind_unbound_port
and the underlying xenevtchn_bind_unbound_port in that it allows the
specification of the local domain rather than assuming self. This is
only useful during domain build.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxenforeignmemory will provide a stable API and ABI for mapping
foreign domain memory (subject to appropriate privileges).
The new library exposes an interface equivalent to
xc_map_foreign_memory_bulk, which all the other
xc_map_foreign_memory_* functions (which remain in libxc) are
implemented in terms of.
Upon request (via #define XC_WANT_COMPAT_MAP_FOREIGN_API) libxenctrl
will provide a compat API for the old names. This is used by qemu-xen
and qemu-trad as well as various in tree things (which required
de-dupping various #includes in some too to get the #define before the
first).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
It can trivially be replaced by xc_map_foreign_pages which is the
interface I want to move to going forward (by standardising on _bulk
but handling err=NULL as _pages does).
The callers of _batch are checking a mixture of a NULL return or
looking to see if the top nibble of the (usually sole) mfn they pass
has been modified to be non-zero to detect errors. _pages never
modifies the mfn it was given (it's const) and returns NULL on
failure, so adjust the error handling where necessary. Some callers
use a copy of the mfn array, for reuse on failure with _batch, which
is no longer necessary as _pages doesn't modify the array, however I
haven't cleaned that up here.
This reduces the twist maze of xc_map_foreign_* by one, which will be
useful when trying to come up with an underlying stable interface.
NetBSD and Solaris implemented xc_map_foreign_bulk in terms of
xc_map_foreign_batch via a compat layer, so xc_map_foreign_batch
becomes an internal osdep for them.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
The alternative backend (a xen-api/xapi shim) is no longer around and
so this stuff is now just baggage which is getting in the way of
refactoring libxenctrl.
Nested virt probably suffices for this use case now.
This was the last component of the osdep infrastructure, so all the
dynamic loading etc stuff all falls away too.
As part of this I was forced to investigate the twisty
xc_map_foreign_* maze, which I have added to the
toolstack-library-apis doc in the hopes of doing something sensible.
NetBSD and Solaris now call xc_map_foreign_bulk_compat directly from
their xc_map_foreign_bulk, which could have been achieved by using
some ifdefs around a renamed function. This will fall out in the wash
when these functions move to their own library.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: David Scott <dave.scott@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
libxengnttab will provide a stable API and ABI for accessing the
grant table devices.
The functions are moved into the xengnt{tab,shr} namespace to make a
clean break from libxc and avoid ambiguity regarding which interfaces
are stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_GNTTAB_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few grant table related functions which go via privcmd
(GNTTABOP) rather than ioctls on the /dev/xen/gnt* devices in
libxenctrl. Specifically:
- xc_gnttab_get_version
- xc_gnttab_map_table_v1
- xc_gnttab_map_table_v2
- xc_gnttab_op
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
After this change libxenvchan no longer needs to link against
libxenctrl. It still needs xenctrl.h in one file for xen_mb and
friends.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
The alternative backend (a xen-api/xapi shim) is no longer around and
so this stuff is now just baggage which is getting in the way of
refactoring libxenctrl.
Nested virt probably suffices for this use case now.
It is now necessary to provide explicit versions of things for
platforms which do not implement this functionality, since the osdep
dispatcher cannot fulfil this need any more. These are provided by
appropriate xc_nognt???.c files which are compiled and linked on the
appropriate platforms. In them open and close return failure and
everything else aborts, since if open fails they should never be
called.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
libxenevtchn will provide a stable API and ABI for accessing the
evtchn device.
The functions are moved into the xenevtchn namespace to make a clean
break from libxc and avoid ambiguity regarding which interfaces are
stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_EVTCHN_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few event channel related functions which go via privcmd
(EVTCHNOP) rather than ioctls on the /dev/xen/evtchn device in
libxenctrl. Specifically:
- xc_evtchn_alloc_unbound
- xc_evtchn_reset
- xc_evtchn_status
Note that xc_evtchn_alloc_unbound's functionality is also provided by
xenevtchn_bind_unbound_port() (née xc_evtchn_bind_unbound_port) and is
probably redundant.
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels. QEMU does use these in hw/xenpv/xen_domainbuild.c but
that is a "toolstack use".
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
The alternative backend (a xen-api/xapi shim) is no longer around and
so this stuff is now just baggage which is getting in the way of
refactoring libxenctrl.
Note that the intention is to move this into a separate library
shortly.
Nested virt probably suffices for this use case now.
One incorrect instance of using xc_interface where xc_evtchn (in ocaml
stubs) is removed, this used to work because they were typedefs to the
same struct, but is no longer permitted.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
With commit 8c45adec18 ("libxc: create unmapped initrd in domain
builder if supported") location of ramdisk may not be available to
HVMlite guests by the time alloc_magic_pages_hvm() is invoked if the
guest supports unmapped initrd.
So let's move ramdisk info initialization (along with a few other
operations that are not directly related to allocating magic/special
pages) from alloc_magic_pages_hvm() to bootlate_hvm().
Since we now split allocation and mapping of the start_info segment
let's stash it, along with cmdline length, in xc_dom_image so that we
can check whether we are mapping correctly-sized range.
We can also stop using xc_dom_image.start_info_pfn and leave it for
PV(H) guests only.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Support the xenstore domain flag for obtaining domain info.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In attempting to disaggregate libxenctrl I found that many of the
pieces were going to want access to this library, so split it out (as
it probably should always have been).
Various build adjustments are needed. In particular things which use
xtl_* themselves now need to explicity link against the library.
This has a nice side effect which is that users of libxl no longer
need to link against libxenctrl just to create a logger, which was
counter to the principal that applications using libxl shouldn't be
required to look behind the curtain. This means that xl no longer
links against libxenctrl.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- dropped QEMU_TRADITIONAL_REVISION update, this had since
progressed to 569eac99e8dd which is after 9fad9ed28583, the
commit needed here. ]
Replace the firmware loaded into HVM guests with an OS kernel. Since the HVM
builder now uses the PV xc_dom_* set of functions this kernel will be parsed
and loaded inside the guest like on PV, but the container is a pure HVM
guest.
Also, if device_model_version is set to none or a device model for the
specified domain is not present unconditinally set the nic type to
LIBXL_NIC_TYPE_VIF.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Introduce a new flag in xc_dom_image that turns on and off the emulated
devices. This prevents creating the VGA hole, the hvm_info page and the
ioreq server pages. libxl unconditionally sets it to true for all HVM
domains at the moment.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This reverts commit c7d3afbb44 which
broke the libvirt build, since libvirt uses xtl_* and hence needs
updating to link against the new library when necessary.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
In attempting to disaggregate libxenctrl I found that many of the
pieces were going to want access to this library, so split it out (as
it probably should always have been).
Various build adjustments are needed. In particular things which use
xtl_* themselves now need to explicity link against the library.
This has a nice side effect which is that users of libxl no longer
need to link against libxenctrl just to create a logger, which was
counter to the principal that applications using libxl shouldn't be
required to look behind the curtain. This means that xl no longer
links against libxenctrl.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- Update QEMU_TRADITIONAL_REVISION and MINIOS_UPSTREAM_REVISION ]
Anthony PERARD
Juergen Gross
Tamas K Lengyel
Andrew Cooper
Tamas K Lengyel
Razvan Cojocaru
Konrad Rzeszutek Wilk
Roger Pau Monne
Ian Jackson
Chong Li
Wei Liu
Olaf Hering
Wen Congyang
Changlong Xie
Jan Beulich
Shuai Ruan
Ian Campbell
Boris Ostrovsky