attached patch lets python install the modules into
DESTDIR/PREFIX as before, but lets python search
the modules in PREFIX rather DESTDIR/PREFIX.
This prevents failures about not finding python modules
after files have been installed into PREFIX.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
xenwatch thread _storeChanged() may create /local/domain/<domid>
entries in xenstore even after the domain has shutdown.
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
This patch adds the ACPI fixed hardware power button for HVM.
It enables a graceful shutdown of a guest OS by direction of Dom0.
(if a proper action for the power button is set inside the guest)
usage:
xm trigger <Domain> power
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
The rtc_timeoffset parameter in VM config is ignored when
localtime=1. Also it is not preserved across reboot.
NOTE:
This patch changes the meaning of the xenstore
/vm/<uuid>/rtc/timeoffset
from utc offset to local offset. (it's OK for the ioemu)
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
I've found some problems when running 2 guests with and then trying
to install a new machine (no matter whether using virt-manager or
virt-install).
Signed-off-by: Michal Novotny <minovotn@redhat.com>
We need to close the socket on the child side when xend creates a
child process such as qemu-dm.
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
This patch allows hvm domain to have multiple serial ports
with serial =3D [ '...', '...'].
The old style, serial=3D'option string', is also accepted for
compatibility.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Shutting down a hvm, xend-debug.log always shows:
Unhandled exception in thread started by=20
Traceback (most recent call last):
File "//usr/lib64/python/xen/xend/image.py", line 549, in
_sentinel_watch
self._dmfailed(message)
File "//usr/lib64/python/xen/xend/image.py", line 491, in _dmfailed
xc.domain_shutdown(self.vm.getDomid(), DOMAIN_CRASH)
xen.lowlevel.xc.Error: (3, 'No such process')
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
The current parser only accepts vslots 0 - f (hex), that is, only
slots that have one digit. This is an omission as two digit slots
with a leading 0 or 1 are also valid, representing the
full range of slots 0 - 1f.
Thanks to Dexuan Cui for spotting this problem.
Cc: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
I started a VM by using xm create, then I checked values of VDI
records and values of VBD records. When I gave the following disk
modes to a disk parameter, I got the following values from the records.
"r" "w" "w!"
VDI:read_only True True True <-- Always True!
VDI:sharable True True True <-- Always True!
VBD:mode RO RW RO
^^ <-- It should be RW.
This patch fixes the values of the records as follows.
"r" "w" "w!"
VDI:read_only True False False
VDI:sharable False False True
VBD:mode RO RW RW
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
For integrated devices(with bus number 0), self.find_parent() returns
None, causing a python exception here.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
The current implementation of 'xm pci-list-assignable-devices' command
has a problem that it directly invokes hypercall using
xen.lowlevel.xc.
This is probably based on an assumption that the command is executed
on the host itself, but in fact there are cases xm commands can be
executed on a remote server through xmlrpc.
So this patch makes the xm command just inquire of xend about the
information of available devices.
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
pvSCSI allocations fail if the version of udev in a host OS is
relatively new. I have not been able to detect the failure because
I have used udev of the version 095. The failure occurs by
an incompatibility problem of scsi_id command included udev.
This patch tackles the incompatibility problem.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
In 19284:0942BAA2A088 provision was made for running vnc and sdl
simultaneously. However, arrangements for saving and restoring the
new structure-configuration, and arrangements for allowing the new
code to load old savefiles, were not made.
This patch adds these facilities. Amongst other things, HVM VNC
save/restore will now work properly again.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
When the guest(pv-on-hvm guest that cannot suspend) reboot in
LiveMigration, the disconnecting of src-side is not transmitted to
dist-side. As a result, the error processing on the dist side is not
executed.
Signed-off-by: Tomonari Horikoshi <t.horikoshi@jp.fujitsu.com>
Currently a slot may be specified for a hot-plug device,
but not for a pass-through device that is inserted at boot time.
This patch adds support for the latter.
The syntax is:
BUS:DEV.FUNC[@VSLOT]
e.g: 0000:00:1d:0@7
This may be important as recent changes that allow any free PCI
slot to be used for pass-through (and hotplug) may case pass-through
devices to be assigned in different locations to before. Amongst
other things, specifying the slot will allow users to move them
back, if there is a need.
Signed-off-by: Simon Horman <horms@verge.net.au>
When XenAPI is available, xm scsi-attach fails. Also xm new and
xm create fail if a vscsi parameter is defined into domain
configuration files.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
If domU frame buffer configuration has no vnclisten attribute set, use
the global vnc-listen address specified in xend configuration file
when updating vfb location. Currently the hardcoded value 'localhost'
is used.
Signed-off-by: Jim Fehlig <jfehlig@novell.com>
When XenAPI is available, xm new and xm create fail.
# xm new vm1
Using config file "/etc/xen/vm1".
Attribute 's3_integrity' not declared
# xm create vm1
Using config file "/etc/xen/vm1".
Attribute 's3_integrity' not declared
This patch adds an s3_integrity into create.dtd.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Rather than use "0x0" to signify that the hotplug slot should
be automatically selected by qemu-dm, define AUTO_PHP_SLOT_STR.
At the same time, change the magic value form 0x0 to 0xff,
in line with changes made to qemu-dm to allow any unused PCI
device to be used for hotplug.
Signed-off-by: Simon Horman <horms@verge.net.au>
When a udev event is received, udevevent.py parses the udev data and
tells XendNode.py to update the physical resource information.
This patch also add a boolean parameter 'xend-udev-event-server', to
let users indicate whether we should enable this function or not.
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
Add __classes_lock to protect __classes, since it can be modified by
the udev listener thread.
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
Introduce SocketDgramListener and UnixDgramListener classes.
We already have STREAM (connection) type socket listener classes in
the source tree, but we need DGRAM (connectionless) type listeners to
receive udev events.
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
In the case of a host OS without lsscsi command, xm scsi-attach
command fails even if you specify existing SCSI device.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
This patch moves a call processing of a domain reset processing
from xm to xend. Also, it adds a reset argument to do_dump() of
SrvDomain.py.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
This patch adds support for specifying the backend (tapdisk or ioemu)
to blktapctrl. Images can be specified e.g. as tap:tapdisk:aio,
tap:ioemu:qcow2 or tap:vmdk. When omitting the backend, a default is
chosen based on the image type (currently always tapdisk because ioemu
as a backend is broken until a follow-up patch series against qemu-xen
is applied)
Signed-off-by: Kevin Wolf <kwolf@suse.de>
attached patch fixes a regression in c/s 19330 which
prevents to start guests on a Linux Dom0.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
This is a corrected version of a patch commited as c/s 19250 and
reverted by c/s 19314. Thanks to "trap sigerr ERR" in
xen-hotplug-common.sh the xen-hotplug-cleanup would exit when reading
/local/domain/ID/vm fails thus skipping all the xenstore-rm lines in
the rest of the script.
Change deviceDestroy behavior to remove /vm/UUID/device/...
path only when force was used (as it already does so for both frontend
and backend) and do the removing from xen-hotplug-cleanup script when
we are sure the device is really not attached to the guest any more.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch prevents xend from creating a XendNetwork instance of
tmpbridge (a temporary bridge used in network-bridge script).
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
Keir Fraser