In COLO mode, both VMs are running, and are considered in sync if the
visible network traffic is identical. After some time, they fall out of
sync.
At this point, the two VMs have definitely diverged. Lets call the
primary dirty bitmap set A, while the secondary dirty bitmap set B.
Sets A and B are different.
Under normal migration, the page data for set A will be sent from the
primary to the secondary.
However, the set difference B - A (the one in B but not in A, lets
call this C) is out-of-date on the secondary (with respect to the
primary) and will not be sent by the primary (to secondary), as it
was not memory dirtied by the primary. The secondary needs C page data
to reconstruct an exact copy of the primary at the checkpoint.
The secondary cannot calculate C as it doesn't know A. Instead, the
secondary must send B to the primary, at which point the primary
calculates the union of A and B (lets call this D) which is all the
pages dirtied by both the primary and the secondary, and sends all page
data covered by D.
In the general case, D is a superset of both A and B. Without the
backchannel dirty bitmap, a COLO checkpoint can't reconstruct a valid
copy of the primary.
We transfer the dirty bitmap on libxc side, so we need to introduce back
channel to libxc.
Note: it is different from the paper. We change the original design to
the current one, according to our following concerns:
1. The original design needs extra memory on Secondary host. When there's
multiple backups on one host, the memory cost is high.
2. The memory cache code will be another 1k+, it will make the review
more time consuming.
Note: this patch merely adds new parameters to various prototypes and
functions. The new parameters are used in later patch called
"libxc/restore: send dirty pfn list to primary when checkpoint under
COLO".
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In COLO mode, secondary needs to send the following data to primary:
1. In libxl
Secondary sends the following CHECKPOINT_CONTEXT to primary:
CHECKPOINT_SVM_SUSPENDED, CHECKPOINT_SVM_READY and CHECKPOINT_SVM_RESUMED
2. In libxc
Secondary sends the dirty pfn list to primary
But the io_fd only can be written in primary, and only can be read in
secondary. Save recv_fd in domain_suspend_state, and send_fd in
domain_create_state. Extend libxl_domain_create_restore API, add a
send_fd param to it. Add LIBXL_HAVE_CREATE_RESTORE_SEND_FD to indicate
the API change.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Secondary vm is running in COLO mode, we need to send secondary
vm's dirty page information to primary host at checkpoint, so we
have to enable qemu logdirty on secondary.
libxl__domain_suspend_common_switch_qemu_logdirty() is to enable
qemu logdirty. But it uses libxl__domain_save_state, and calls
libxl__xc_domain_saverestore_async_callback_done() before exits.
This can not be used for secondary vm.
Update libxl__domain_suspend_common_switch_qemu_logdirty() to
introduce a new API libxl__domain_common_switch_qemu_logdirty().
This API only uses libxl__logdirty_switch, and calls
lds->callback before exits. This new API will be used by the patch:
secondary vm suspend/resume/checkpoint codes
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In normal migration, the qemu state is passed to qemu as a parameter.
With COLO, secondary vm is running. So we will do the following steps
at every checkpoint:
1. suspend both primary vm and secondary vm
2. sync the state
3. resume both primary vm and secondary vm
Primary will send qemu's state in step2, and secondary's qemu should
read it and restore the state before it is resumed. We can not pass the
state to qemu as a parameter because secondary QEMU is already started
at this point, so we introduce libxl__qmp_restore() to do it.
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Commit d275ec9c introduce ssize_t but not include relevant header,
it will cause compile errors just like below:
./include/xenctrl.h:1485: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'xc_version_len'
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
We change the xen_version libxc code to use the new hypercall.
Which of course means every user in the code base has to
be changed over.
It is important to note that the xc_version_op has a different
return semantic than the previous one. It returns negative
values on error (like the old one), but it also returns
an positive value on success (unlike the old one). The positive
value is the number of bytes copied in.
Note that both Ocaml and xenstat use tabs instead of four
spaces so they look quite odd.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com> [for the Ocaml stubs]
Acked-by: George Dunlap <george.dunlap@eu.citrix.com> [xenctx bits]
Acked-by: Wei Liu <wei.liu2@citrix.com>
This hypercall mirrors the XENVER_ in that it has similar functionality.
However it is designed differently:
- No compat layer. The data structures are the same size on 32
as on 64-bit.
- The hypercall accepts three arguments - the command, pointer to
an buffer, and the length of the buffer.
- Each sub-ops can be "probed" for size by returning the size of
buffer that will be needed - if the buffer is NULL.
- Subops can complete even if the buffer is too small - truncated
data will be filled and hypercall will return -ENOBUFS.
- VERSION_commandline, VERSION_changeset are privileged.
- There is no XENVER_compile_info equivalent.
- The hypercall can return -EPERM and toolstack/OSes are expected
to deal with. However there are three subops: XEN_VERSION_version,
XEN_VERSION_platform_parameters and XEN_VERSION_get_features
that will always return an value as guests cannot survive without them.
While we combine some of the common code between XENVER_ and VERSION_
take the liberty of moving pae_extended_cr3 in x86 area.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> [XSM bits]
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Commit 363ae55c8 used an OCaml feature called record field punning. This broke
the build on compilers prior to OCaml 3.12.0.
This patch makes no semantic change but now uses backwards-compatible syntax.
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
* 'pin' of https://github.com/jgross1/xen:
libxl: add force option for xl vcpu-pin
libxl: print message how to recover from xl cpupool-cpu-remove errors
libxc: do some retries in xc_cpupool_removecpu() for EBUSY case
All patches have Acked-by and Reviewed-by tags.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Commit 78c5f59e "x86/hvm/viridian: save APIC assist vector" changed
the name of a field in the viridian vcpu save record. Unfortunately this
record has a decode function in xen-hvmctx and so it no longer builds.
This patch fixes the field name in xen-hvmctx and also adds a decode of
the additional field that was added to the save record.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
There should be 6 instead of 7 arguments now for tmem_control()
. which was done in commit 54a51b1766
"tmem: Remove xc_tmem_control mystical arg3" which missed
this change.
Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This makes xl more useful in scripts.
The strange thing about this is that the internal cd_insert function
*already* returned something appropriate, and cd-eject was using it,
but cd-insert wasn't.
Also:
* Rework cd_insert to return EXIT_FAILURE and EXIT_SUCCESS rather than
magic constants
* Use 'r' for non-libxl return code, as specified in CODING_STYLE
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Also move the rc -> shell code translation into set_memory_max() to
make the two functions consistent with each other, and with other
similar examples in xl_cmdimpl.c
Change a 'long long' to "int64_t" while we're at it.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
There's no obvious reason for the call to xc_domain_getinfolist -- all
it seems to be doing is checking that the domain exists; but if it
doesn't exist, it will have already failed by this point.
NB that this will change the return value for libxl_set_memory_target:
now it will return 0 on success, rather than returning 1 (which was
the previous behavior). This is more in line with expected behavior,
and also allows the caller to distingiush between success and other
failure modes (some of which also return 1).
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
An error occurring when calling "xl cpupool-cpu-remove" might leave
the system in a state where a cpu is neither completely free nor in
a cpupool. This can easily be repaired by adding the cpu via
"xl cpupool-cpu-add" to the cpupool where it was removed from before.
Print a message telling this the user in case of an error.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 6ef823fd added '-nodefaults' to the qemu args created by
libxl, which is a good step in restricting qemu's default
configuration. This change takes another step by adding
-no-user-config, which ignores any user-provided config files in
sysconfdir. Together, -nodefaults and -no-user-config allow Xen
to avoid unkown and uncontrolled qemu configuration.
Both options are also added to the qemu invocation in the
xen-qemu-dom0-disk-backend systemd service file.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The existing transaction merge algorithm keeps track of the least upper bound
(longest common prefix) of all the nodes which have been read and written, and
will re-combine two stores which have disjoint upper bounds. This works well for
small transactions but causes unnecessary conflicts for ones that span a large
subtree, such as the following ones used by the xapi toolstack:
* VM start: creates /vm/... /vss/... /local/domain/...
The least upper bound of this transaction is / and so all
these transactions conflict with everything.
* Device hotplug: creates /local/domain/0/... /local/domain/n/...
The least upper bound of this transaction is /local/domain so
all these transactions conflict with each other.
If the existing merge algorithm cannot merge and commit, we attempt
a /replay/ of the failed transaction against the new store.
When we replay the requests we check whether the response sent to the client is
the same as during the first attempt at the transaction. If the responses are
all the same then the transaction replay can be committed. If any differ then
the transaction replay must be aborted and the client must retry.
This algorithm uses the intuition that the transactions made by the toolstack
are designed to be for separate domains, and should fundamentally not conflict
in the sense that they don't read or write any shared keys. By replaying the
transaction on the server side we do what the client would have to do anyway,
only we can do it quickly without allowing any other requests to interfere.
Performing 300 parallel simulated VM start and shutdowns without this code:
300 parallel starts and shutdowns: 268.92
Performing 300 parallel simulated VM start and shutdowns with this code:
300 parallel starts and shutdowns: 3.80
Signed-off-by: Dave Scott <dave@recoil.org>
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jon Ludlam <jonathan.ludlam@citrix.com>
Reviewed-by: Euan Harris <euan.harris@citrix.com>
Acked-by: David Scott <dave@recoil.org>
Separate the functions which process operations that can be done as part of a
transaction. Specifically, these operations are: read, write, rm, getperms,
setperms, getdomainpath, directory, mkdir.
Also split function_of_type into two functions: one for processing the simple
operations and one for processing the rest.
This will help allow replay of transactions, allowing us to invoke the functions
that process the simple operations as part of the processing of transaction_end.
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jon Ludlam <jonathan.ludlam@citrix.com>
Reviewed-by: Euan Harris <euan.harris@citrix.com>
Acked-by: David Scott <dave@recoil.org>
A list of (request, response) pairs from the operations performed within the
transaction will be useful to support transaction replay.
Since this consumes memory, the number of requests per transaction must not be
left unbounded. Hence a new quota for this is introduced. This quota, configured
via the configuration key 'quota-maxrequests', limits the size of transactions
initiated by domUs.
After the maximum number of requests has been exhausted, any further requests
will result in EQUOTA errors. The client may then choose to end the transaction;
a successful commit will result in the retention of only the prior requests.
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jon Ludlam <jonathan.ludlam@citrix.com>
Reviewed-by: Euan Harris <euan.harris@citrix.com>
Acked-by: David Scott <dave@recoil.org>
Previously, the functions reply_{ack,data,data_or_ack} and input_handle_error
put the response on the wire by invoking Connection.send_{ack,reply,error}.
Instead, these functions now return a value indicating what needs to be put on
the wire, and that action is done by a send_response function called
afterwards.
This refactoring gives us a chance to store the value of the response, useful
for replaying transactions.
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jon Ludlam <jonathan.ludlam@citrix.com>
Reviewed-by: Euan Harris <euan.harris@citrix.com>
Acked-by: David Scott <dave@recoil.org>
The help message did not include information about the --type parameter.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Most of XENVER_* have now an XSM check for their sub-ops.
The subop for XENVER_commandline is now a priviliged operation.
To not break guests we still return an string - but it is
just '<denied>\0'.
The XENVER_[version|platform_parameters|get_features] - will
always return an value to the guest.
The rest: XENVER_[extraversion|capabilities|page_size|
guest_handle|changeset| compile_info] behave as before -
allowed by default for all guests if using the XSM default
policy or with the dummy one. And if the system admin
wants to curtail access to some of them - they can do
that now with a non-default XSM policy.
Also we add a local variable block.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
---
Cc: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
v2: Do XSM check for all the XENVER_ ops.
- Add empty data conditions.
- Return <denied> for priv subops.
- Move extraversion from priv to normal. Drop the XSM check
for the non-priv subops.
v3:
- Add +1 for strlen(xen_deny()) to include NULL. Move changeset,
compile_info to non-priv subops.
- Remove the \0 on xen_deny()
- Add new XSM domain for xenver hypercall. Add all subops to it.
- Remove the extra line, Add Ack from Daniel
v4:
- Rename the XSM from xen_version_op to xsm_xen_version.
Prefix the types with 'xen' to distinguish it from another
hypercall performing similar operation. Removed Ack from Daniel
as it was so large. Add local variable block.
v5:
- Make XENVER_platform_parameters,get_features,version be excluded
from the XSM check per Jans' review. Add BUILD_BUG_CHECK and fix
odd line removals. Remove stray changes and fix spelling.
This patch adds code to enable the APIC assist enlightenment which,
under certain conditions, means that the guest can avoid an EOI of
the local APIC and thereby avoid a VMEXIT.
Use of the enlightenment by the hypervisor is under control of the
toolstack, and is added to the default set.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add pvusb commands: usbctrl-attach, usbctrl-detach, usb-list,
usbdev-attach and usbdev-detach.
To attach a usb device to guest through pvusb, one could follow
following example:
#xl usbctrl-attach test_vm version=1 ports=8
#xl usb-list test_vm
will show the usb controllers and port usage under the domain.
#xl usbdev-attach test_vm hostbus=1 hostaddr=2
will find the first usable controller:port, and attach usb
device whose busnum is 1 and devnum is 6.
One could also specify which <controller> and which <port>.
#xl usbdev-detach test_vm 0 1
will detach USB device under controller 0 port 1.
#xl usbctrl-detach test_vm dev_id
will destroy the controller with specified dev_id. Dev_id
can be traced in usb-list info.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Simon Cao <caobosimon@gmail.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add code to support pvusb in domain config file. One could specify
usbctrl and usb in domain's configuration file and create domain,
then usb controllers will be created and usb device would be attached
to guest automatically.
One could specify usb controllers and usb devices in config file
like this:
usbctrl=['version=2,ports=4', 'version=1, ports=4', ]
usbdev=['hostbus=2, hostaddr=1, controller=0,port=1', ]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Simon Cao <caobosimon@gmail.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Add pvusb APIs, including:
- attach/detach (create/destroy) virtual usb controller.
- attach/detach usb device
- list usb controller and usb devices
- some other helper functions
Signed-off-by: Simon Cao <caobosimon@gmail.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
For some device type, device removal operation needs to be
handled specially, like usbctrl, it needs to remove all usb
devices under it first, then remove usbctrl. Extend
DEFINE_DEVICE_REMOVE to support generic and custom way
For those need to be handled specially, call
DEFINE_DEVICE_REMOVE_CUSTOM, it requires user defined
libxl__initiate_device_##type##_remove. Otherwise, just
call DEFINE_DEVICE_REMOVE as before.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add a new function libxl_read_sysfs_file_contents to handle sysfs file
specially. It would be used in later pvusb work.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
xc_domain_save() and xc_domain_restore's parameter will use this type,
so it should be public.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If the MMIO hole is large and hvmloader needs to relocate memory to
immediately above the 4 GiB boundary, the e820 presented to the guest
will not have a RAM region above 4 GiB.
e.g., a guest with 3 GiB of memory and a 2 GiB MMIO hole will only see
2 GiB.
The required e820 memory region above 4 GiB needs to be added, and not
just filled in.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Coverity points out that using LOG macro dereferences gc which is NULL
at that point. Use LIBXL__LOG instead.
CID: 1343291
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Commit 5644ce0142 ("x86emul: relax asm() constraints") introduced a
64-bit only instruction suffix, which breaks running the emulator test
on a 32-bit system. Mirror __OS (and _OP for completeness) to the test
wrapper source file.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Some versions of GCC complain that the 'firmware' variable can be used
uninitialized. It looks like the switch inside of the else case is just
confusing GCC.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The hunk that prints out error message can only be reached from the loop
that allocates memory. Move that hunk into the loop to avoid confusing
gcc.
Reported-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Roger Pau Monne <roger.pau@citrix.com>
The foreign header generation blindly replaces 'uint64_t' with '__align8__
uint64_t', to get correct alignment when built as 32bit. This is correct in
most circumstances, but Clang objects to two specific uses.
* Inside a sizeof() expression
* As part of a typecast
An example error looks like:
/local/xen.git/tools/libxc/../../tools/include/xen/foreign/x86_64.h:204:44:
error: 'aligned' attribute ignored when parsing type [-Werror,-Wignored-attributes]
__align8__ uint64_t evtchn_mask[sizeof(__align8__ uint64_t) * 8];
^~~~~~~~~~
/local/xen.git/tools/libxc/../../tools/include/xen/foreign/x86_64.h:13:36:
note: expanded from macro '__align8__'
^~~~~~~~~~~
This sedary is sufficient to fix all the bad examples without touching any of
the legitimate uses, and is more simple than teaching mkheader.py how to parse
C.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
hvmloader is unhosted, and shouldn't use the system errno.h. It already has
to use Xen's errno.h for other hypercalls. The use of public/io/xs_wire.h
requires the use of un-prefixed errno values.
This fixes the build on stricter toolchains where requesting -fno-builtin does
reduce the include path as much as it can.
Reported-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Wen Congyang
Changlong Xie
Konrad Rzeszutek Wilk
Jonathan Davies
Paul Durrant
Zhigang Wang
George Dunlap
Juergen Gross
Roger Pau Monne
Jim Fehlig
Doug Goldstein
Chunyan Liu
Razvan Cojocaru
David Vrabel
Wei Liu
Jan Beulich
Andrew Cooper
Dario Faggioli