Add a simple introduction to FLASK to the xl man page, at the beginning
of the FLASK chapter. Link to the xsm-flask.txt document.
Currently FLASK, TMEM and PCI PASS-THROUGH are defined as =head2 so they
look like sub-chapters of VIRTUAL DEVICE COMMANDS. Make them =head1.
Based on a text written by Daniel De Graaf.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This allow the caller to react as they think is appropriate. xl now prints a
message much like the library did previously, although hopefully somewhat more
informative.
Update the xl(1) man page to be similarly more informative.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Supports the xl subcommand sched-sedf.
The man page is only a minimal version (copy from xm man page without
examples). BTW: the xm man page seems not to be in sync with xm sched-sedf -h
regarding the time units. I used milliseconds in the xl implementation.
Only minimal semantical checks of parameters.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Supports the xl subcommand sched-credit2.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Adds cpupool awareness to output of xl sched-credit. Output can now be
restricted to a specific cpupool. The domains are printed for each cpupool
seperately.
The loop over cpupools and domains is seperated from the main command
implementation to be able to support other schedulers as well.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
The help text of xl sched-credit supported long options. Neither the man page
nor the implementation did.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Include hypercall documentation, fixing link generation for top level links to
use the INDEX.
Allow subsection links to be renamedi in the INDEX too.
Strip .txt suffixes as well as .html ones by moving the regex to the right
place instead of placing the literal text "(?:html|txt)" into the backlink to
the top level page. (oops)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add annotations for a couple of the hypercalls:
HYPERVISOR_set_trap_table
HYPERVISOR_mmu_update
We do this by
* annotating the list of #defines for hypercall numbers
* annotating the list of error values
* providing a function prototype for the systematically-named functions
The header generator does the rest.
This exercise revealed a couple of infelicities:
* In the actual source code, do_mmu_update is defined to return an int
and do_set_trap_table a long. However both functions return either
-Efoo (on error) or 0 for success.
* The error numbers are defined only in the private header file
xen/include/xen/errno.h and then only with names which will
typically clash with other projects. It would be nice to include a
public version of this header which defines XEN_E*. But for now
we run xen-headers on errno.h too.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
"xen-headers" generates HTML from header files. So far this generates
just some type cross-references, if you say
make -C docs html/hypercall/stamp
An index page, proper wiring into the build system, and a few more
annotations in the headers, and will be forthcoming.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
A browser will display them just fine.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
This is much more natural. Continue to support the old syntax in xl
but deprecate it.
[ Fixed up a long line in xl_cmdimpl.c. -iwj ]
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Taking over the top level "user" entry with a relatively obsolete document is a
bit of an annoyance but these docs are not so out of date that they should be
deleted. Move them out of the top-level instead.
(the original motivation here was to allow for user/xl-domain-cfg.markdown but
we have since decided to go with man/xl.cfg.pod.5 instead so perhaps this is a
waste of time)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
nb: I'm not a Perl wizard...
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
This document contains several 0xa0 characters (non-breaking spaces). These do
not display correctly in (some) terminals or when the document is rendered by (some)
browsers. Re-encode them as spaces.
I'm not confident that this change will make it through being encoded as a patch
and sent through email. Its effect can be replicated with:
perl -i -p -e 's/\xa0/ /g' docs/misc/sedf_scheduler_mini-HOWTO.txt
[ I ran the rune rather than trying to apply the patch -iwj ]
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add an enum at the libxl level with a hopefully descriptive set of names.
Deprecate the use of an integer in xl cfg files.
Signed-off-by: Ian Campbell
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Based on an initial version by Ian Jackson.
I believe that all keys are now present in the document although there are are
various omissions in the actual documentation of them. Hopefully however this
covers the majority of the most interesting keys.
Spice section:
Signed-off-by: Zhou Peng <zhoupeng@nfs.iscas.ac.cn>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
The rest:
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
I have confirmed that the relevant pages have been transitioned.
What remains is pages which have not yet been moved over:
$ rgrep xenwiki *
tools/libxen/README:http://wiki.xensource.com/xenwiki/XenApi
tools/xenballoon/xenballoond.README:http://wiki.xensource.com/xenwiki/Open_Topics_For_Discussion?action=AttachFile&do=get&target=Memory+Overcommit.pdf
Note that "PythonInXlConfig" never existed in the old wiki and does not exist
in the new. This reference was introduced by 22735:cb94dbe20f97 and was
supposed to have been written prior to the 4.1 release. I have transitioned it
anyway but it's not clear how valuable the message actually is. Perhaps we
should just remove that aspect of it?
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
I think these are better off deleted than remaining to confuse people.
docs/misc/blkif-drivers-explained.txt:
- Talks about Xen 2.0 beta, talks about the old pre-xenstored IPC mechanism.
docs/misc/cpuid-config-for-guest.txt:
- Doesn't really say anything, in particular doesn't actually describe how to
configure CPUID.
docs/misc/hg-cheatsheet.txt:
- Not out of date per-se wrt mercural but talk about Xen 2.0 and gives URLs
under www.cl.cam.ac.uk. Talks a lot about bitkeeper. Given that mercurial is
hardly unusual anymore I think there must be better guides out there so this
one is not worth resurecting.
docs/misc/network_setup.txt:
- This is more comprehensively documented on the wiki these days.
docs/misc/VMX_changes.txt:
- Is basically a changelog from the initial implementation of VMX in 2004.
I'm not sure about some of the other docs, but these ones seemed fairly
obvious.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Previously only some targets did this. An alternative would be to make a hard
dependency on these tools, this might make more sense especially for markdown?
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This is the initial version of an xl man page, based on the old xm man
page. Almost every command implemented in xl should be present, a
notable exception are the tmem commands that are currently missing.
Further improvements and clarifications to this man page are very
welcome.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Including markdown docs.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Stefano Stabellini
Daniel De Graaf
Ian Campbell
Ian Jackson
Juergen Gross