- Have the buid system generate a file which exports the install paths
for the hotplug scripts and stubdom / stubdom-dm
- Move file generation code from tools/python/Makefile into a gmake
macro
in Config.mk to avoid maintenance of three duplicates each with its
own
tweaks and bugs
- Export gmake variables into ioemu as shell variables
for upcoming ioemu patches
- Do above as a gmake macro to avoid maintenance of several duplicates
- Adjust hotplug scripts to find the right xen binaries from the
install directory
- Adjust stubdom-dm to use the install directories
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
The first start of a managed domain succeeds. But the second
start of the managed domain fails as follows. The problem occurs
when tapdisks are given to the managed domain. I think that the
problem occurs because the uname of tapdisks is overwritten with
"phy:/dev/xen/tadisk-2/tapdev*".
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Using changeset 19791:c0d2838fc10f, I can't create an HVM.
xend.log shows:
File "usr/lib64/python2.4/site-packages/xen/xend/image.py", line
759, in configure
store_dmargs.remove('-sdl')
ValueError: list.remove(x): x not in list
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
Reset BlktapController's device class back to 'tap' once the device
has been created. This fixes save/restore for VMs with blktap2 disks.
Signed-off-by: Ryan O'Connor <rjo@cs.ubc.ca>
Signed-off-by: Dutch Meyer <dmeyer@cs.ubc.ca>
This patch re-enables a useful blktap1 for users who disable blktap2.
Itremoves tapdisk and blktapctrl from blktap2, both of which cause
problems with blktap operation. In addition, this patch modifies xend
to check for blktap2 installation. If the blktap2 driver isn't
running (hopefully because the dom0 kernel option wasn't selected) we
fall back to blktap.
Signed-off-by: Dutch Meyer <dmeyer@cs.ubc.ca>
Add support for the qemu monitor in a stubdom, the same way the
emulated serial support was added few days ago. The stubdom exports
the monitor as a pty and minios opens a console frontend; qemu in dom0
provides the correspondent backend for this additional pv console that
happens to be the qemu monitor.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Using changeset 19783: 61ec78692b13, device assignment can't work:
e.g., in find_the_uppermost_pci_bridge(),
parent = dev_parent.find_parent()
...
dev_parent = PciDevice(parent),
we can see parent['domain'] is int and in PciDevice's __init__,
int(dev['domain'], 16) would fail:
TypeError: int() can't convert non-string with explicit base
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
There seems to be little need to use the domain, bus, slot and
function to look up the virtual slot to pass as the argument to
hvm_destroyPCIDevice(), only to have hvm_destroyPCIDevice() use the
virtual slot for the sole purpose of looking up the domain, bus, slot
and function.
Signed-off-by: Simon Horman <horms@verge.net.au>
Move dev_dict_to_sxp() into XendSXPDev.py. Move
pci_convert_dict_to_sxp() and pci_convert_sxp_to_dict() to pci.py,
where other similar functions live. This makes these functions
accessible outside of the XendConfig class.
Signed-off-by: Simon Horman <horms@verge.net.au>
Share some parsing code between different parts of xm.
This has the side-effect that the device specification for
hot-plug may now include the VSLOT and OPTS as per device
specifictions in the domain configuration file.
SEQ:BUS:DEV.FUNC[,OPT...]
e.g. 0000:00:01.00@6
Signed-off-by: Simon Horman <horms@verge.net.au>
sxp.merge() can't deal with values being a list so instead
of storing pci options as:
[ 'opts', [ 'key1' 'value1'], [ 'key2', 'value2'], ...]
store them as:
[ 'opts', [ 'key1' 'value1'], ['opts', [ 'key2', 'value2']], ...
Signed-off-by: Simon Horman <horms@verge.net.au>
As observed by Dexuan Cui, when PCI devices are passed through at
domain-creation-time setupOneDevice() will be called twice.
Once via setupDevice() and once via econfigureDevice() which
is called in pci_device_configure().
This patch removes the first of these.
Cc: Dexuan Cui <dexuan.cui@intel.com>
Cc: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
This patch adds a new command line argument to xenconsole to specify
to which console to connect to in case a domain has more than one.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Recently the format of the tap syntax in the config file changed to
using a 4 part specifier (tap:tapdisk:<format>:<filename>) instead
of the old 3-part one (tap:<qcow>:<filename>).
This breaks compatibility with existing config files: a guest start
will throw a Python exception and will be aborted.
AFAICS currently tap:tapdisk is redundant, so the attached patch
simply catches the above mentioned exception and tries to parse the
old format in this case.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
On some hosts:
[root@localhost ~]# ls /sys/bus/pci/devices/0000:00:05.0/
0000:00:05.0:pcie00 0000:05:00.0 class driver local_cpus
resource subsystem_vendor
0000:00:05.0:pcie01 broken_parity_status config enable modalias
subsystem uevent
0000:00:05.0:pcie02 bus device irq power
subsystem_device vendor
Here we should only get 0000:05:00.0, but we also get 0000:00:05.0
unexpectedly. With this patch, xend only extracts the exact BDF(s).
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
As observed by Mick Joran, if short-lived domain exits cleanly
then os.waitpid() will throw the following exception. This appears
to be because the child process that is used to start the domain
has detached from its parent.
OSError: [Errno 10] No child processes
Cc: Mick Jordan <Mick.Jordan@sun.com>
Signed-off-by: Simon Horman <horms@verge.ent.au>
Other than being arguably more human readable,
this patch reconciles the output differences between
using Xen API and xmlrpc to manipulate domains.
Signed-off-by: Simon Horman <horms@verge.net.au>
Using func for hotplug_slot is not correct, although func is often
zero, previously zero meant please pick a vslot and asking xend to
pick a vslot was the only method available.
This resolves the following error when using Xen API:
$ xm create hvm.conf
...
Internal error: Timed out waiting for device model action.
Signed-off-by: Simon Horman <horms@verge.net.au>
xm uses the following code to read pci information using Xen API:
ppci_ref =3D server.xenapi.DPCI.get_PPCI(dpci_ref)
ppci_record =3D server.xenapi.PPCI.get_record(ppci_ref)
dev =3D {
"domain": int(ppci_record["domain"]),
"bus": int(ppci_record["bus"]),
"slot": int(ppci_record["slot"]),
"func": int(ppci_record["func"]),
"vslot": int(server.xenapi.DPCI.get_hotplug_slot(dpci_ref))
}
As the domain, bus, slot and func values are returned as string
representations of decimal, it makes sense for get_hotplug_slot() to
also return string representations of decimal.
As it is, the int() conversion will break cause xm to fail with
an error if the vslot is in the range 0xa-0xf or 0x1a-0x1f.
$ xm pci-list debian
Error: Invalid argument.
And the int() conversion will return the wrong value if
the vslot is in the range 0x10-0x19.
This patch also alters XendDPCI to store hotplug_vslot as an integer
rather than a string. This is consitent with the way other
values are stored inside XendDPCI.
get_hotplug_slot() returning a string is not consistent
with other calls inside XendDPCI, which return integers.
Signed-off-by: Simon Horman <horms@verge.net.au>
I don't know of the historical reasons for this, but by convention
hex values are stored without a leading '0x' in the backend and
with a leading '0x' in the device configuration.
This patch also removes handling of the case where vslot is missing
from the backend, should never occur.
Signed-off-by: Simon Horman <horms@verge.net.au>
Internally xend doesn't know how to handle empty opts.
This code ensures that opts is only included in the sxpr
if its value will be non-empty.
Signed-off-by: Simon Horman <horms@verge.net.au>
* Install create.dtd in SHAREDIR
* Use SHAREDIR/create.dtd
* import os.path.join into xenapi_create.py,
it already seems to be used many times
Resolves the following error when using XenAPI:
$ xm create hvm.conf
Couldn't open resource '/usr/share/xen/create.dtd' at
/usr/share/xen/create.dtd:1:0
Signed-off-by: Simon Horman <horms@verge.net.au>
This patch fixes the "file object has no attribute find" failure
we've been seeing when starting blktap2 devices and adds more
meaningful error output to conditions where the tapdisk2 process is
unable to create a blktap2 device.
Signed-off-by: Dutch Meyer <dmeyer@cs.ubc.ca>
1) fix some small typos in util/pci.py;
2) find_all_the_multi_functions(): BDFs of a multi-function PCIe
device could be different in all the 3 fields (bus, device, function),
so we need self.find_parent() and list all t
he BDFs below the parent;
3) to assign a device of the must-be-co-assigned devices, we require
all the related devices should be owned by pciback;
4) detect and disallow duplicate pci string specified in guest config
file due to carelessness.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Keir Fraser