This is because libxl uses XEN_RUN_DIR to generate the socket path for
libxenstat while libxenstat itself uses hard-coded path, which is not
necessarily the same path as XEN_RUN_DIR. The default configuration
happened to work because XEN_RUN_DIR defaulted to /var/run/xen, which
matched the hard-coded path.
We should make libxenstat use XEN_RUN_DIR so that it works with
non-default configuration.
Generate a _paths.h because it is required to make this change work.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Clang points out that this is tautological.
src/xenstat.c:325:8: warning: comparison of 0 <= unsigned expression is
always true [-Wtautological-compare]
if (0 <= index && index < node->num_domains)
~ ^ ~~~~~
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
xentop will segmentation fault in this case:
# ip link set eth1 down
# ip link set eth1 name ETH
# xentop
This patch will let xentop to handle all uppercase network interface name.
Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
We change the xen_version libxc code to use the new hypercall.
Which of course means every user in the code base has to
be changed over.
It is important to note that the xc_version_op has a different
return semantic than the previous one. It returns negative
values on error (like the old one), but it also returns
an positive value on success (unlike the old one). The positive
value is the number of bytes copied in.
Note that both Ocaml and xenstat use tabs instead of four
spaces so they look quite odd.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com> [for the Ocaml stubs]
Acked-by: George Dunlap <george.dunlap@eu.citrix.com> [xenctx bits]
Acked-by: Wei Liu <wei.liu2@citrix.com>
get_domain_ids() in libxenstat used by read_attributes_qdisk() is
limited to 1024 domains. Remove that limit.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The operations are to be used by an control domain to set parameters,
list pools, clients, and to be used during migration.
There is no need to have them in the tmem hypercall path.
This patch moves code without adding fixes - and in fact in
some cases makes the parameters soo long that they hurt eyes - but
that is for another patch.
Note that in regards to existing users:
- Only the control domain could call it - which meant that if
a guest called it would get -EPERM, so we are OK there.
In practice no guests called this TMEM_CONTROL command.
- The spec: https://oss.oracle.com/projects/tmem/dist/documentation/api/tmemspec-v001.pdf
mentions: "TBD [Not sure if this is really needed.]"
which is a carte blanche as any to do this!
Note: The XSM check is the same - we just move it from do_tmem_op
to do_sysctl.
We also add an 32-bit pad to make the sysctl structure have the same
exact size under 32 and 64-bit toolstacks and not worry about aligment
issues.
And the XLAT does not need to deal with the buf as it has been
moved to another structure which is 32/64 fixed.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Jen Beulich <jbeulich@suse.com>
It mentions it but it is never used. The hypercall interface
knows nothing of this sort of thing either. Lets just remove it.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com> [release + toolstack]
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
And transform to POD to match our other manpages.
The content is identical, although the layout differs slightly with
certain indentation.
In addition, adjust the MAN{1,5}SRC-y `find` runes to be more general.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Instead switch to an explicit -include $(XEN_ROOT)/tools/config.h to
pickup config.h.
Most places already do this, fixup the rest.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
binutils 2.22 changed ld default from --copy-dt-needed-entries
to -no-copy-dt-needed-entries. This revealed that some objects
are linked implicitly with libtinfo and newer ld fails to build
relevant executables.
Below is short explanation why we should not do that...
http://fedoraproject.org/wiki/UnderstandingDSOLinkChange says:
The default behaviour for ld (my note: before version 2.22) allows
users to 'indirectly' link to required objects/libraries through
intermediate objects/libraries. While this is convenient, it can
also be dangerous because it makes your program's dependencies tied
to the dependencies of other objects. If those objects ever change
their linkages, they can break your program without any changes
to your own code!
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Now that Xen uses qdisks by default and qemu does not write out
statistics to sysfs this patch queries the QMP for disk statistics.
This patch depends on libyajl for parsing statistics returned from
QMP. The runtime requires libyajl 2.0.3 or newer for required bug
fixes in yajl_tree_parse().
Libxl is modified to create a new socket dedicated for the use of
libxenstat for querying the block statistics using QMP.
The current APIs remain unchanged. It works within the existing
framework of libxenstat.
Signed-off-by: Charles Arnold <carnold@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The API returns now negative values on error and stashes
the error in errno. Fix the user of this API.
The 'xc_hypercall_bounce_pre' can fail - and if so it will
stash its errno values - no need to over-write it.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Coverity uses several heuristics to identify when one case statement
legitimately falls through into the next, and a comment as the final item in a
case statement is one heuristic (the assumption being that it is a
justification for the fallthrough).
Use this to perform an audit of defects and hide the legitimate fallthroughs.
There are two bugfixes identified in the audit, both minor:
* 'n' command line handling for gtracestat
* BKSPC handling in xentop
All other identified defaults are legitimate fallthoughs
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Coverity-IDs: 1055464, 1055465, 1055467, 1055468, 1055481, 1055482
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Xen Coverity Team <coverity@xen.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Allow certain xentop columns to automatically expand as the amount
of data reported gets larger. The columns allowed to auto expand are:
NETTX(k), NETRX(k), VBD_RD, VBD_WR, VBD_RSECT, VBD_WSECT
If the -f option is used to allow full length VM names, those names will
also be aligned based on the longest name in the NAME column.
The default minimum width of all columns remains unchanged.
Signed-off-by: Markus Hauschild <Markus.Hauschild@rz.uni-regensburg.de>
Signed-off-by: Charles Arnold <carnold@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
CFLAGS+=-Wall is already provided by Config.mk
WARN_FLAGS is not used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Before trying to parse network interface name as 'vif*.*'
try to get the domid and network number from sysfs.
Fixes xentop output for domains with VIF renamed through the
'vifname' xl option.
Signed-off-by: Jacek Konieczny <jajcus@jajcus.net>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
getBridge's method of returning a result was a little confused:
allocating a result buffer but never using it.
Simplify by instead allowing a result buffer to be passed in and
modifying the single usage to match.
Signed-off-by: Matthew Daley <mattd@bugfuzz.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Commit 1438d36f ("xenstat: Fix buffer over-run with new_domains being
negative.") attempted to fix the handling of a negative error result
from xc_domain_getinfolist in xenstat_get_node. However, it forgot to
change the result variable from an unsigned type to a signed one.
Do so, allowing the error result to be handled properly.
Signed-off-by: Matthew Daley <mattd@bugfuzz.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Coverity identified this as:
CID 1055740 Out-of-bounds read - "In xenstat_get_node:
Out-of-bounds read from a buffer (CWE-125)"
And sure enough, if xc_domain_getinfolist returns us -1, we will
try to use it later on in the for (i = 0; i < new_domains; ..)
loop.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
gcc 4.8 identifies several places where code of the form memset(x, 0,
sizeof(x)); is used incorrectly, meaning that less memory is set to
zero than required.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Committed-by: Keir Fraser <keir@xen.org>
Currently, xentop calls clear() before drawing the screen and calling
refresh(). This causes the entire screen to be repainted from scratch
on each call to refresh(). It is inefficient and causes visible flicker
when using xentop.
This patch fixes this by calling erase() instead of clear() which overwrites
the current screen with blanks instead. The screen is then drawn as usual
in the top() function and refresh() is called. This method allows curses
to only repaint the characters that have changed since the last call
to refresh(), thus avoiding the flicker and sending fewer characters to
the terminal.
In the event the screen becomes corrupted, this patch accepts a CTRL-L
keystroke from the user which will call clear() and force a repaint of
the entire screen.
Signed-off-by: Jason McCarver <slam@parasite.cc>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This patch was constructed by grepping for xensource.com over the entire
repository and eyeballing which ones were sensible to update.
In addition, the xen-tools mailing list has been deprecated, so update xentop
to refer to xen-devel instead.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The xenstore header xs.h is producing conflicts with other software[1].
xs is a too short identifier and does not matche the library. Renaming
the headers to xenstore.h and xenstore_lib.h is the easiest way to make
them easy recognizable and prevent furthe problems.
[1]: http://bugs.debian.org/668550
[ Also update QEMU_TAG, to bring in corresponding change to
qemu-xen-traditional. -iwj ]
Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
--HG--
rename : tools/xenstore/xs.h => tools/xenstore/xenstore.h
rename : tools/xenstore/xs_lib.h => tools/xenstore/xenstore_lib.h
The domain name stored in /local/domain/$domid/name is simpler to
access and is the only domain name modified by "xl rename". Use this
domain name in libxenstat's reporting.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Check for a curses compatible library (curses or ncurses basically).
One of those is needed to compile Xen tools (gtraceview and xentop).
Modify Makefiles/sources to use configure output (fetch CURSES_LIBS
from tools/Tools.mk and header to include from tools/config.h)
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Create two new variables called APPEND_ and PREPEND_ to add compile
flags at the beginning or at the end of the search path.
Added a new semantic for user defined compile flags, here is the list
of possible options:
PREPEND_LIB: add libraries to the search path before xen
(before xen installation folders).
PREPEND_INCLUDES: add headers to the search path before xen
(before xen installation folders).
APPEND_LIB: add libraries to the search path at the end
(after all xen installation folders have been added).
APPEND_INCLUDES: add libraries to the search path at the end
(after all xen installation folders have been added).
EXTRA_INCLUDES and EXTRA_LIB can still be used, and they will have the
same effect as PREPEND_INCLUDES and PREPEND_LIB.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
Linker command lines are order-sensitive.
Move linker options -Lfoo -lfoo from LDFLAGS to LDLIBS and place this new
variable after the objects to link. This resolves build errors in xenpagin
and blktap with recent toolchains.
rename SHLIB_CFLAGS to SHLIB_LDFLAGS
rename LDFLAGS_* to LDLIBS_*
move LDFLAGS usage after CFLAGS in CC calls
remove stale comments in xenpaging Makefile
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Wei Liu
Andrew Cooper
Konrad Rzeszutek Wilk
Zhigang Wang
Juergen Gross
Ian Campbell
Daniel Kiper
Olaf Hering
Charles Arnold
Markus Hauschild
Christian Wolter
Jacek Konieczny
Matthew Daley
Roger Pau Monne
Konrad Rzeszutek Wilk
Michael Young
Jason McCarver
Daniel De Graaf
Roger Pau Monne
Keir Fraser
Stefano Stabellini