To match our naming convention. Since we released p9 one release ago,
we need to define a macro inside libxl.h to indicate the change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
We need to choose ACPI tables properly depending on the device
model version we are running. Previously, this decision was
made by BIOS type specific code in hvmloader, e.g. always load
QEMU traditional specific tables if it's ROMBIOS and always
load QEMU Xen specific tables if it's SeaBIOS.
This change saves this behavior (for compatibility) but adds
an additional way (xenstore key) to specify the correct
device model if we happen to run a non-default one. Toolstack
bit makes use of it.
The enforcement of BIOS type depending on QEMU version will
be lifted later when the rest of ROMBIOS compatibility fixes
are in place.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
With musl, the build fails with the following errors:
actypes.h:202:2: error: #error unknown ACPI_MACHINE_WIDTH
#error unknown ACPI_MACHINE_WIDTH
^~~~~
actypes.h:207:9: error: unknown type name ‘acpi_native_uint’
typedef acpi_native_uint acpi_size;
^~~~~~~~~~~~~~~~
actypes.h:617:3: error: unknown type name ‘acpi_io_address’
acpi_io_address pblk_address;
^~~~~~~~~~~~~~~
This likely went undetected with glibc builds since glibc
indirectly pulls __BITS_PER_LONG from the linux headers
through a standard header. For musl, this is not the case.
Instead, use BITS_PER_LONG to fix the build.
Signed-off-by: Daniel Sabogal <dsabogalcc@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add a new libxl function to set hypervisor parameters at runtime
similar to boot time parameters via command line.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
We need to choose ACPI tables and ACPI IO port location
properly depending on the device model version we are running.
Previously, this decision was made by BIOS type specific
code in hvmloader, e.g. always load QEMU traditional specific
tables if it's ROMBIOS and always load QEMU Xen specific
tables if it's SeaBIOS.
This change saves this behavior (for compatibility) but adds
an additional way (xenstore key) to specify the correct
device model if we happen to run a non-default one. Toolstack
bit makes use of it.
The enforcement of BIOS type depending on QEMU version will
be lifted later when the rest of ROMBIOS compatibility fixes
are in place.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Do not setup vfb+vkb when no access method was configured. Then check if
qemu is really needed.
The only not configurable thing forcing qemu running in dom0 after this
change are consoles used to save/restore. But even in that case, there
is much smaller part of qemu exposed.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements xl/xc changes to support get HW info
for L2 CAT.
'xl psr-hwinfo' is updated to show both L3 CAT and L2 CAT
info.
Example(on machine which only supports L2 CAT):
Cache Monitoring Technology (CMT):
Enabled : 0
Cache Allocation Technology (CAT): L2
Socket ID : 0
Maximum COS : 3
CBM length : 8
Default CBM : 0xff
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If LMCE is supported by host and ' mca_caps = [ "lmce" ] ' is present
in xl config, the LMCE capability will be exposed in guest MSR_IA32_MCG_CAP.
By default, LMCE is not exposed to guest so as to keep the backwards migration
compatibility.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com> for hypervisor side
Acked-by: Wei Liu <wei.liu2@citrix.com>
When valid mmio_hole is set in hvm.cfg, segment fault happens at accessing
localents pointer.
Because the size of localents pointer isn't enough to store appended
mmio_hole_size parameter.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
IGD passthrough couldn't work on Skylake and Kabylake, because their
Device ID aren't in fixup_ids[]. Currently we need to add every intel
graphic ID into fixup_ids[], it is hard to maintain.
This patch judge intel graphics through vendor id (0x8086) and class
code(0x030000), this could support both the old and new intel graphics,
and reduce maintain work in future.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
No functional change. Just extract this function for next patch and avoid
code repetition.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This is result of parsing cpu_map.xml from libvirt.
The most important part is handling leaf 0x00000007, but while at it add
other bits too.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Current code in backend_watch_callback has two issues when manipulating the
dguest list:
1. backend_watch_callback forgets to remove a libxl__ddomain_guest from the
list of tracked domains when the related data is freed, causing dereferences
later on when the list is traversed. Make sure that a domain is always removed
from the list when freed.
2. A spurious device state change can cause a dguest to be freed, with active
devices and without being removed from the list. Fix this by always checking if
a dguest has active devices before freeing and removing it.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported-by: Reinis Martinsons <admin@frp.lv>
Suggested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Current code can free the libxl__device inside of the libxl__ddomain_device
before the addition has finished if a removal happens while an addition is
still in process:
backend_watch_callback
|
v
add_device
| backend_watch_callback
(async operation) |
| v
| remove_device
| |
| V
| device_complete
| (free libxl__device)
v
device_complete
(deref libxl__device)
Fix this by creating a temporary copy of the libxl__device, that's tracked by
the GC of the nested async operation. This ensures that the libxl__device used
by the async operations cannot be freed while being used.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Initialise *size in default branch to prevent certain compilers (i.e.
Linaro GCC 5.2-2015.11-2) from reporting "variable may be used uninitialized"
errors in caller function.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
The Requires line in this config file uses the wrong names for two dependencies.
The package config file for xenctrl is called 'xencontrol' and for blktapctl is
called 'xenblktapctl'. Running a command like 'pkg-config --exists xenlight' will
fail without this fix.
Signed-off-by: Charles Arnold <carnold@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Currently usbdevice_list is only checked for nullity. But the OCaml
binding will convert empty list to a pointer to NULL, instead of a
NULL pointer. That means the OCaml binding will fail to disable USB.
This patch will check emptiness of usbdevice_list. And NULL is still a
valid empty list.
Signed-off-by: Robin Lee <robinlee.sysu@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
It being very very basic, also means this scheduler does
not need much support at the tools level (for now).
Basically, just the definition of the symbol of the
scheduler itself and a couple of stubs.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Currently setting altp2mhvm=1 in the domain configuration allows access to the
altp2m interface for both in-guest and external privileged tools. This poses
a problem for use-cases where only external access should be allowed, requiring
the user to compile Xen with XSM enabled to be able to appropriately restrict
access.
In this patch we deprecate the altp2mhvm domain configuration option and
introduce the altp2m option, which allows specifying if by default the altp2m
interface should be external-only or limited. The information is stored in
HVM_PARAM_ALTP2M which we now define with specific XEN_ALTP2M_* modes.
If external mode is selected, the XSM check is shifted to use XSM_DM_PRIV
type check, thus restricting access to the interface by the guest itself. Note
that we keep the default XSM policy untouched. Users of XSM who wish to enforce
external mode for altp2m can do so by adjusting their XSM policy directly,
as this domain config option does not override an active XSM policy.
Also, as part of this patch we adjust the hvmop handler to require
HVM_PARAM_ALTP2M to be of a type other then disabled for all ops. This has been
previously only required for get/set altp2m domain state, all other options
were gated on altp2m_enabled. Since altp2m_enabled only gets set during set
altp2m domain state, this change introduces no new requirements to the other
ops but makes it more clear that it is required for all ops.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Signed-off-by: Sergej Proskurin <proskurin@sec.in.tum.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add functions to libxl to setup a Xen 9pfs frontend/backend connection.
Add support to xl to parse a 9pfs option in the VM config file, in the
following format:
p9=["tag=share_dir,security_model=none,path=/root/share_dir"]
where tag identifies the 9pfs share and it is required to mount it on
the guest side, path is the path of the filesystem to share and the only
security_model supported is "none" which means that files are stored
using the same credentials as they are created on the guest (no user
ownership squash or remap).
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Section 2.4.4 of the Hypervisor Top Level Functional Specification states
that enabling bit 10 in EDX of CPUID leaf 3 advertises to Windows a set
of MSRs into which it can write crash information.
This patch advertises that bit and implements the MSRs such that Xen can
log the information if a Windows guest crashes.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Replace raw xs_read() calls with libxl__xs_read_checked() and bail on error.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
On soft reset we remove the domain from xenstore and introduce it back to
have everything reconnected. Console, however, stays attached (as xenconsoled
checks if the domain is dying and our domain is not) but we lose the
information about tty:
before soft reset:
console = ""
...
type = "xenconsoled"
output = "pty"
tty = "/dev/pts/1"
...
after:
console = ""
...
type = "xenconsoled"
output = "pty"
tty = ""
...
The issue applies to both HVM and PVH but for HVM guests serial console
through QEMU is usually in use and for PVH we don't have it.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Guests with LIBXL_DEVICE_MODEL_VERSION_NONE don't have a device model
running so there is no save file to rename.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
c/s 4045953 "x86/paging: Enforce PG_external == PG_translate == PG_refcounts"
in the hypervisor finally prevented the construction of PV autotranslate
guests.
Remove support for such guests in the domain builder, bailing out with an
obvious "no longer supported" message, rather than a more obscure
"SHADOW_OP_ENABLED failed".
As a piece of cleanup, rename xc_dom_feature_translated() to
xc_dom_translated() to match its actual semantics.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The QEMU community has asked us to change QMP command
xen-get-replication-error to query-xen-replication-status. Modify Xen
side to use the new name.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The QEMU community has asked us to change the QMP command from
xen-do-checkpoint to xen-colo-do-checkpoint. Modify Xen side to use
the new name.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Due to a bug in the glibc headers the macros makedev(), major() and
minor() where avaialble by including sys/types.h. This bug was
addressed in glibc-2.25 by introducing a warning when these macros are
used. Since Xen is build with -Werror this new warning cause a compile
error.
Use sys/sysmacros.h to define these three macros.
blktap2 is already Linux specific. The kernel header which was used to
get makedev() does not provided it anymore, and it was wrong to use a
kernel header anyway.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 3e5f1a63b5 ("tools: adapt xenlight.pc and xlutil.pc to
new pkg-config scheme") introduced an error for "make distclean" as
*.pc.in are deleted which are now files in git.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Instead of generating the *.pc.in files at configure time use the new
pkg-config scheme for those files. Add the dependencies to other Xen
libraries as needed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Instead of installing $(PKG_INSTALLDIR) in multiple Makefiles below
tools, do so in tools/Makefile.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Chao Gao
Wei Liu
Igor Druzhinin
Daniel Sabogal
Juergen Gross
Marek Marczykowski-Górecki
Yi Sun
Petre Pircalabu
Haozhong Zhang
Xiong Zhang
Roger Pau Monne
Andrii Anisov
Charles Arnold
Robin Lee
Alistair Francis
Dario Faggioli
Tamas K Lengyel
Stefano Stabellini
Paul Durrant
Vitaly Kuznetsov
Zhang Chen
Andrew Cooper
Olaf Hering