As common isn't built for RISC-V architecture now, accordingly,
common/coverage (where __gconv_* function are defined) isn't built either
but randconfig may decide to enable CONFIG_COVERAGE which will lead to
the following compilation error:
riscv64-linux-gnu-ld: prelink.o: in function `.L0 ':
arch/riscv/early_printk.c:(.text+0x18):
undefined reference to `__gcov_init'
riscv64-linux-gnu-ld: arch/riscv/early_printk.c:(.text+0x40):
undefined reference to `__gcov_exit'
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Whether to build only Xen, or everything, is a property of container,
toolchain and/or testcase. It is not a property of XEN_TARGET_ARCH.
Capitalise HYPERVISOR_ONLY and have it set by all the
debian-unstable-gcc-arm32-* testcases at the point that arm32 get matched with
a container that can only build Xen.
To reduce the churn elsewhere, retain the RANDCONFIG implies HYPERVISOR_ONLY
property.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add test jobs in both debug and non-debug versions to run hyp-xen-version
XTF test as a dom0less domU on arm64. The purpose of this test is to
validate the functional behavior of xen_version hypercall.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Populate test jobs for Yocto based tests using the provided containers.
Due to the size restrictions, it is currently not possible to split the
build and run tasks, therefore everything is done in a single step.
Test jobs for the supported Yocto targets are generic to avoid the
necessity to add new ones after each Yocto release. The only thing
required to be changed after updating the containers is the variable
YOCTO_VERSION stored in a .yocto-test template.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, we define lots of test jobs in test.yaml, that make use
of the same configuration sections like variables, tags, artifacts.
Introduce templates (hidden jobs whose names start with a dot) to
reduce the overhead and simplify the file (more than 100 lines saved).
This way, the actual jobs can only specify sections that are unique
to them.
Most of the test jobs specify the same set of prerequisite jobs under
needs property with just one additional being unique to the job itself.
Introduce YAML anchors for that purpose, because when using extends, the
needs property is not being merged (the parent property overwrites the
child one).
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
After qemu arm64 test scripts had been renamed to reflect their
usage, do the same for the qemu arm32 test script. Currently it only
boots dom0, so we can assume that this script will be used to perform
dom0 based testing. In the future we will be able to create corresponding
script qemu-smoke-dom0less-arm32.sh to perform dom0less based testing.
This is the last step to get rid of ambiguity with regards to naming
of Arm test scripts.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
qemu-alpine-arm64.sh script is used to perform dom0 based testing.
Rename this script to qemu-smoke-dom0-arm64.sh to reflect its usage.
Also rename the corresponding test jobs.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Testing arm64 is done using the qemu-alpine-arm64.sh and
qemu-smoke-arm64.sh scripts. These scripts are executed with exactly
the same artifacts (container, rootfs, kernel, qemu) and the only
difference is that the former is used to perform dom0 based testing
and the latter - dom0less based testing.
Because the current naming is quite ambiguous, rename qemu-smoke-arm64.sh
script to qemu-smoke-dom0less-arm64.sh to reflect its usage.
qemu-alpine-arm64.sh will be renamed in the follow-up patch.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, all the tests are executed on non-debug Xen builds.
To improve the coverage (e.g. we might catch some asserts), add new
test jobs using debug Xen builds.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
For arm64 we perform builds using debian and alpine containers.
We are missing the randconfig build jobs for the latter, so add them.
This way for each container we have 4 fundamental build jobs:
- defconfig non-debug/debug
- randconfig non-debug/debug
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
NULL scheduler is not enabled by default on non-debug Xen builds. This
causes the boot time cpupools test to fail on such build jobs. Fix the issue
by explicitly specifying the config options required to enable the NULL
scheduler.
Fixes: 36e3f41587 ("automation: Add a new job for testing boot time cpupools on arm64")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
buster-gcc-ibt is a dedicated test to run a not-yet-upstreamed compiler patch
which is relevant to CONFIG_XEN_IBT in 4.17 and later.
Force it on, rather than having 50% of the jobs not testing what they're
supposed to be testing.
Fixes: 5d59421815 ("x86: Use control flow typechecking where possible")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
[stefano: minor code style improvement]
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Currently, all the arm64 defconfig build jobs, regardless of the
container used, end up building Xen with the extra config options
specified in the main build script (e.g. CONFIG_EXPERT,
CONFIG_STATIC_MEMORY). Because these options are only needed for
specific test jobs, the current behavior of the CI is incorrect
as we add the extra options to all the defconfig builds. This means
that on arm64 there is not a single job performing proper defconfig build.
To fix this issue, add custom build jobs each time there is a need for
building Xen with additional config options. Introduce EXTRA_XEN_CONFIG
variable to be used by these jobs to store the required options. This
variable will be then read by the main build script to modify the .config
file. This will also help users to understand what is needed to run specific
test.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add a new test job qemu-smoke-arm64-gcc-boot-cpupools that will execute
script qemu-smoke-arm64.sh to test boot time cpupools feature.
Enable CONFIG_BOOT_TIME_CPUPOOLS for the arm64 build and add a new test
case in qemu-smoke-arm64.sh that if selected will make use of the
ImageBuilder feature to create cpupool with cpu@1, null scheduler and
assign it to domU. Add a check in dom0 xen.start to see if domU is
assigned a Pool-1 with null scheduler.
Take the opportunity to refactor the qemu-smoke-arm64.sh script as
follows:
- use domU_check to store the test's commands to be run from domU
- use dom0_check to store the test's commands to be run from dom0
- use fdtput instead of sed to perform dtb modifications
- use more meaningful messages for "passed" variable. This way we can
grep for messages reported either by domU or dom0 and get rid of
assumption that tests can only be run from domU
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
After qemu-smoke-arm64 was changed to use kernel 5.19 we end up having
two kernel configurations. This is something not needed and maintaining
a single kernel version is always easier. Modify qemu-alpine-arm64-gcc
to use kernel 5.19 and remove kernel 5.9 from tests-artifacts.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Ayan Kumar Halder <ayankuma@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
This patch modified the test in the following way
- Dom0 is booted with an alpine linux rootfs with the xen tools.
- Once Dom0 is booted, it starts xenstored, calls init-dom0less to setup
the xenstore interface for the dom0less Dom1, setups the bridged network
and attaches a pv network interface to Dom1.
- In the meantime, Dom1 in its init script tries to assign an ip to eth0
and ping Dom0,
- If Dom1 manages to ping Dom0, it prints 'passed'.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Use kernel 5.19 to unblock testing dom0less enhanced.
This kernel version has the necessary patches for deferring xenbus probe
until xenstore is fully initialized.
Also, build kernel with bridging and xen netback support enabled because
it will be used for testing network connectivity between Dom0 and Dom1
over a pv network interface.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Enable CONFIG_STATIC_MEMORY in the existing arm64 build.
Create a new test job, called qemu-smoke-arm64-gcc-staticmem.
Adjust qemu-smoke-arm64.sh script to accomodate the static memory test as a
new test variant. The test variant is determined based on the first argument
passed to the script. For testing static memory, the argument is 'static-mem'.
The test configures DOM1 with a static memory region and adds a check in the
init script.
The check consists in comparing the contents of the /proc/device-tree
memory entry with the static memory range with which DOM1 was configured.
If the memory layout is correct, a message gets printed by DOM1.
At the end of the qemu run, the script searches for the specific message
in the logs and fails if not found.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Penny Zheng <penny.zheng@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Like with "dependencies", the jobs will get artifacts from the jobs
listed in "needs". But the test jobs can run as soon as the build jobs
listed have finished.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The name of the field doesn't matter because it's use as a YAML achor,
but it's nicer to have the proper spelling.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add a minimal ARM32 smoke test based on qemu-system-arm, as provided by
the test-artifacts qemu container. The minimal test simply boots Xen
(built from previous build stages) and Dom0.
The test needs a working kernel and minimal initrd for dom0. Instead of
building our own kernel and initrd, which would mean maintaining one or
two more builting scripts under automation/, we borrow a kernel and
initrd from distros.
For the kernel we pick the Debian Bullseye kernel, which has everything
we need already built-in. However, we cannot use the Debian Bullseye
initrd because it is 22MB and the large size causes QEMU to core dump.
Instead, use the tiny busybox-based rootfs provided by Alpine Linux,
which is really minimal: just 2.5MB. Note that we cannot use the Alpine
Linux kernel because that doesn't boot on Xen.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Michal Orzel <michal.orzel@arm.com>
Add qemu-system-arm to the existing test-artifacts qemu container (which
doesn't get build for every iteration but only updated once in a while.)
With qemu-system-arm available, we'll be able to run ARM32 tests.
This patch also bumps the QEMU version to v6.0.0 for both arm32 and
arm64 (the test-artifacts container is one, shared for both).
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Now all indirect branch targets have been annotated, turn on typechecking to
catch issues in the future.
This extension isn't in a released version of GCC yet, so provide a container
to use with the extension included, and add it to CI. RANDCONFIG is necessary
because some stubs for compiled-out subsystems are used as function pointer
targets.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Introduce a test based on QEMU to run Xen, Dom0 and start a DomU.
This is similar to the existing qemu-alpine-arm64.sh script and test.
The only differences are:
- use Debian's qemu-system-x86_64 (on ARM we build our own)
- use ipxe instead of u-boot and ImageBuilder
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Build a 5.10 kernel to be used as Dom0 and DomU kernel for testing. This
is almost the same as the existing ARM64 recipe for Linux 5.9, the
only differences are:
- upgrade to latest 5.10.x stable
- force Xen modules to built-in (on ARM it was already done by defconfig)
Also add the exporting job to build.yaml so that the binary can be used
during gitlab-ci runs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
It is the same as the existing ARM64 alpine 3.12 test-artifact. It is
used to export an Alpine rootfs for Dom0 used for testing.
Also add the exporting job to build.yaml so that the binaries can be
used during gitlab-ci runs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The current single *.log pattern collects just config.log, which
usually contains little useful information.
Collect also log files in subdirectories, tools/config.log usually
contains information about configure failures.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add a debian build container with cross-gcc for arm32 installed.
Add build jobs to cross-compile Xen-only for arm32.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Now that the Alpine Linux build jobs complete successfully on staging we
can remove the "allow_failure: true" tag.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
Logical continuation of c/s eb52442d7f "automation: Add Ubuntu:focal
container".
No further changes required. Everything builds fine.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
In order to use the pre-built test-artifacts/qemu-system-aarch64 binary
for our tests, first we need to import it into the pipeline. Let's do
that the same way we did it for the kernel and Alpine Linux filesystem:
by creating a special job for it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
Use the tests-artifacts kernel, instead of the Debian kernel, for the
qemu-smoke-arm64-gcc job.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
Create a test job that starts Xen and Dom0 on QEMU based on the alpine
linux rootfs. Use the Linux kernel and rootfs from the tests-artifacts
containers. Add the Xen tools binaries from the Alpine Linux build job.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
In order to make available the pre-built binaries of the
automation/tests-artifacts containers to the gitlab-ci pipeline we need
to export them as gitlab artifacts.
To do that, we create two "fake" jobs that simply export the require
binaries as artifacts and do nothing else.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
Allow failure for these jobs. Currently they fail because hvmloader
doesn't build with musl. The failures don't block the pipeline.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
Use QEMU to start Xen (just the hypervisor) up until it stops because
there is no dom0 kernel to boot.
It is based on the existing build job unstable-arm64v8.
Also use make -j$(nproc) to build Xen.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
CentOS 6 is no longer supported by upstream so we cannot test against it
for future Xen releases.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
A recent rebuild of the CI contaniers switched from Fedora 29 to 30 because
the dockerfile is targetting latest.
Unfortunately, the version of iPXE in master doesn't build with the default
GCC in Fedora 30, which is blocking all CI activity.
Switch from latest to an explicit version, to avoid future breakage.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
Using clang and lld 8 requires installing the packages from the
official llvm apt repositories, so modify the Debian Docker files for
stretch and unstable to add the llvm repo and install clang and lld
from it.
Also add some jobs to test building Xen with clang 8 and lld.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
We will soon provide this new capability to humans and automated
systems.
The default behaviour is retained: tip and base are passed by Gitlab
CI.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
072a96c490 used `git clean -ffdx` which caused the log to be deleted.
Generate the log in the parent directory then move it back.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
The build script invoked is designed to run in a pristine checkout.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
It is easier to debug stuff when the target range is clearly visible
at the top.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Oleksii Kurochko