Apparently 64MB is too short for the domain builder.
No kernel option should be passed, as they are provided by menu.lst,
and would only confuse grub.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
When domains are destroyed, _prepare_phantom_paths() method
and _cleanup_phantom_devs() method are called twice as follows.
destroy()@XendDomainInfo.py
_prepare_phantom_paths() --------------- 1
_cleanupVm()
destroyDomain()
_prepare_phantom_paths() ----------- 2
xc.domain_destroy_hook()
xc.domain_pause()
do_FLR()
xc.domain_destroy()
XendDomain.remove_domain()
cleanupDomain()
_cleanup_phantom_devs() ------------ 1
_cleanup_phantom_devs() ---------------- 2
XendDomain.domain_delete_by_dominfo()
This is a cleanup patch. It combines destroyDomain() method
into destroy() method, then _prepare_phantom_paths() method and
_cleanup_phantom_devs() method are called only once.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
gcc expects libraries needed for object files to be specified after
the object. Linking usually does not fail, unless it is optimized (for
instance, using -Wl,-as-needed).
The related Gentoo bug is 135145 [ https://bugs.gentoo.org/135145 ].
From: Robert Buchholz <rbu@gentoo.org>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
since our seek times are virtually 0. Although this flag is
deprecated by newer ATA standards, Linux at least checks it for CD
drives, and would timeout in some cases if we do not set it.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
When creating an HVM domain, if e.g. another domain is created before
qemu allocates video memory, the extra 8MB memory ballooning is not
available any more, because it got consumed by the other domain.
This fixes it by taking video memory from the main memory:
- make hvmloader use e820_malloc to reserve some of the main memory
and notify ioemu of its address through the Xen platform PCI card.
- add XENMAPSPACE_mfn to the xen_add_to_physmap memory op, to allow
ioemu to move the MFNs between the original position and the PCI
mapping, when LFB acceleration is disabled/enabled
- add a remove_from_physmap memory op, to allow ioemu to unmap it
completely for the case of old guests with acceleration disabled.
- add xc_domain_memory_translate_gpfn_list to libxc to allow ioemu to
get the MFNs of the video memory.
- have xend save the PCI memory space instead of ioemu: if a memory
page is there, the guest can access it like usual memory, so xend
can safely be responsible to save it. The extra benefit is that
live migration will apply the logdirty optimization there too.
- handle old saved images, populating the video memory from ioemu if
really needed.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
To avoid flickers, PyGRUB has to avoid spurious ncurses refresh as
much as possible, in particular before the complete screen is drawn,
and eventually call doupdate last.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
When we "xm destroy" a guest with assigned devices, in
xen/common/domain.c:domain_kill(), we relinquish guest's memory first,
then invoke domain_destroy() -> complete_domain_destroy() ->
arch_domain_destroy() -> pci_release_devices()/iommu_domain_destroy().
Between relinquish_memory() and domain_destroy(), a device may be
issuing DMA request and access guest's relinquished memory.
We can do_FLR() to quiesce devices before xc.domain_destroy().
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
pass for the HVM guest to successfully boot.
Currently only one test (REP INS across page boundaries) but more will
be added in future.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
VT-d hot-plug is done in such a way: 1) xend sends 'pci-ins' command
to ioemu via xenstore; 2) ioemu creates pass-through device and raises
SCI to guest OS; guest OS loads device driver, and device driver
initializes the hot-plugged device; 3) xend does FLR. There is a race
condition about 2) and 3). If 3) runs slow, we have troubles. Thanks
for Yuji Shimada's locating the issues.
We can work around the issues by not doing FLR when we create domain
or hotplug device into guest, namely, we only do FLR when we destroy
domain or hotplug device from guest.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
This fixes a crash when restoring guests with certain memory sizes (eg
223MB). The ROUNDUP in the call to memcpy, was the main offender, but
I didn't care for the inplace resizing of the p2m entries either.
Signed-off-by: Bruce Rogers <brogers@novell.com>
Attached patch allows to pass arguments to xenconsoled
via XENCONSOLED_TRACE env. variable analogous to xenstored.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
On ia64, direct Linux boot is not supported, and 'Flash.fd' or
'guest_firmware.bin' has been used as a value of the 'kernel'
option. Cset:17016 ignores those strings and overrides them with
"/usr/lib/xen/boot/hvmloader".
Signed-off-by: Kazuhiro Suzuki <kaz@jp.fujitsu.com>
Signed-off-by: KUWAMURA Shin'ya <kuwa@jp.fujitsu.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
x86 IOMMU support added a lot of assumptions about what PCI buses look
like and where to find bridge devices. On ia64, we don't yet have
virtualization friendly IOMMUs, so for the moment, we just want to
keep "unsafe" PV PCI pass through working as well as it did in Xen
3.2. Looking at the code, it almost seems like x86 has thrown out
support for the old style driver domain. Things that don't
necessarily work on every PCI compliant architecture:
* You can't assume that just because there's a device at 01:01.0
that there's also a bridge at 01:00.0 and blow-up when you
don't find it. On HP ia64 boxes, PCI root bridges are not
necessarily exposed as a PCI device. This pretty much means
we can't call into any of the "FLR" code paths.
* BAR alignment: it's hard to have BAR alignment when your page
size is 16k. This wasn't a requirement for previous PV driver
domains, so I assume it's only for IOMMU support.
This is ugly, so I'm open to suggestions. It seems that all of these
architecture checks could be replaced by checking some "iommu_present"
variable to test whether the extra requirements are necessary.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
There is a small bug on the serial emulation code that prevents kgdb
from working correctly over the serial.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Currently we are trying to read the same value twice in the
serial_load function, this patch fixes that.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch exposes the persistent (aka managed) domain path in xend
configuration file. This option is already supported in XendOptions
but is not annotated in the configuration file.
Signed-off-by: Jim Fehlig <jfehlig@novell.com>
memory sizes greater than 2GB when built as a 32-bit binary.
Instead, direct HVM Linux loading approximates end of low memory via a
different method.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Latest QEMU would add a NIC device by default, unless specify the
"-nic none". So end user still get a unusable NIC even no vif in the
config file.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Keir Fraser