If this option is given don't bother building qemu-xen ourselves. Likely to be
handy for distros who have an existing qemu package which they want to reuse.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Now that we have upstream qemu people may want to avoid building this extra
code.
There is a little bit of trickery in stubdom/configure.ac to ensure that the
ioemu stubdom is only built if qemu-traditional is enabled.
libxl will return an error if a caller tries to build a domain using
qemu-xen-traditional when this support was disabled at build time. Since
qemu-xen-traditional has been historically tightly bound to the Xen releases I
don't see any value in supporting "3rd party" provision of
qemu-xen-traditional.
We also do not want/need this on ARM therefore default is on for x86 and off
otherwise.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- trivial conflicts in Tools.mk.in and tools/configure.ac.
Reran autogen.sh ]
"debball" by analogy with "tarball". Attempt to clarify the purpose of this
target in the comment.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
These files were left over after
$ git clean -f -dx
$ ./configure
$ make distclean
and picked up by a subsequent.
$ git clean -f -dx
Ensure that these files are also correctly ignored.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Hotplug has been replaced by udev since several years. Remove the
hotplug related files and install udev unconditionally.
This makes it possible to remove udev from rpm BuildRequires which
reduces the buildtime dependency chain. For openSuSE:Factory it was
done just now:
http://lists.opensuse.org/opensuse-buildservice/2012-10/msg00085.html
The patch by itself will have no practical impact unless someone
attempts to build and run a Xen dom0 on a really old base system. e.g.
circa SLES9/2007 or earlier
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
In the toplevel Makefile "install-docs" (depended on by "install" and
hence "dist"), but not "build", ignores errors.
This was inherited from before 24563:4271634e4c86, prior to which the
||true seems intended to handle failures of check_pkgs. Nowadays we
handle docs tools individually in the docs makefiles so there is no
need for this ||true here.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The pattern used is very broad and will delete any kernel with xen in
its filename, likewise modules, including those which come packages
from the distribution etc.
I don't think this was ever the right thing to do but it is doubly
wrong now that Xen does not even build or install a kernel by default.
Push cleanup of the installed hypervisor down into xen/Makefile so that
it can cleanup exactly what it actually installs.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Looks-good: Jan Beulich <JBeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The xenstore header xs.h is producing conflicts with other software[1].
xs is a too short identifier and does not matche the library. Renaming
the headers to xenstore.h and xenstore_lib.h is the easiest way to make
them easy recognizable and prevent furthe problems.
[1]: http://bugs.debian.org/668550
[ Also update QEMU_TAG, to bring in corresponding change to
qemu-xen-traditional. -iwj ]
Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
--HG--
rename : tools/xenstore/xs.h => tools/xenstore/xenstore.h
rename : tools/xenstore/xs_lib.h => tools/xenstore/xenstore_lib.h
We already have xenversion as a target in the xen subdirectory;
simply extend it so that "make xenversion" does what you'd expect.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Added autotools magic to replace custom check scripts. The previous
checks have been ported to autoconf, and some additional ones have
been added (plus the suggestions from running autoscan). Two files are
created as a result from executing configure script, config/Tools.mk
and config.h.
conf/Tools.mk is included by tools/Rules.mk, and contains most of the
options previously defined in .config, that can now be set passing
parameters or defining environment variables when executing configure
script.
config.h is only used by libxl/xl to detect yajl_version.h.
[ tools/config.sub and config.guess copied from
autotools-dev 20100122.1 from Debian squeeze i386,
which is GPLv2.
tools/configure generated using the included ./autogen.sh
which ran autoconf 2.67-2 from Debian squeeze i386. autoconf
is GPLv3+ but has a special exception for the autoconf output;
this exception applies to us and exempts us from complying
with GPLv3+ for configure, which is good as Xen is GPL2 only.
- Ian Jackson ]
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Tested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
These have broken the build and it seems to be difficult to fix. So
we will revert the whole lot for now, and await corrected patch(es).
Revert "fix the build when CONFIG_QEMU is specified by the user"
Revert "tools: fix permissions of git-checkout.sh"
Revert "scripts/git-checkout.sh: Is not bash specific. Invoke with /bin/sh."
Revert "Clone and build Seabios by default"
Revert "Clone and build upstream Qemu by default"
Revert "Rename ioemu-dir as qemu-xen-traditional-dir"
Revert "Move the ioemu-dir-find shell script to an external file"
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Adds "make deb", which does a "make dist" build and wraps the
resulting dist/install files in dist/xen-<version>.deb
This is _not_ a "packaged" version of Xen for Debian users, nor is it
intended to compete with anyone else's packaging efforts. In
particular it doesn't do any of the boot-time or fstab fixups needed
to actually start the xen tools. It's just a quick hack for
developers to be able to quickly install and uninstall a Xen build on
a test box.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
This patch adds an explicit update mechanism:
make tools/ioemu-dir-force-update
This isn't brilliant but is better than doing "cd tools/ioemu-remote
&& git reset --hard <sha1...>" by hand.
Note that invoking this target will destroy all working tree changes
made to qemu-xen.
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduce CONFIG_LEAF_DIR, SUBSYS_DIR, INITD_DIR variables to cope
better with variation between distributions.
See docs/misc/distro_mapping.txt for details.
Signed-off-by: Bruce Edge <bruce.edge@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently "make stubdom" on its own fails because it depends on files
being installed by the results of "make tools". This also means that
in some circumstances a parallel "make tools stubdom" (or "make all")
can fail due to races. So make "make stubdom" depend on "make tools"
having completed first.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Separate the miscellaneous actions the dist: target does into its own
target so you can run them independently.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
This patch updates the Makefile to download the latest version of
tboot, which supports the interface changes made recently. This
should go into 3.4, since 3.4 supports the new tboot interface.
Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Previously, by default we would install our python modules into
/usr/lib/python/xen, for example /usr/lib/python/xen/__init__.py.
Upstream python's standard install location (a) includes the Python
version number and (b) puts things in site-packages by default.
Our best conjecture for the reason for this was an attempt to make the
installs portable between different python versions. However, that
doesn't work because compiled python modules (.pyc), and C python
extensions corresponding to one version of python, are not compatible
across different versions of python.
This is why upstream include the version number.
site-packages is the standard location for locally-installed packages
and is automatically included on the python search path.
In this change, we abandon our own unusual python path setup:
* Invoke setup.py in an entirely standard manner. We pass
PREFIX and DESTDIR using the appropriate options provided by
setup.py for those purposes (adding them to setup.py calls
which were previously lacking them).
* Since the installation locations are now on the standard
python path, we no longer need to add anything to the path
in any of our python utilities. Therefore remove all that
code from every python script. (Many of these scripts
unconditionally added /usr/lib/python and /usr/lib64/python which
is wrong even in the old world.)
* There is no longer any special `Xen python path'. xen-python-path
is no longer needed. It is no longer called by anything in our
tree. However since out-of-tree callers may still invoke it, we
retain it. It now prints a fixed string referring to a directory
which does not to exist; callers (who use it to augment their
python path) will thus add a nonexistent directory to their python
path which is harmless.
* Remove various workarounds including use of setup.py --home
(which is intended for something completely different).
* Remove tests for the XEN_PYTHON_NATIVE_INSTALL build-time
environment variable. The new behaviour is the behaviour which we
should have had if this variable had been set. That is, it is now
as if this variable was always set but also bugs in the resulting
install have been fixed.
This should be a proper fix for the bug addressed by c/s 19515.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
'SBDF' format is "[SEG#:]BUS#:DEV#.FUNC#"
ex) 0000:0a:1f.3
Device path format is "HID[:UID]-DEV#.FUNC#[-DEV#.FUNC#[...]]"
ex) PNP0A08:0-2.0-0.0
The command can be executed as follows.
# device_path 0a:1f.3
PNP0A08:0-2.0-0.0
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
I have copied the tarballs that the xen-unstable build downloads to
xenbits.xensource.com (which also hosts our hg and git). This patch
changes the download URLs to use that location.
That way the build will depend on only one external machine, under one
administration, rather than many. Also it means that the build won't
break if these sites become permanently unavailable or are rearranged
and we don't run a risk of having to panic and beg if a file should go
missing.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
The stubdom and tools directories both run `make ioemu-dir-find' in
tools. In a parallel build, both these invocations can run
concurrently because we're doing recursive make.
This change fixes this problem by adding a suitable dependencies in
the top-level Makefile for the recursion into tools/ and stubdom/,
ensuring that the git fetch happens once, first.
The bug was introduced in 18472/18474.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch updates the Xen to work with the latest version (20071128)
of Trusted Boot (tboot). This version of tboot now resides at 16MB
(instead of the previous <1MB), in addition to several other
enhancements. By residing at 16MB, this version of tboot will be
protected from access by dom0.
This patch allows Xen to correctly map the tboot shutdown code that it
must trampoline into for a clean shutdown (without this patch Xen will
fault on shutdown). This patch will also work with the previous
version of tboot.
Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Ian Campbell