Current issues with this test are:
- when the job timeout, the log file is lost as there is no chance to
run the `mv` command.
- GitLab job log is limited in size, so one usually have to download
the artifacts, which may be missing.
Use $GITLAB_CI to detect when the script is run as part of a GitLab
pipeline. GitLab will add "GITLAB_CI=true" in the environment
variables.
When run as part of $GITLAB_CI, ignore "dirty" worktree to allow to
write "build-each-commit-gcc.log", which can then be grabbed as
artifacts, even when the job timeout. The `git clean` command is
changed to keep those build logs.
When run as part of $GITLAB_CI, we will also store the build output in
a log file instead of writing it to stdout, because GitLab's job log
is limited. But we will write the log to stdout in case of error, so
we can find out more quickly why there's been an error.
This patch also make use of a GitLab feature, "log sections", which we
will collapse by default. One section per commit been built.
There's a bit of colour added to the logs.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Thanks to recent changes added to ImageBuilder to support the bootz
command, which allows obtaining the effective image size (including NOLOAD
sections) from the zImage header, switch the BOOT_CMD for arm32 tests to
bootz. Among other scenarios, this change will enable us, in the future,
to add tests with UBSAN enabled Xen, which would otherwise fail due to
incorrect image placement resulting in overlapping.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
The serial is already setup by the firmware, be consistent with the rest of the
QEMU tests and don't specify a com1 setup.
Note it's also bogus, as the extra ',' will make the intended DPS argument to
be parsed as the io-base.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The gitlab CI webpage seems to have issues displaying the \CR\CR\LF "\r\r\n"
sequence on the web interface used as line returns by the Linux kernel serial
output. This leads to the QEMU tests output looking like:
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input)
(XEN) Freed 664kB init memory
mapping kernel into physical memory
about to get started...
qemu-system-x86_64: terminating on signal 15 from pid 52 (timeout)
This not helpful, so strip the CR characters from the output that goes to
stdout, leaving the output in the serial output file untouched.
All usages of `tee` are adjusted to strip CR from the output.
Fixes: 3030a73bf8 ('automation: add a QEMU based x86_64 Dom0/DomU test')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
If system suspends too quickly, the message for the test controller to
wake up the system may be not sent to the console before suspending.
This will cause the test to timeout.
Fix this by calling sync on the console and waiting a bit after printing
the message. The test controller then resumes the system 30s after the
message, so as long as the delay + suspending takes less time it is
okay.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Checking /proc/interrupts is unreliable because different drivers set
different names there. Install pciutils and use lspci instead.
In fact, the /proc/interrupts content was confusing enough that
adl-pci-hvm had it wrong (MSI-X is in use there). Fix this too.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Passthrough domU console log to the serial console in real time, not
only after the test. First of all, this gives domU console also in case
of test failure. But also, allows correlation between domU and dom0 or
Xen messages.
To avoid ambiguity, add log prefix with 'sed'.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Change automation build script to call the make defconfig target before
setting CONFIG_DEBUG and extra options. This fixes issues on Power where
the build fails without using the ppc64_defconfig.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Run ppc64le tests with the PowerNV machine type (bare metal) instead of
the paravirtualized pseries machine. This requires a more modern version
of QEMU than is present in debian bullseye's repository, so update the
dockerfile to build QEMU from source.
Support for booting on pseries was broken by 74b725a64d ('xen/ppc:
Implement initial Radix MMU support') which resulted in CI failures. In
preparation for removing pseries support entirely, switch the CI
infrastructure to the PowerNV machine type.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
With this patch, ECLAIR jobs will need to be manually
started for "people/.*" pipelines and will not be triggered
if the WTOKEN variable is missing.
This avoids occupying the runner on analyzes that might
not be used by developers.
If developers want to analyze their own repositories
they need to launch them from GitLab.
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Debian unstable used in the Xen containers is actually bookworm.
Switching to bookworm which is now stable means we are not basing our
containers on a moving target anymore.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
It was observed that smoke.serial file (used to store boot logs) is
missing in artifacts of qemu based arm32 jobs. This is because the
artifacts:paths listing smoke.serial specifies paths relative to the
project directory but the qemu-smoke-dom0{less}-arm32.sh scripts create
this file under binaries/. Fix it so that smoke.serial gets created in
project directory just like for every other test job.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Add an initial smoke test that boots xen on a ppc64/pseries machine and
checks for a magic string. Based on the riscv smoke test.
Eventually the powernv9 (POWER9 bare metal) machine type will want to be
tested as well, but for now we only boot on pseries.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jiamei Xie <jiamei.xie@arm.com>
Add two pipelines that analyze an ARM64 and a X86_64 build with the
ECLAIR static analyzer on the guidelines contained in Set1.
The analysis configuration is stored in automation/eclair_analysis.
All commits on the xen-project/xen:staging branch will be analyzed
and their artifacts will be stored indefinitely; the integration will
report differential information with respect to the previous analysis.
All commits on other branches or repositories will be analyzed and
only the last ten artifacts will be kept; the integration will report
differential information with respect to the analysis done on the common
ancestor with xen-project/xen:staging (if available).
Currently the pipeline variable ENABLE_ECLAIR_BOT is set to "n".
Doing so disables the generation of comments with the analysis summary
on the commit threads. The variable can be set to "y" if the a masked
variable named ECLAIR_BOT_TOKEN is set with the impersonation token of
an account with enough privileges to write on all repositories.
Additionaly any repository should be able to read a masked variable
named WTOKEN with the token provided by BUGSENG.
The analysis fails if it contains violations of guidelines tagged as
clean:added. The list of clean guidelines are maintained in
automation/eclair_analysis/ECLAIR/tagging.ecl.
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Since QEMU commit 74a1b256d775 ("configure: Bump minimum Clang version
to 10.0"), or QEMU v8.0, Clang 10.0 is now the minimum to build QEMU.
QEMU 8.0 fails to build on Ubuntu Bionic.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Calling build twice in the same environment will fail because the
directory 'binaries' was already created before. Use mkdir -p to ignore
an existing directory and move on to the actual build.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
This makes the test script easier reusable for different runners, where
console may be connected differently. Include both console= option and
configuration for specific chosen console too (like com1= here) in the
'CONSOLE_OPTS' variable.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Being able to access a real board with real resources gives a great
opportunity to finally test passthroughing devices to guests. Therefore,
create a new Xilinx job to test GEM (Gigabit Ethernet MAC) controller
passthrough to a dom0less domU.
By passing "gem-passthrough" as a test variant, the test will instruct
the ImageBuilder to use "eth0.dtb" (passthrough dtb stored under tftp
server root) as a guest dtb and to add "xen,passthrough" dtb property to
"/amba/ethernet@ff0e0000" node. The guest itself will try to bringup
the network interface, obtain dynamically IP address and ping the default
gateway.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, setting up a network bridge is unconditionally placed
in the dom0 xen.start script. Since we might want to use the network
interface (there is only one working GEM on the board) for other tests
(e.g. passthrough), move the bridge setup to a dom0_check variable being
part of a default ping test (i.e. if no test variant specified).
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add simple PCI passthrough test to both PV and HVM domU. It passes
through a network adapter (the only one in the system), gets an IP via
DHCP (first basic test) and then ping the gateway (second basic test).
Finally, if device is supposed to use MSI or MSI-X (as set in the
PCIDEV_INTR test variable), check if it's in use via /proc/interrupts.
On the current runner, the device in question is this:
03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller I225-V [8086:15f3] (rev 03)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7d25]
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at 50400000 (32-bit, non-prefetchable) [size=1M]
Memory at 50500000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable+ Count=5 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number ...
Capabilities: [1c0] Latency Tolerance Reporting
Capabilities: [1f0] Precision Time Measurement
Capabilities: [1e0] L1 PM Substates
Kernel driver in use: igc
Kernel modules: igc
With the current Xen version, it uses MSI-X under PV and MSI under HVM.
This patch moves domU config to a variable, to make it configurable on
per-test basis. Add also a few comments for visual separation of tests.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The login prompt is printed after all the startup (test) scripts, wait
for that instead of "passed" marker. And only then check if test passed.
Before this patch there was a race: "passed" marker could be already
printed, but the final check would fail because login prompt wasn't
there yet.
Also, modify etc/issue in domU rootfs to avoid confusing the one from
domU with the dom0's one. Use the dom0 one as test end marker.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
As the recent work to get PCI Passthrough testing working shows, putting
`/bin/false` as a ROM into guest context doesn't work so well.
For all ROM paths where we're skipping the build, use a slightly-plausible but
likely non-existent path instead.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
It seems to build just fine with Alpine 3.12, and SeaBIOS is necessary
for a HVM test (that use the Alpine build).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Avoid memory fragmentation that leads to:
(XEN) common/memory.c:277:d0v10 Could not allocate order=9 extent: id=1 memflags=0xc0 (0 of 4)
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
This is a first test using Qubes OS CI infra. The gitlab-runner has
access to ssh-based control interface (control@thor.testnet, ssh key
exposed to the test via ssh-agent) and pre-configured HTTP dir for boot
files (mapped under /scratch/gitlab-runner/tftp inside the container).
Details about the setup are described on
https://www.qubes-os.org/news/2022/05/05/automated-os-testing-on-physical-laptops/
There are two test. First is a simple dom0+domU boot smoke test, similar
to other existing tests. The second is one boots Xen, and try if S3
works. It runs on a ADL-based desktop system. The test script is based
on the Xilinx one.
The machine needs newer kernel than other x86 tests run, so use 6.1.x
kernel added in previous commit.
The usage of fakeroot is necessary to preserve device nodes (/dev/null
etc) when repacking rootfs. The test runs in a rootless podman
container, which doesn't have full root permissions. BTW the same
applies to docker with user namespaces enabled (but it's only opt-in
feature there).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Create 2 new test jobs, called qemu-smoke-dom0less-arm64-gcc-static-shared-mem
and qemu-smoke-dom0less-arm64-gcc-debug-static-shared-mem.
Adjust qemu-smoke-dom0less-arm64.sh script to accomodate the static
shared memory test as a new test variant. The test variant is determined
based on the first argument passed to the script. For testing static
shared memory, the argument is 'static-shared-mem'.
The test configures two dom0less DOMUs with a static shared memory
region and adds a check in the init script.
The check consists in comparing the contents of the /proc/device-tree/reserved-memory
xen-shmem entry with the static shared memory range and id with which
DOMUs were configured. If the memory layout is correct, a message gets
printed by DOMU.
At the end of the qemu run, the script searches for the specific message
in the logs and fails if not found.
Signed-off-by: Jiamei Xie <jiamei.xie@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Create 2 new test jobs, called qemu-smoke-dom0less-arm64-gcc-staticheap
and qemu-smoke-dom0less-arm64-gcc-debug-staticheap.
Add property "xen,static-heap" under /chosen node to enable static-heap.
If the domU can start successfully with static-heap enabled, then this
test pass.
ImageBuillder sets the kernel and ramdisk range based on the file size.
It will use the memory range between 0x45600000 to 0x47AED1E8. It uses
MEMORY_START and MEMORY_END from the cfg file as a range in which it can
instruct u-boot where to place the images.
Change MEMORY_END to 0x50000000 for all test cases.
Signed-off-by: Jiamei Xie <jiamei.xie@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The test prepares dom0 and domU binaries and boot artifacts, similarly
to the existing QEMU test. (TBD: share preparation steps with the
regular QEMU tests.)
However, instead of running the test inside QEMU as usual, it copies
the binaries to the tftp server root, triggers a Xilinx ZCU102 board
reboot, and connects to the real serial of the board.
Only run the job on protected branches with XILINX_JOBS set to true (the
"master" and "staging" on gitlab.com/xen-project/xen qualify).
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Add missing aliases for:
- debian:unstable-cppcheck
- debian:unstable-arm64v8-arm32-gcc
- ubuntu:bionic
Remove aliases for no longer used containers:
- centos:7.2
- debian:unstable-arm32-gcc
Modify docs to refer to CentOS 7 instead of 7.2 not to create confusion.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Add a debian container with cppcheck installation routine inside,
capable of performing cppcheck analysis on Xen-only build including
cross-builds for arm32 and x86_64.
Populate build jobs making use of that container to run cppcheck
analysis to produce a text report (xen-cppcheck.txt) containing the list
of all the findings.
This patch does not aim at performing any sort of bisection. Cppcheck is
imperfect and for now, our goal is to at least be aware of its reports,
so that we can compare them with the ones produced by better tools and
to be able to see how these reports change as a result of further
infrastructure improvements (e.g. exception list, rules exclusion).
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
As part of the arm32 dom0 test, also create a simple domU using xl. To
do that, we need the toolstack installed in the dom0 rootfs. We switch
to using the kernel and rootfs built by the Yocto arm32 job.
Remove the PCI node from the host device tree: it is unused but causes a
Linux hang at boot.
Use xen-watchdog to trigger the domU creation for convience
(/etc/local.d is not handled by rootfs.)
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Use a single fairly generic string as the "all done" message to look for,
which avoids the need to patch qemu-smoke-riscv64.sh each time a new feature
is added.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Add a new test job qemu-smoke-dom0less-arm32-gcc-without-dom0 in debug
and non-debug variant that will execute qemu-smoke-dom0less-arm32.sh
script to test dom0less domU boot without dom0 (i.e. true dom0less
configuration).
By passing "without-dom0" as a test variant, the test will clear the
dom0 prompt that we grep for as a last step and remove all the DOM0
related options in ImageBuilder configuration.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Xen supports booting gzip compressed kernels, therefore add a new test
job qemu-smoke-dom0less-arm32-gcc-gzip in debug and non-debug variant
that will execute qemu-smoke-dom0less-arm32.sh script to test booting
a domU with a gzip compressed kernel image (in our case zImage).
By passing "gzip" as a test variant, the test will call gzip command
to compress kernel image and use it in ImageBuilder configuration for
domU1. No need for a specific check to be executed from domU. Being able
to see a test message from a boot log is sufficient to mark a test as
passed.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add a new test job qemu-smoke-dom0less-arm32-gcc-staticmem in debug
and non-debug variant that will execute qemu-smoke-dom0less-arm32.sh
script to test static memory allocation feature. The test case itself
is directly taken from dom0less arm64 testing.
Populate build jobs to compile Xen with config options necessary to
enable static memory feature. Populate test jobs passing "static-mem"
as a test variant. The test configures domU with a static memory region
(direct-mapped) and adds a check using /proc/iomem to determine the
memory region marked as "System RAM".
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, we only perform a single arm32 test in our CI, checking
whether dom0 boots successfully or not. This is mostly because we do not
have any arm32 runners and we only execute a hypervisor only build.
In order not to leave the arm32 testing in such a poor state, add a
script qemu-smoke-dom0less-arm32.sh to start testing dom0less
configuration, while keeping dom0 to make the test more interesting.
The script is mostly based on the one used for dom0 arm32 testing as well
as the one used for dom0less arm64 testing. We obtain Debian Bullseye
kernel and Alpine Linux busybox-based rootfs. Depending on the test
variant, we prepare a test case contained within domU_check variable,
that will be executed as part of /init script from domU rootfs.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add check if there is a message 'Hello from C env' presents
in log file to be sure that stack is set and C part of early printk
is working.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
At the moment, the static-mem check relies on the way Xen exposes the
memory banks in device tree. As this might change, the check should be
modified to be generic and not to rely on device tree. In this case,
let's use /proc/iomem which exposes the memory ranges in %08x format
as follows:
<start_addr>-<end_addr> : <description>
This way, we can grep in /proc/iomem for an entry containing memory
region defined by the static-mem configuration with "System RAM"
description. If it exists, mark the test as passed. Also, take the
opportunity to add 0x prefix to domu_{base,size} definition rather than
adding it in front of each occurence.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
There's no need to do ad-hoc string parsing. Use grep -q instead.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Anthony PERARD
Michal Orzel
Roger Pau Monne
Marek Marczykowski-Górecki
Shawn Anastasio
Simone Ballarin
Stefano Stabellini
Shawn Anastasio
Olaf Hering
Andrew Cooper
Jiamei Xie
Oleksii Kurochko