Right now on migrate/resume, all guest memory is allocated with 4k
small pages. This was an intended oversight in the original Migration
v2 implementation.
With some test memory program stressing TLB (many small random memory
accesses) superpages can show a 15% performance improvement.
On the first memory iteration the sender is currently sending memory
in 4MB aligned chunks of GFN space which allows the receiver to
allocate most pages as 2MB superpages instead of single 4KB pages.
This change does not handle 1GB superpages as this will require
changes to the migration protocol.
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
We extract cppc info from "struct xen_get_cpufreq_para", where it acts as
a member of union, and share the space with governor info.
However, it may fail in amd-cppc passive mode, in which governor info and
CPPC info could co-exist, and both need to be printed together via xenpm tool.
If we tried to still put it in "struct xen_get_cpufreq_para" (e.g. just move
out of union), "struct xen_get_cpufreq_para" will enlarge too much to further
make xen_sysctl.u exceed 128 bytes.
So we introduce a new sub-field GET_CPUFREQ_CPPC to dedicatedly acquire
CPPC-related para, and make get-cpufreq-para invoke GET_CPUFREQ_CPPC
if available.
New helpers print_cppc_para() and get_cpufreq_cppc() are introduced to
extract CPPC-related parameters process from cpufreq para.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com> # hypervisor
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Callers observing errors elsewhere may be confused by the ENOSYS that
the Flask operation would yield on a Flask-disabled hypervisor.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Dom0 is never started in PoD mode, and hence it can at "best" do harm if
we try to set a PoD target for it.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
The commit 3e322bef8b ("xen/arm: firmware: Add SCMI over SMC calls
handling layer") introduces simple driver which forwards SCMI over SMC
calls from hwdom/dom0 to EL3 firmware (TF-A) with a single SCMI OSPM agent
support. While it is working gracefully for hwdom/dom0 use case it doesn't
cover "thin Dom0 with guest domain, which serves as Driver domain"
use-case. In this case HW need to be enable in Driver domain and dom0 is
performing only control functions.
The EL3 SCMI firmware (TF-A) with a single SCMI OSPM agent support is
pretty generic case for the default vendors SDK and new platforms.
This patch enables passthrough of SCMI SMC single agent interface to the
one guest domain serving as Driver domain.
Configure Dom0 to enable SCMI passthrough:
- dom0: add scmi-smc-passthrough to the Xen Command Line
Enabled SCMI passthrough for guest using toolstack in the following way:
- domD: xl.cfg add "arm_sci" option as below
arm_sci = "type=scmi_smc"
- domD: xl.cfg enable access to the "arm,scmi-shmem"
iomem = [
"47ff0,1@22001",
]
- domD: add SCMI nodes to the Driver domain partial device tree as in the
below example:
passthrough {
scmi_shm_0: sram@22001000 {
compatible = "arm,scmi-shmem";
reg = <0x0 0x22001000 0x0 0x1000>;
};
firmware {
compatible = "simple-bus";
scmi: scmi {
compatible = "arm,scmi-smc";
shmem = <&scmi_shm_0>;
...
}
}
}
dom0less case configuration:
- add "xen,sci_type" property for required DomU ("xen,domain") node
xen,sci_type="scmi_smc"
- add scmi nodes to the Driver domain partial device tree the same way
as above and enable access to the "arm,scmi-shmem" according to
dom0less documentation. For example:
scmi_shm_0: sram@22001000 {
compatible = "arm,scmi-shmem";
reg = <0x00 0x22001000 0x00 0x1000>;
-> xen,reg = <0x0 0x47ff0000 0x0 0x1000 0x0 0x22001000>;
-> xen,force-assign-without-iommu;
};
The SCMI SMC single agent interface can be enabled for one and only one
domain. In general, the configuration is similar to any other HW
passthrough, except explicitly enabling SCMI with "arm_sci" xl.cfg option.
Note that "arm,scmi-smc" and "arm,scmi-shmem" nodes will be removed from
dom0/hwdom DT when "scmi-smc-passthrough" cmdline parameter was provided.
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech> # tools
Move xc_bitops.h to common tools location to be shared between
the toolstack and unit test code.
Adjust the guard in xen-tools/bitops.h
Correct the #include directives and comments referring to the old
xc_bitops.h in the toolstack code.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
In `xenpm get-cpufreq-para <cpuid>`, ->freq_num and ->cpu_num checking are
tied together via variable "has_num", while ->freq_num only has non-zero value
when cpufreq driver in legacy P-states mode.
So we drop the "has_num" condition check, and mirror the ->gov_num check for
both ->freq_num and ->cpu_num in xc_get_cpufreq_para().
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
This commit activates the previously introduced altp2m_count parameter,
establishing the connection between libxl and Xen.
Signed-off-by: Petr Beneš <w1benny@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Add a guest config parameter "xenstore_feature_mask" allowing to limit
the Xenstore features the guest can see and use. This can be needed in
order to allow migrating a guest to a host running a Xenstore version
providing less features than the source host.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Nick Rosbrook <enr0n@ubuntu.com> # tools/golang
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
When removing qemu-trad support, libxl__domain_build_info_setdefault()
was modified to only allow qemu-xen as a device model. This change
resulted in an error at domain creation when qemu-xen isn't there.
As this is a perfectly fine situation for PV and PVH guests without
any qemu based backends, handle this case gracefully.
Fixes: 19ab8356ab ("tools: remove support for running a guest with qemu-traditional")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
In order to reactivate an event channel after kexec() of Mini-OS,
libxenevtchn needs to allocate the port data for the event channel
and set the handler again. Add a new interface xenevtchn_bind()
for that purpose, available under Mini-OS only.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
With Mini-OS now supporting the O_CLOEXEC flag for the kexec case,
set the related cloexec flag in minios.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
With Mini-OS now supporting O_CLOEXEC for the kexec case, no longer
ignore the XENEVTCHN_NO_CLOEXEC flag in minios.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Add an additional "caps" argument to the libxenmanage functions to
obtain a domains capabilities - control, hardware, and xenstore.
Update the xenstored callers at the same time.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Hypercalls are not free; cache colouring is an experimental feature, and
ignoring an -EOPNOTSUPP is bad form.
Now that Xen has been fixed to initialise colouring information correctly for
domains, xc_domain_set_llc_colors() only needs calling for domains with
explicit configuration.
Rearrange the logic to avoid the hypercall in the general case, leaving a
comment explaining why it is performed so early.
Fixes: 748bd725fb ("tools: add support for cache coloring configuration")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add functions for getting and setting Xenstore features to libxenstore:
xs_get_features_supported(): return the features supported by the
running Xenstore implementation as defined in xs_wire.h via the
XENSTORE_SERVER_FEATURE_* macros.
xs_get_features_domain(): return the features offered for a specific
domain.
xs_set_features_domain(): set the features available for a specific
domain.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Introduce a new altp2m_count parameter to control the maximum number of altp2m
views a domain can use. By default, if altp2m_count is unspecified and altp2m
is enabled, the value is set to 10, reflecting the legacy behavior.
This change is preparatory; it establishes the groundwork for the feature but
does not activate it.
Signed-off-by: Petr Beneš <w1benny@gmail.com>
Acked-by: Nick Rosbrook <enr0n@ubuntu.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Introduce a new altp2m_count parameter to control the maximum number of altp2m
views a domain can use. By default, if altp2m_count is unspecified and altp2m
is enabled, the value is set to 10, reflecting the legacy behavior.
This change is preparatory; it establishes the groundwork for the feature but
does not activate it.
Signed-off-by: Petr Beneš <w1benny@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Nick Rosbrook <enr0n@ubuntu.com>
Encapsulate the altp2m options within a struct. This change is preparatory
and sets the groundwork for introducing additional parameter in subsequent
commit.
Signed-off-by: Petr Beneš <w1benny@gmail.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Julien Grall <jgrall@amazon.com> # arm
Reviewed-by: Jan Beulich <jbeulich@suse.com> # hypervisor
With introduction of the new byteswap infrastructure the build of
libxenguest for stubdoms was broken. Fix that again.
Fixes: 60dcff871e ("xen/decompressors: Remove use of *_to_cpup() helpers")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
The Xen platform PCI device (vendor ID 0x5853) exposed to x86 HVM guests
doesn't have the functionality of a traditional PCI device. The exposed
MMIO BAR is used by some guests (including Linux) as a safe place to map
foreign memory, including the grant table itself.
Traditionally BARs from devices have the uncacheable (UC) cache attribute
from the MTRR, to ensure correct functionality of such devices. hvmloader
mimics this behavior and sets the MTRR attributes of both the low and high
PCI MMIO windows (where BARs of PCI devices reside) as UC in MTRR.
This however causes performance issues for users of the Xen platform PCI
device BAR, as for the purposes of mapping remote memory there's no need to
use the UC attribute. On Intel systems this is worked around by using
iPAT, that allows the hypervisor to force the effective cache attribute of
a p2m entry regardless of the guest PAT value. AMD however doesn't have an
equivalent of iPAT, and guest PAT values are always considered.
Linux commit:
41925b105e34 xen: replace xen_remap() with memremap()
Attempted to mitigate this by forcing mappings of the grant-table to use
the write-back (WB) cache attribute. However Linux memremap() takes MTRRs
into account to calculate which PAT type to use, and seeing the MTRR cache
attribute for the region being UC the PAT also ends up as UC, regardless of
the caller having requested WB.
As a workaround to allow current Linux to map the grant-table as WB using
memremap() introduce an xl.cfg option (xen_platform_pci_bar_uc=0) that can
be used to select whether the Xen platform PCI device BAR will have the UC
attribute in MTRR. Such workaround in hvmloader should also be paired with
a fix for Linux so it attempts to change the MTRR of the Xen platform PCI
device BAR to WB by itself.
Overall, the long term solution would be to provide the guest with a safe
range in the guest physical address space where mappings to foreign pages
can be created.
Some vif throughput performance figures provided by Anthoine from a 8
vCPUs, 4GB of RAM HVM guest(s) running on AMD hardware:
Without this patch:
vm -> dom0: 1.1Gb/s
vm -> vm: 5.0Gb/s
With the patch:
vm -> dom0: 4.5Gb/s
vm -> vm: 7.0Gb/s
Reported-by: Anthoine Bourgeois <anthoine.bourgeois@vates.tech>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Oleksii Kurochko<oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com> # hvmloader
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
When a device is passed through to a xl domU, the iomem ranges may
overlap with the extended regions. Remove iomem from extended regions.
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Add a per-domain way to optionally disable traps for accesses
to unmapped addresses.
The domain flag is general but it's only implemented for Arm for now.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
xc_pm_get_pxstat() requires the caller to allocate the pt and trans_pt
buffers but then calls xc_pm_get_max_px() to determine how big they are
(and hence how much Xen will copy into them). This is susceptible to
races if xc_pm_get_max_px() changes so avoid the problem by requiring
the caller to also pass in the size of the buffers.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Remove the code in tools for running a guest with qemu-traditional.
This covers xl, libxl, libacpi, hvmloader and the related python and
go bindings.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com> # hvmloader
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Only access the HVM union b_info->u.hvm on HVM guests. The union
access is not guarded, so this reads and sets the default even on
non-HVM guests. Usually this doesn't matter as PV and PVH unions are
smaller and zero-initialized, but the zero default will be re-written as
a -1 boolean. Generally, it could incorrectly set b_info->altp2m
through aliased data.
Fixes: 0291089f6e ("xen: enable altp2m at create domain domctl")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
The livepatch list sysctl writes metadata into a buffer provided by the
caller. The caller is expected to allocate an appropriately sized buffer
but this is racy and may result in Xen writing beyond the end of the
buffer should the metadata size change.
The name buffer is expected to be an array of elements with size
XEN_LIVEPATCH_NAME_SIZE to avoid this kind of race but the xen-livepatch
tool allocates only as many bytes as needed, therefore encountering the
same potential race condition.
Fix both these issues by requiring the caller to pass in the size of the
name and metadata buffers and then not writing beyond the allocated
size.
The sysctl interface version is bumped due to the change in semantics of
the fields.
Signed-off-by: Kevin Lampis <kevin.lampis@cloud.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Fixes: b145b4a39c ('livepatch: Handle arbitrary size names with the list operation')
Fixes: 5083e0ff93 ('livepatch: Add metadata runtime retrieval mechanism')
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
The PCI device irq is read with fscanf(%u). Switch the irq variable to
unsigned int to match.
Linux driver/pci/pci-sysfs.c:irq_show() uses %u to print the value.
However, unsigned int irq doesn't compile because of:
error: pointer targets in passing argument 4 of 'xc_physdev_map_pirq' differ in signedness [-Werror=pointer-sign]
Add int pirq to provide the desired type instead of re-using irq.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
A PCI device's irq field is an 8-bit number. A value of 0xff indicates
that the device IRQ is not connected. Additionally, the Linux ACPI code
can convert these 0xff values to IRQ_NOTCONNECTED(0x80000000) because
"0x80000000 is guaranteed to be outside the available range of
interrupts and easy to distinguish from other possible incorrect
values." When the hypercall to assign that IRQ fails, device
passthrough as a whole fails.
Add checking for a valid IRQ and skip the IRQ handling for PCI devices
outside that range. This allows for passthrough of devices without
legacy IRQs.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
`QEMU_XEN_PATH` will be configured as `qemu-system-i386` with no clue where, if
`--with-system-qemu` is set without giving a path (as matched in the case `yes`
but not `*`). However, the existence of the executable is checked by `access()`,
that will not look for anywhere in $PATH but the current directory. And since it
is possible for `qemu-system-i386` (or any other configured values) to be
executed from PATH later, we'd better find that in PATH and return the full path
for the caller to check against.
Signed-off-by: Hongbo <hehongbo@mail.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
[Initialise `saveptr` to NULL]
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
These wrappers simply hide a deference, which adds to the cognitive complexity
of reading the code. As such, they're not going to be included in the new
byteswap infrastructure.
No functional change.
Signed-off-by: Lin Liu <lin.liu@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
From their introduction all xc_hypercall_bounce_pre() uses, when they
failed, would properly cause exit from the function including cleanup,
yet without informing the caller of the failure. Purge the unlock_1
label for being both pointless and mis-named.
An earlier attempt to switch to the usual split between return value and
errno wasn't quite complete.
HWP work made the cleanup of the "available governors" array
conditional, neglecting the fact that the condition used may not be the
condition that was used to allocate the buffer (as the structure field
is updated upon getting back EAGAIN). Since cleanup can be done even if
no buffer was allocated, drop the conditional there again.
Fixes: 4513025a87 ("libxc: convert sysctl interfaces over to hypercall buffers")
Amends: 73367cf3b4 ("libxc: Fix xc_pm API calls to return negative error and stash error in errno")
Fixes: 31e264c672 ("pmstat&xenpm: Re-arrage for cpufreq union")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Now that common-macros.h has STR() available, which is even slightly
more flexible, use that and drop the custom macros.
No difference in generated code (except for line numbers, of course,
where embedded in code/data).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
`QEMU_XEN_PATH` will be configured as `qemu-system-i386` with no clue where, if
`--with-system-qemu` is set without giving a path (as matched in the case `yes`
but not `*`). However, the existence of the executable is checked by `access()`,
that will not look for anywhere in $PATH but the current directory. And since it
is possible for `qemu-system-i386` (or any other configured values) to be
executed from PATH later, we'd better find that in PATH and return the full path
for the caller to check against.
Signed-off-by: Hongbo <hehongbo@mail.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
It makes no sense to request for preprocessor only output and also request
object file generation. Fix the _libxl.api-for-check target to only use
-E (preprocessor output).
Also Clang 20.0 reports an error if both options are used.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Fixes: 2862bf5b6c ('libxl: enforce prohibitions of internal callers')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
We are missing a way to detect whether a user provided a value for
nr_spis equal to 0 or did not provide any value (default is also 0) which
can cause issues when calculated nr_spis is > 0 and the value from domain
config is 0. Fix it by setting default value for nr_spis to newly added
LIBXL_NR_SPIS_DEFAULT i.e. UINT32_MAX (max supported nr of SPIs is 960
anyway).
Fixes: 55d62b8d46 ("tools/arm: Reject configuration with incorrect nr_spis value")
Reported-by: Luca Fancellu <luca.fancellu@arm.com>
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Commit cefeffc7e5 marked ACPI tables as NVS in the hvmloader path
because SeaBIOS may otherwise just mark it as RAM. There is, however,
yet another reason to do it even in the PVH path. Xen's incarnation of
AML relies on having access to some ACPI tables (e.g: _STA of Processor
objects relies on reading the processor online bit in its MADT entry)
This is problematic if the OS tries to reclaim ACPI memory for page
tables as it's needed for runtime and can't be reclaimed after the OSPM
is up and running.
Fixes: de6d188a51 ("hvmloader: flip "ACPI data" to "ACPI NVS" type for ACPI table region)"
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
A PCI device may not have a legacy IRQ. In that case, we don't need to
do anything, so don't fail in libxl__arch_hvm_map_gsi() and
libxl__arch_hvm_unmap_gsi().
Requires an updated pciback to return -ENOENT.
Fixes: f97f885c71 ("tools: Add new function to do PIRQ (un)map on PVH dom0")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
It is valid for a PCI device to not have a legacy IRQ. In that case, do
not print an error to keep the logs clean.
This relies on pciback being updated to return -ENOENT for a missing
GSI.
Fixes: b93e5981d2 ("tools: Add new function to get gsi from dev")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Infinitely retrying the rmdir() invocation makes little sense. While the
original observation was the log filling the disk (due to repeated
"Directory not empty" errors, in turn occurring for unclear reasons),
the loop wants breaking even if there was no error message being logged
(much like is done in the similar loops in libxl__remove_file() and
libxl__remove_file_or_directory()).
Fixes: c4dcbee67e ("libxl: provide libxl__remove_file et al")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
If the calculated value for nr_spis by the toolstack is bigger than the
value provided by the user, we silently ignore the latter. This is not
consistent with the approach we have in Xen on Arm when we try to reject
incorrect configuration. Also, the documentation for nr_spis is
incorrect as it mentions 991 as the number of max SPIs, where it should
be 960 i.e. (1020 - 32) rounded down to the nearest multiple of 32.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
xs_get_domain_path() can be simplified by using single_with_domid().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Frediano Ziglio