hypervisor about memory changes.
The impact on disk performance is typically making it from 71.5MBps
down to 70.5Mbps during the live migration. The impact on network
performance is actually even hard to measure.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
Domctl interface is extended to allow libxc retrieve device group
information from hypervisor. Vendor-specific iommu_ops is also
extended by adding a new operation "get_device_group_id()", which is
currently a null pointer but could be implemented later for vt-d.
Error will be raised from tools side when user trying to assign PCI
device with a sibling device being driven by dom0. User will keep
being prompted until he has hidden the entire device group (at least,
the sibling devices driven by dom0) in dom0 kernel
parameter. Hopefully this framework could be flexible enough to
support both amd iommu and vt-d.
The following 2 cases are not covered by this patch, but should be
easy to handle.
* Checking for hot-plug devices (maybe we can delay calling
ImageHandler.signalDeviceModel() until all checks are done?)
* Checking for splitted device group between different passthru
domains
Signed-off-by: Wei Wang <wei.wang2@amd.com>
Implement statistic interface for cx via sysctl & libxc. Provide a
easy way to collect processor cx info within dom0.
Signed-off-by: Wei Gang <gang.wei@intel.com>
Sampling and collecting dynamic Px statistic data, including
Px state value, Px count, Px residency time, Px transition
matrix, etc. Provide Px statistic data to user through libxc.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
This adds a new HVM op that enables tracking dirty bits of a range of
video RAM. The idea is to optimize just for the most common case
(only one guest mapping, with sometimes some temporary other
mappings), which permits to keep the overhead on shadow as low as
possible.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
Currently it only inercept access to MSI config space, no MSI-x support.
Signed-off-by: Jiang Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Shan Haitao <haitao.shan@intel.com>
CPUID's replies are now pre-calculated in libxc and given to the
hypervisor via a new domctl.
There are two parts to this feature:
- We can overwrite cpuid's replies.
- We can check that a vm is compatible with a host's processor.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
This patch adds the ability to set the number of slots that may be
used for mapping grant references, using the gntdev user-space grant
reference mapping driver.
Signed-off-by: Derek Murray <Derek.Murray@cl.cam.ac.uk>
** Currently only 2 virtual hotplug pci slots(6~7) are created so more
than 2 vtd dev can't be hotplugged, but we can easily extend it in
future.
Three new commands are added:
"xm pci-list domid" show the current assigned vtd device, like:
VSlt domain bus slot func
0x6 0x0 0x02 0x00 0x0
"xm pci-detach" hot remove the specified vtd device by the virtual
slot, like:
xm pci-detach EdwinHVMDomainVtd 6
"xm pci-attach DomainID dom bus dev func [vslot]" hot add a new vtd
device in the vslot. If no vslot specified, a free slot will be picked
up. e.g. to insert '0000:03:00.0':
xm pci-attach EdwinHVMDomainVtd 0 3 0 0
** guest pci hotplug
linux: pls. use 2.6.X and enable ACPI PCI hotplug ( Bus options=> PCI
hotplug => ACPI PCI hotplug driver )
windows: 2000/xp/2003/vista are all okay
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
mb/rmb/wmb. Instead add a xen_ prefix. Modify Xen's public headers to
expect the prefixed names instead of bare mb/rmb/wmb, but gate this
expectation on a bump of __XEN_INTERFACE_VERSION__.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Stubdomains (and probably other domain disagregation elements too)
need to be able to tinker with another domain. This adds IS_PRIV_FOR
that extends IS_PRIV by allowing domains to have privileges over a
given "target" domain. XEN_DOMCTL_set_target permits to set this
"target". A new 'target' configuration option makes the domain builder
use it.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
This makes use of the domain config option guest_os_type for
ia64 and removes the backing for the previous ACPI based
mechanism used previously. A user wanting optimal performance
for a specific type of OS guest running in an HVM domain should
make use of this new option. See updated xmexmaple.vti for
available options. All supported OSes should always work using
the default option or leaving the option unspecified. Originally
based on patch from Zhang Xin.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
guests. Use this to pin virtual framebuffer VRAM as attribute WB, even
if guest tries to map with other attributes.
Signed-off-by: Disheng Su <disheng.su@intel.com>
I have added CONFIG_PASSTHROUGH in ioemu/Makefile.target and
ioemu/hw/pc.c in attached vtd_tools2.patch. This should turn off
libpci usage by default until user specifically enables it.
This can be safely check-in without breaking builds for people who do
not care about pass-through devices. I will try to think of a better
way to enable this.
Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Signed-off-by: Guy Zana <guy@neocleus.com>
xc_map_foreign_batch() can succeed partially. It is awkward to use
when you're only interested in complete success. Provide new
xc_map_foreign_pages() convenience function for that kind of use.
Also convert two obvious calls to use it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
functionality is needed for probing how much memory is available in a
given node prior to VM creation.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Keir Fraser <keir@xensource.com>
Not working yet as we are a bit too keen to kill the qemu-dm process,
before we know that the save has been successful.
Signed-off-by: Keir Fraser <keir@xensource.com>
added PFN-GMFN table for non-auto translated physmap
added PFN table for auto translated physmap.
HVM domain support.
IA64 support
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Use the guest's own p2m table instead of xc_get_pfn_list(), which
cannot handle PFNs with no MFN.
Dump a zeroed page for PFNs with no MFN.
Clearly deprecate xc_get_pfn_list().
Do not include a P2M table with HVM domains.
Refuse to dump HVM until we can map its pages with PFNs.
Signed-off-by: John Levon <john.levon@sun.com>
Keir Fraser
Alex Williamson
Keir Fraser
kfraser@localhost.localdomain
Steven Hand
Ewan Mellor
Tim Deegan