This tests if QEMU works in PVH dom0. QEMU in dom0 requires enabling TUN
in the kernel, so do that too.
Add it to both x86 runners, similar to the PVH domU test.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Release-Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
At the moment, all the Arm64 Qemu tests use GICv2 which is the default
GIC version used by Qemu. Improve the coverage by adding a new test in
which Qemu will be configured to have GICv3.
Rename host device tree name to "virt.dtb" to be GIC version agnostic.
Use "gic-version" Qemu option to select the version to use. Unless the
test variant is set to "gicv3", version 2 will be used.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Introduce qemu based Arm earlyprintk test and build jobs to cover this
feature in debug variant. The tests simply check for the presence of the
last message printed by the bootstrap code before entering the C world.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
To save some bandwith that can be later on used to increase the test
coverage by adding new tests, drop the following non-debug test/build
jobs existing in both debug and non-debug variants:
- static memory (arm64, arm32)
- static shared memory (arm64)
- static heap (arm64)
- boot cpupools (arm64)
- gzip (arm32)
More generic tests existing in both variants were left unmodified.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Current issues with this test are:
- when the job timeout, the log file is lost as there is no chance to
run the `mv` command.
- GitLab job log is limited in size, so one usually have to download
the artifacts, which may be missing.
Use $GITLAB_CI to detect when the script is run as part of a GitLab
pipeline. GitLab will add "GITLAB_CI=true" in the environment
variables.
When run as part of $GITLAB_CI, ignore "dirty" worktree to allow to
write "build-each-commit-gcc.log", which can then be grabbed as
artifacts, even when the job timeout. The `git clean` command is
changed to keep those build logs.
When run as part of $GITLAB_CI, we will also store the build output in
a log file instead of writing it to stdout, because GitLab's job log
is limited. But we will write the log to stdout in case of error, so
we can find out more quickly why there's been an error.
This patch also make use of a GitLab feature, "log sections", which we
will collapse by default. One section per commit been built.
There's a bit of colour added to the logs.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Switch tests using Stretch to Bookworm, as Stretch is EOL.
Note the packages are not removed from the Stretch dockerfile, because the
tests in stable branches will run using the old containers.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Checking /proc/interrupts is unreliable because different drivers set
different names there. Install pciutils and use lspci instead.
In fact, the /proc/interrupts content was confusing enough that
adl-pci-hvm had it wrong (MSI-X is in use there). Fix this too.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Run ppc64le tests with the PowerNV machine type (bare metal) instead of
the paravirtualized pseries machine. This requires a more modern version
of QEMU than is present in debian bullseye's repository, so update the
dockerfile to build QEMU from source.
Support for booting on pseries was broken by 74b725a64d ('xen/ppc:
Implement initial Radix MMU support') which resulted in CI failures. In
preparation for removing pseries support entirely, switch the CI
infrastructure to the PowerNV machine type.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
On failure of "build"-each-commit script, the next command that move
the log back into the build directory isn't executed. Fix that by
using "after_script" which is always executed even if the main
"script" fails. (We would still miss the log when the jobs times out.)
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This patch avoids the execution of pipelines in the
following branches:
- master
- smoke
- coverirty-tested/.*
- stable-.*
The job-level exclusions have been removed as they are
pointless with this new workspace-level exclusion.
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add an initial smoke test that boots xen on a ppc64/pseries machine and
checks for a magic string. Based on the riscv smoke test.
Eventually the powernv9 (POWER9 bare metal) machine type will want to be
tested as well, but for now we only boot on pseries.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jiamei Xie <jiamei.xie@arm.com>
This adds another physical runner to Gitlab-CI, running similar set of
jobs that the Adler Lake one.
The machine specifically is
MinisForum UM773 Lite with AMD Ryzen 7 7735HS
The PV passthrough test is skipped as currently it fails on this system
with:
(d1) Can't find new memory area for initrd needed due to E820 map conflict
The S3 test is skipped as it currently fails - the system seems to
suspend properly (power LED blinks), but when woken up the power LED
gets back to solid on and the fan spins at top speed and but otherwise there is no
signs of if life from the system (no output on the console, HDMI or
anything else).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This makes the test script easier reusable for different runners, where
console may be connected differently. Include both console= option and
configuration for specific chosen console too (like com1= here) in the
'CONSOLE_OPTS' variable.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Being able to access a real board with real resources gives a great
opportunity to finally test passthroughing devices to guests. Therefore,
create a new Xilinx job to test GEM (Gigabit Ethernet MAC) controller
passthrough to a dom0less domU.
By passing "gem-passthrough" as a test variant, the test will instruct
the ImageBuilder to use "eth0.dtb" (passthrough dtb stored under tftp
server root) as a guest dtb and to add "xen,passthrough" dtb property to
"/amba/ethernet@ff0e0000" node. The guest itself will try to bringup
the network interface, obtain dynamically IP address and ping the default
gateway.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add simple PCI passthrough test to both PV and HVM domU. It passes
through a network adapter (the only one in the system), gets an IP via
DHCP (first basic test) and then ping the gateway (second basic test).
Finally, if device is supposed to use MSI or MSI-X (as set in the
PCIDEV_INTR test variable), check if it's in use via /proc/interrupts.
On the current runner, the device in question is this:
03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller I225-V [8086:15f3] (rev 03)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7d25]
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at 50400000 (32-bit, non-prefetchable) [size=1M]
Memory at 50500000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable+ Count=5 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number ...
Capabilities: [1c0] Latency Tolerance Reporting
Capabilities: [1f0] Precision Time Measurement
Capabilities: [1e0] L1 PM Substates
Kernel driver in use: igc
Kernel modules: igc
With the current Xen version, it uses MSI-X under PV and MSI under HVM.
This patch moves domU config to a variable, to make it configurable on
per-test basis. Add also a few comments for visual separation of tests.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This should give a lot more useful information in case of a failure, and
also enable some asserts for extra checks.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This is a first test using Qubes OS CI infra. The gitlab-runner has
access to ssh-based control interface (control@thor.testnet, ssh key
exposed to the test via ssh-agent) and pre-configured HTTP dir for boot
files (mapped under /scratch/gitlab-runner/tftp inside the container).
Details about the setup are described on
https://www.qubes-os.org/news/2022/05/05/automated-os-testing-on-physical-laptops/
There are two test. First is a simple dom0+domU boot smoke test, similar
to other existing tests. The second is one boots Xen, and try if S3
works. It runs on a ADL-based desktop system. The test script is based
on the Xilinx one.
The machine needs newer kernel than other x86 tests run, so use 6.1.x
kernel added in previous commit.
The usage of fakeroot is necessary to preserve device nodes (/dev/null
etc) when repacking rootfs. The test runs in a rootless podman
container, which doesn't have full root permissions. BTW the same
applies to docker with user namespaces enabled (but it's only opt-in
feature there).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
It will be used in tests added in subsequent patches.
Enable config options needed for those tests.
While at it, migrate all the x86 tests to the newer kernel, and
introduce x86-64-test-needs to allow deduplication later (for now it's
used only once).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Create 2 new test jobs, called qemu-smoke-dom0less-arm64-gcc-static-shared-mem
and qemu-smoke-dom0less-arm64-gcc-debug-static-shared-mem.
Adjust qemu-smoke-dom0less-arm64.sh script to accomodate the static
shared memory test as a new test variant. The test variant is determined
based on the first argument passed to the script. For testing static
shared memory, the argument is 'static-shared-mem'.
The test configures two dom0less DOMUs with a static shared memory
region and adds a check in the init script.
The check consists in comparing the contents of the /proc/device-tree/reserved-memory
xen-shmem entry with the static shared memory range and id with which
DOMUs were configured. If the memory layout is correct, a message gets
printed by DOMU.
At the end of the qemu run, the script searches for the specific message
in the logs and fails if not found.
Signed-off-by: Jiamei Xie <jiamei.xie@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Create 2 new test jobs, called qemu-smoke-dom0less-arm64-gcc-staticheap
and qemu-smoke-dom0less-arm64-gcc-debug-staticheap.
Add property "xen,static-heap" under /chosen node to enable static-heap.
If the domU can start successfully with static-heap enabled, then this
test pass.
ImageBuillder sets the kernel and ramdisk range based on the file size.
It will use the memory range between 0x45600000 to 0x47AED1E8. It uses
MEMORY_START and MEMORY_END from the cfg file as a range in which it can
instruct u-boot where to place the images.
Change MEMORY_END to 0x50000000 for all test cases.
Signed-off-by: Jiamei Xie <jiamei.xie@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The test prepares dom0 and domU binaries and boot artifacts, similarly
to the existing QEMU test. (TBD: share preparation steps with the
regular QEMU tests.)
However, instead of running the test inside QEMU as usual, it copies
the binaries to the tftp server root, triggers a Xilinx ZCU102 board
reboot, and connects to the real serial of the board.
Only run the job on protected branches with XILINX_JOBS set to true (the
"master" and "staging" on gitlab.com/xen-project/xen qualify).
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
As part of the arm32 dom0 test, also create a simple domU using xl. To
do that, we need the toolstack installed in the dom0 rootfs. We switch
to using the kernel and rootfs built by the Yocto arm32 job.
Remove the PCI node from the host device tree: it is unused but causes a
Linux hang at boot.
Use xen-watchdog to trigger the domU creation for convience
(/etc/local.d is not handled by rootfs.)
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
We are going to use artifacts produced by the Yocto builds in test jobs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Add a new test job qemu-smoke-dom0less-arm32-gcc-without-dom0 in debug
and non-debug variant that will execute qemu-smoke-dom0less-arm32.sh
script to test dom0less domU boot without dom0 (i.e. true dom0less
configuration).
By passing "without-dom0" as a test variant, the test will clear the
dom0 prompt that we grep for as a last step and remove all the DOM0
related options in ImageBuilder configuration.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Xen supports booting gzip compressed kernels, therefore add a new test
job qemu-smoke-dom0less-arm32-gcc-gzip in debug and non-debug variant
that will execute qemu-smoke-dom0less-arm32.sh script to test booting
a domU with a gzip compressed kernel image (in our case zImage).
By passing "gzip" as a test variant, the test will call gzip command
to compress kernel image and use it in ImageBuilder configuration for
domU1. No need for a specific check to be executed from domU. Being able
to see a test message from a boot log is sufficient to mark a test as
passed.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add a new test job qemu-smoke-dom0less-arm32-gcc-staticmem in debug
and non-debug variant that will execute qemu-smoke-dom0less-arm32.sh
script to test static memory allocation feature. The test case itself
is directly taken from dom0less arm64 testing.
Populate build jobs to compile Xen with config options necessary to
enable static memory feature. Populate test jobs passing "static-mem"
as a test variant. The test configures domU with a static memory region
(direct-mapped) and adds a check using /proc/iomem to determine the
memory region marked as "System RAM".
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, we only perform a single arm32 test in our CI, checking
whether dom0 boots successfully or not. This is mostly because we do not
have any arm32 runners and we only execute a hypervisor only build.
In order not to leave the arm32 testing in such a poor state, add a
script qemu-smoke-dom0less-arm32.sh to start testing dom0less
configuration, while keeping dom0 to make the test more interesting.
The script is mostly based on the one used for dom0 arm32 testing as well
as the one used for dom0less arm64 testing. We obtain Debian Bullseye
kernel and Alpine Linux busybox-based rootfs. Depending on the test
variant, we prepare a test case contained within domU_check variable,
that will be executed as part of /init script from domU rootfs.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add check if there is a message 'Hello from C env' presents
in log file to be sure that stack is set and C part of early printk
is working.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Add test jobs in both debug and non-debug versions to run hyp-xen-version
XTF test as a dom0less domU on arm64. The purpose of this test is to
validate the functional behavior of xen_version hypercall.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Populate test jobs for Yocto based tests using the provided containers.
Due to the size restrictions, it is currently not possible to split the
build and run tasks, therefore everything is done in a single step.
Test jobs for the supported Yocto targets are generic to avoid the
necessity to add new ones after each Yocto release. The only thing
required to be changed after updating the containers is the variable
YOCTO_VERSION stored in a .yocto-test template.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, we define lots of test jobs in test.yaml, that make use
of the same configuration sections like variables, tags, artifacts.
Introduce templates (hidden jobs whose names start with a dot) to
reduce the overhead and simplify the file (more than 100 lines saved).
This way, the actual jobs can only specify sections that are unique
to them.
Most of the test jobs specify the same set of prerequisite jobs under
needs property with just one additional being unique to the job itself.
Introduce YAML anchors for that purpose, because when using extends, the
needs property is not being merged (the parent property overwrites the
child one).
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
After qemu arm64 test scripts had been renamed to reflect their
usage, do the same for the qemu arm32 test script. Currently it only
boots dom0, so we can assume that this script will be used to perform
dom0 based testing. In the future we will be able to create corresponding
script qemu-smoke-dom0less-arm32.sh to perform dom0less based testing.
This is the last step to get rid of ambiguity with regards to naming
of Arm test scripts.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
qemu-alpine-arm64.sh script is used to perform dom0 based testing.
Rename this script to qemu-smoke-dom0-arm64.sh to reflect its usage.
Also rename the corresponding test jobs.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Testing arm64 is done using the qemu-alpine-arm64.sh and
qemu-smoke-arm64.sh scripts. These scripts are executed with exactly
the same artifacts (container, rootfs, kernel, qemu) and the only
difference is that the former is used to perform dom0 based testing
and the latter - dom0less based testing.
Because the current naming is quite ambiguous, rename qemu-smoke-arm64.sh
script to qemu-smoke-dom0less-arm64.sh to reflect its usage.
qemu-alpine-arm64.sh will be renamed in the follow-up patch.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, all the tests are executed on non-debug Xen builds.
To improve the coverage (e.g. we might catch some asserts), add new
test jobs using debug Xen builds.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Currently, all the arm64 defconfig build jobs, regardless of the
container used, end up building Xen with the extra config options
specified in the main build script (e.g. CONFIG_EXPERT,
CONFIG_STATIC_MEMORY). Because these options are only needed for
specific test jobs, the current behavior of the CI is incorrect
as we add the extra options to all the defconfig builds. This means
that on arm64 there is not a single job performing proper defconfig build.
To fix this issue, add custom build jobs each time there is a need for
building Xen with additional config options. Introduce EXTRA_XEN_CONFIG
variable to be used by these jobs to store the required options. This
variable will be then read by the main build script to modify the .config
file. This will also help users to understand what is needed to run specific
test.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add a new test job qemu-smoke-arm64-gcc-boot-cpupools that will execute
script qemu-smoke-arm64.sh to test boot time cpupools feature.
Enable CONFIG_BOOT_TIME_CPUPOOLS for the arm64 build and add a new test
case in qemu-smoke-arm64.sh that if selected will make use of the
ImageBuilder feature to create cpupool with cpu@1, null scheduler and
assign it to domU. Add a check in dom0 xen.start to see if domU is
assigned a Pool-1 with null scheduler.
Take the opportunity to refactor the qemu-smoke-arm64.sh script as
follows:
- use domU_check to store the test's commands to be run from domU
- use dom0_check to store the test's commands to be run from dom0
- use fdtput instead of sed to perform dtb modifications
- use more meaningful messages for "passed" variable. This way we can
grep for messages reported either by domU or dom0 and get rid of
assumption that tests can only be run from domU
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
After qemu-smoke-arm64 was changed to use kernel 5.19 we end up having
two kernel configurations. This is something not needed and maintaining
a single kernel version is always easier. Modify qemu-alpine-arm64-gcc
to use kernel 5.19 and remove kernel 5.9 from tests-artifacts.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Ayan Kumar Halder <ayankuma@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
This patch modified the test in the following way
- Dom0 is booted with an alpine linux rootfs with the xen tools.
- Once Dom0 is booted, it starts xenstored, calls init-dom0less to setup
the xenstore interface for the dom0less Dom1, setups the bridged network
and attaches a pv network interface to Dom1.
- In the meantime, Dom1 in its init script tries to assign an ip to eth0
and ping Dom0,
- If Dom1 manages to ping Dom0, it prints 'passed'.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Use kernel 5.19 to unblock testing dom0less enhanced.
This kernel version has the necessary patches for deferring xenbus probe
until xenstore is fully initialized.
Also, build kernel with bridging and xen netback support enabled because
it will be used for testing network connectivity between Dom0 and Dom1
over a pv network interface.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Enable CONFIG_STATIC_MEMORY in the existing arm64 build.
Create a new test job, called qemu-smoke-arm64-gcc-staticmem.
Adjust qemu-smoke-arm64.sh script to accomodate the static memory test as a
new test variant. The test variant is determined based on the first argument
passed to the script. For testing static memory, the argument is 'static-mem'.
The test configures DOM1 with a static memory region and adds a check in the
init script.
The check consists in comparing the contents of the /proc/device-tree
memory entry with the static memory range with which DOM1 was configured.
If the memory layout is correct, a message gets printed by DOM1.
At the end of the qemu run, the script searches for the specific message
in the logs and fails if not found.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Penny Zheng <penny.zheng@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Like with "dependencies", the jobs will get artifacts from the jobs
listed in "needs". But the test jobs can run as soon as the build jobs
listed have finished.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add a minimal ARM32 smoke test based on qemu-system-arm, as provided by
the test-artifacts qemu container. The minimal test simply boots Xen
(built from previous build stages) and Dom0.
The test needs a working kernel and minimal initrd for dom0. Instead of
building our own kernel and initrd, which would mean maintaining one or
two more builting scripts under automation/, we borrow a kernel and
initrd from distros.
For the kernel we pick the Debian Bullseye kernel, which has everything
we need already built-in. However, we cannot use the Debian Bullseye
initrd because it is 22MB and the large size causes QEMU to core dump.
Instead, use the tiny busybox-based rootfs provided by Alpine Linux,
which is really minimal: just 2.5MB. Note that we cannot use the Alpine
Linux kernel because that doesn't boot on Xen.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Michal Orzel <michal.orzel@arm.com>
Add qemu-system-arm to the existing test-artifacts qemu container (which
doesn't get build for every iteration but only updated once in a while.)
With qemu-system-arm available, we'll be able to run ARM32 tests.
This patch also bumps the QEMU version to v6.0.0 for both arm32 and
arm64 (the test-artifacts container is one, shared for both).
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Marek Marczykowski-Górecki
Andrew Cooper
Michal Orzel
Anthony PERARD
Roger Pau Monne
Shawn Anastasio
Simone Ballarin
Stefano Stabellini
Jiamei Xie
Oleksii Kurochko
Xenia Ragiadakou
Stefano Stabellini