This tests if QEMU works in PVH dom0. QEMU in dom0 requires enabling TUN
in the kernel, so do that too.
Add it to both x86 runners, similar to the PVH domU test.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Release-Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Commit 948e033031 ("automation/alpine: add elfutils-dev") had an unintended
consequence of causing Qemu to gain a runtime dependency on libdw.so
The {adl,zen3p}-pci-hvm-x86-64-gcc-debug tests, which are the only two tests
that run the built Qemu, started failing with:
Error loading shared library libdw.so.1: No such file or directory (needed by /usr/local/lib/xen/bin/qemu-system-i386)
Error relocating /usr/local/lib/xen/bin/qemu-system-i386: dwfl_begin: symbol not found
Update the test container with libelf to cope.
While editing the runtime dependency list, fix up two other problems. texinfo
isn't a runtime dependency, and we should be using xz itself, not it's
development libraries. Both changes shrink the initrd used for tests.
Fixes: 948e033031 ("automation/alpine: add elfutils-dev")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Instead of using specific architecture image, switch to using multi-arch ones
and specify the desired architecture using the --platform option.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Pass the desired architecture of the image in the FROM instruction if the
image is possibly multi-platform.
This allows using the x86 Dockerfiles on OS X on arm64 hardware.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Checking /proc/interrupts is unreliable because different drivers set
different names there. Install pciutils and use lspci instead.
In fact, the /proc/interrupts content was confusing enough that
adl-pci-hvm had it wrong (MSI-X is in use there). Fix this too.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Remove parts of initramfs for the test system (domU, and in few tests
dom0 too) that are not not working and are not really needed in this
simple system.
This makes the test log much lighter on misleading error messages.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Run ppc64le tests with the PowerNV machine type (bare metal) instead of
the paravirtualized pseries machine. This requires a more modern version
of QEMU than is present in debian bullseye's repository, so update the
dockerfile to build QEMU from source.
Support for booting on pseries was broken by 74b725a64d ('xen/ppc:
Implement initial Radix MMU support') which resulted in CI failures. In
preparation for removing pseries support entirely, switch the CI
infrastructure to the PowerNV machine type.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
It will be used in tests added in subsequent patches.
Enable config options needed for those tests.
While at it, migrate all the x86 tests to the newer kernel, and
introduce x86-64-test-needs to allow deduplication later (for now it's
used only once).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
After qemu-smoke-arm64 was changed to use kernel 5.19 we end up having
two kernel configurations. This is something not needed and maintaining
a single kernel version is always easier. Modify qemu-alpine-arm64-gcc
to use kernel 5.19 and remove kernel 5.9 from tests-artifacts.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Ayan Kumar Halder <ayankuma@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Use kernel 5.19 to unblock testing dom0less enhanced.
This kernel version has the necessary patches for deferring xenbus probe
until xenstore is fully initialized.
Also, build kernel with bridging and xen netback support enabled because
it will be used for testing network connectivity between Dom0 and Dom1
over a pv network interface.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add qemu-system-arm to the existing test-artifacts qemu container (which
doesn't get build for every iteration but only updated once in a while.)
With qemu-system-arm available, we'll be able to run ARM32 tests.
This patch also bumps the QEMU version to v6.0.0 for both arm32 and
arm64 (the test-artifacts container is one, shared for both).
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Build a 5.10 kernel to be used as Dom0 and DomU kernel for testing. This
is almost the same as the existing ARM64 recipe for Linux 5.9, the
only differences are:
- upgrade to latest 5.10.x stable
- force Xen modules to built-in (on ARM it was already done by defconfig)
Also add the exporting job to build.yaml so that the binary can be used
during gitlab-ci runs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
It is the same as the existing ARM64 alpine 3.12 test-artifact. It is
used to export an Alpine rootfs for Dom0 used for testing.
Also add the exporting job to build.yaml so that the binaries can be
used during gitlab-ci runs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
It has not been a dependency since at least 4.13. Remove its mandatory check
from ./configure.
Annotate the dependency in the CI dockerfiles, and drop them from CirrusCI and
TravisCI.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Currently we are using Debian's qemu-system-aarch64 for our tests.
However, sometimes it crashes. It is hard to debug and even harder to
apply any fixes to it.
Instead, build our own QEMU as one of our test-artifacts, which are only
built once, then imported into each pipeline via phony jobs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
Some tests (soon to come) will require pre-built binaries to run, such
as the Linux kernel binary. We don't want to rebuild the Linux kernel
for each gitlab-ci run: these builds should not be added to the current
list of build jobs.
Instead, create additional containers that today are built and uploaded
manually, but could be re-built automatically. The containers build the
required binarires during the "docker build" step and store them inside
the container itself.
gitlab-ci will be able to fetch these pre-built binaries during the
regular test runs, saving cycles.
Add two tests artifacts containers:
- one to build the Linux kernel ARM64
- one to create an Alpine Linux ARM64 rootfs for Dom0
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
Marek Marczykowski-Górecki