Add support for xl devd to support 9pfs in a domU. devd need to spawn a
pvqemu for the domain to service 9pfs as well as qdisk backends. Rename
num_qdisks to pvqemu_refcnt to be more generic.
Keep the qdisk-backend-pid xenstore key as well as the disk-%u log file.
They are externally visible, so they might be used by other tooling.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
libxl__spawn_qdisk_backend() explicitly sets guest_config to NULL when
starting QEMU (the usual launch through libxl__spawn_local_dm() has a
guest_config though).
Bail early on a NULL guest_config/d_config. This skips the QMP queries
for chardevs and VNC, but this xenpv QEMU instance isn't expected to
provide those - only qdisk (or 9pfs backends after an upcoming change).
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Make the backend type of 9pfs PV devices configurable. The default is
"qemu" with the related Xenstore backend-side directory being "9pfs".
Add another type "xen_9pfsd" with the related Xenstore backend-side
directory "xen_9pfs".
As additional security features it is possible to specify:
- "max-space" for limiting the maximum space consumed on the filesystem
in MBs
- "max-files" for limiting the maximum number of files in the
filesystem
- "max-open-files" for limiting the maximum number of concurrent open
files
For convenience "auto-delete" is available to let the backend delete the
oldest file of the guest in case otherwise "max-space" or "max-files"
would be violated.
The xen-9pfsd daemon will be started by libxenlight automatically when
the first "xen_9pfs" device is being created.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: George Dunlap <george.dunlap@cloud.com> # Golang bits
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
According to comments (and experiments) qemu-xen cannot handle memory
reolcation done by hvmloader. The code was already disabled when running
qemu-xen in dom0 (see libxl__spawn_local_dm()), but it was missed when
adding qemu-xen support to stubdomain. Adjust libxl__spawn_stub_dm() to
be consistent in this regard.
Reported-by: Neowutran <xen@neowutran.ovh>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Much like the device model depriv mode, add the same kind of support for the
bootloader. Such feature allows passing a UID as a parameter for the
bootloader to run as, together with the bootloader itself taking the necessary
actions to isolate.
Note that the user to run the bootloader as must have the right permissions to
access the guest disk image (in read mode only), and that the bootloader will
be run in non-interactive mode when restricted.
If enabled bootloader restrict mode will attempt to re-use the user(s) from the
QEMU depriv implementation if no user is provided on the configuration file or
the environment. See docs/features/qemu-deprivilege.pandoc for more
information about how to setup those users.
Bootloader restrict mode is not enabled by default as it requires certain
setup to be done first (setup of the user(s) to use in restrict mode).
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
-soundhw is deprecated since 825ff02911c9 ("audio: add soundhw
deprecation notice"), QEMU v5.1, and is been remove for upcoming v7.1
by 039a68373c45 ("introduce -audio as a replacement for -soundhw").
Instead we can just add the sound card with "-device", for most option
that "-soundhw" could handle. "-device" is an option that existed
before QEMU 1.0, and could already be used to add audio hardware.
The list of possible option for libxl's "soundhw" is taken the list
from QEMU 7.0.
The list of options for "soundhw" are listed in order of preference in
the manual. The first three (hda, ac97, es1370) are PCI devices and
easy to test on Linux, and the last four are ISA devices which doesn't
seems to work out of the box on linux.
The sound card 'pcspk' isn't listed even if it used to be accepted by
'-soundhw' because QEMU crash when trying to add it to a Xen domain.
Also, it wouldn't work with "-device" might need to be "-machine
pcspk-audiodev=default" instead.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
"-sdl" is deprecated upstream since 6695e4c0fd9e ("softmmu/vl:
Deprecate the -sdl and -curses option"), QEMU v6.2, and the option is
removed by 707d93d4abc6 ("ui: Remove deprecated options "-sdl" and
"-curses""), in upcoming QEMU v7.1.
Instead, use "-display sdl", available since 1472a95bab1e ("Introduce
-display argument"), before QEMU v1.0.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
I've observed this failed assertion:
libxl_event.c:2057: libxl__ao_inprogress_gc: Assertion `ao' failed.
AFAICT, this is happening in qmp_proxy_spawn_outcome where
sdss->qmp_proxy_spawn.ao is NULL.
The out label of spawn_stub_launch_dm() calls qmp_proxy_spawn_outcome(),
but it is only in the success path that sdss->qmp_proxy_spawn.ao gets
set to the current ao.
qmp_proxy_spawn_outcome() should instead use sdss->dm.spawn.ao, which is
the already in-use ao when spawn_stub_launch_dm() is called. The same
is true for spawn_qmp_proxy().
With this, move sdss->qmp_proxy_spawn.ao initialization to
spawn_qmp_proxy() since its use is for libxl__spawn_spawn() and it can
be initialized along with the rest of sdss->qmp_proxy_spawn.
Fixes: 83c845033d ("libxl: use vchan for QMP access with Linux stubdomain")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Introduce a new domain create field so that toolstack can specify the
maximum grant table version usable by the domain. This is plumbed into
xl and settable by the user as max_grant_version.
Previously this was only settable on a per host basis using the
gnttab command line option.
Note the version is specified using 4 bits, which leaves room to
specify up to grant table version 15. Given that we only have 2 grant
table versions right now, and a new version is unlikely in the near
future using 4 bits seems more than enough.
xenstored stubdomains are limited to grant table v1 because the
current MiniOS code used to build them only has support for grants v1.
There are existing limits set for xenstored stubdomains at creation
time that already match the defaults in MiniOS.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
This adds an option to the xl domain configuration file syntax for specifying
a kernel command line for device-model stubdomains. It is intended for use with
Linux-based stubdomains.
Signed-off-by: Scott Davis <scott.davis@starlab.io>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Usage of 'scsi-disk' device is deprecated and removed from QEMU,
instead we need to use 'scsi-hd' for hard drives.
See QEMU 879be3af49 (hw/scsi: remove 'scsi-disk' device)
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
This allows to set an `id` on the device instead of only the drive. We
are going to need the `id` with the "eject" and
"blockdev-change-media" QMP command as using `device` parameter on
those is deprecated. (`device` is the `id` of the `-drive` on the
command line).
We set the same `id` on both -device and -drive as QEMU doesn't
complain and we can then either do "eject id=$id" or "eject
device=$id".
Using "-drive + -device" instead of only "-drive" has been
available since at least QEMU 0.15, and seems to be the preferred way as it
separates the host part (-drive which describe the disk image location
and format) from the guest part (-device which describe the emulated
device). More information in qemu.git/docs/qdev-device-use.txt .
Changing the command line during migration for the cdrom seems fine.
Also the documentation about migration in QEMU explains that the device
state ID is "been formed from a bus name and device address", so
second IDE bus and first device address on bus is still thus and
doesn't matter if written "-drive if=ide,index=2" or "-drive
ide-cd,bus=ide.1,unit=0".
See qemu.git/docs/devel/migration.rst .
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Short-form boolean options are deprecated in QEMU 6.0.
Upstream commit that deprecate those: ccd3b3b8112b ("qemu-option: warn
for short-form boolean options").
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Implementing qrexec+usbip+qemu in Linux-based stub domain leads me to
an issue where a device model stub domain doesn't have maptrack entries.
Signed-off-by: Dmitry Fedorov <d.fedorov@tabit.pro>
Acked-by: Wei Liu <wl@xen.org>
Various version of gcc, when compiling with -Og, complain:
libxl_dm.c: In function 'libxl__domain_get_device_model_uid':
libxl_dm.c:256:12: error: 'kill_by_uid' may be used uninitialized in this function [-Werror=maybe-uninitialized]
256 | if (kill_by_uid)
| ^
The logic is very tangled. Set kill_by_uid on every path.
No funcational change.
Requested-by: Ian Jackson <iwj@xenproject.org>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Not-acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Various version of gcc, when compiling with -Og, complain:
libxl_dm.c: In function ‘libxl__write_stub_dmargs’:
libxl_dm.c:2166:16: error: ‘dmargs’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
rc = libxl__xs_write_checked(gc, t, path, dmargs);
~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It isn't actually used while uninitialised, but only because of how the
is_linux_stubdom checks line up.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Pass bridge name to qemu as command line option
When starting qemu, set an environnement variable XEN_DOMAIN_ID,
to be used by qemu helper scripts
The only functional difference of using the br parameter is that the
bridge name gets passed to the QEMU script.
NetBSD doesn't have the ioctl to rename network interfaces implemented, and
thus cannot rename the interface from tapX to vifX.Y-emu. Only qemu knowns
the tap interface name, so we need to use the qemu script from qemu itself.
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
NetBSD doesn't have setresuid(). introcuce libxl__setresuid(),
which on NetBSD assert() that it's never called (it should not be called when
dm restriction is off, and NetBSD doesn't support dm restriction at
this time).
On linux and FreeBSD it just calls setresuid().
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch reverts eight patches from staging.
The offending patch is the one that introduced libxl_pci_bdf (last one
in the list). The rest depend on that patch so they are also reverted.
8bf0fab142 "libxl / libxlu: support 'xl pci-attach/detach' by name"
e1141654c3 "docs/man: modify xl-pci-configuration(5) to add 'name' field to PCI_SPEC_STRING"
93c16ae47b "xl: support naming of assignable devices"
5ab684cb3e "libxl: introduce libxl_pci_bdf_assignable_add/remove/list/list_free(), ..."
66c2fbc6e8 "libxl: convert internal functions in libxl_pci.c..."
f73c5dd56d "docs/man: modify xl(1) in preparation for naming of assignable devices"
96ed6ff297 "libxlu: introduce xlu_pci_parse_spec_string()"
929f231140 "libxl: introduce 'libxl_pci_bdf' in the idl..."
Signed-off-by: Wei Liu <wl@xen.org>
... and use in 'libxl_device_pci'
This patch is preparatory work for restricting the type passed to functions
that only require BDF information, rather than passing a 'libxl_device_pci'
structure which is only partially filled. In this patch only the minimal
mechanical changes necessary to deal with the structural changes are made.
Subsequent patches will adjust the code to make better use of the new type.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Nick Rosbrook <rosbrookn@ainfosec.com>
The device model state saved by QMP xen-save-devices-state doesn't
include the vmdesc json. When restoring an HVM, xen-load-devices-state
always triggers "Expected vmdescription section, but got 0". This is
not a problem when restore comes from a file. However, when QEMU runs
in a linux stubdom and comes over a console, EOF is not received. This
causes a delay restoring - though it does restore.
Setting suppress-vmdesc skips looking for the vmdesc during restore and
avoids the wait.
QEMU 5.2 enables suppress-vmdesc by default for xenfv, but this change
sets it manually for xenfv and xen_platform_pci=0 when -machine pc is
use.
QEMU commit 9850c6047b8b "migration: Allow to suppress vmdesc
submission" added suppress-vmdesc in QEMU 2.3.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
QEMU without VNC support (configure --disable-vnc) will return an error
when VNC is queried over QMP since it does not recognize the QMP
command. This will cause libxl to fail starting the domain even if VNC
is not enabled. Therefore only query QEMU for VNC support when using
VNC, so a VNC-less QEMU will function in this configuration.
'goto out' jumps to the call to device_model_postconfig_done(), the
final callback after the chain of vnc queries. This bypasses all the
QMP VNC queries.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Wei Liu <wl@xen.org>
Today xenctrl_dom.h is part of libxenctrl as it is included by
xc_private.c. This seems not to be needed, so merge xenctrl_dom.h into
xenguest.h where its contents really should be.
Replace all #includes of xenctrl_dom.h by xenguest.h ones or drop them
if xenguest.h is already included.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Carve out all libxenlight related sources and move them to
tools/libs/light in order to use the generic library build environment.
The closely related sources for libxl-save-helper and the libxl test
environment are being moved, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Jason Andryuk
Juergen Gross
Marek Marczykowski-Górecki
Roger Pau Monne
Anthony PERARD
Alan Robinson
Scott Davis
Dmitry Fedorov
Andrew Cooper
Manuel Bouyer
Wei Liu
Paul Durrant