The hypervisor expects the timeout from the hypercall to be in
nanoseconds, so document this correctly. Also correctly document
what happens when timeout is set to zero.
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
If the distance is too big we are in trouble - as our relocation
distance can surely be clipped, or still have a valid width - but
cause an overflow of distance.
On various architectures the maximum displacement for a unconditional
branch/jump varies. ARM32 is +/- 32MB, ARM64 is +/- 128MB while x86
for 32-bit relocations is +/- 2G.
Note: On x86 we could use the 64-bit jmpq instruction which
would provide much bigger displacement to do a jump, but we would
still have issues with the new function not being able to reach
any of the old functions (as all the relocations would assume 32-bit
displacement). And "furthermore would require an register or
memory location to load/store the address to." (From Jan).
On ARM the conditional branch supports even a smaller displacement
but fortunately we are not using that.
Reviewed-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
As compared to x86 the va of the hypervisor .text
is locked down - we cannot modify the running pagetables
to have the .ro flag unset. We borrow the same idea that
alternative patching has - which is to vmap the entire
.text region and use the alternative virtual address
for patching.
Since we are doing vmap we may fail, hence the
arch_livepatch_quiesce was changed (see "x86,arm:
Change arch_livepatch_quiesce() declaration") to return
an error value which will be bubbled in payload->rc and
provided to the user (along with messages in the ring buffer).
The livepatch virtual address space (where the new functions
are) needs to be close to the hypervisor virtual address
so that the trampoline can reach it. As such we re-use
the BOOT_RELOC_VIRT_START which is not used after bootup
(alternatively we can also use the space after the _end to
FIXMAP_ADDR(0), but that may be too small).
The ELF relocation engine at the start was coded from
the "ELF for the ARM 64-bit Architecture (AArch64)"
(http://infocenter.arm.com/help/topic/com.arm.doc.ihi0056b/IHI0056B_aaelf64.pdf)
but after a while of trying to write the correct bit shifting
and masking from scratch I ended up borrowing from Linux, the
'reloc_insn_imm' (Linux v4.7 arch/arm64/kernel/module.c function.
See 257cb251925f854da435cbf79b140984413871ac "arm64: Loadable modules")
And while at it - we also utilize code from Linux to construct
the right branch instruction (see "arm64/insn: introduce
aarch64_insn_gen_{nop|branch_imm}() helper functions").
In the livepatch payload loading code we tweak the #ifdef to
only exclude ARM_32. The exceptions are not part of ARM 32/64 hence
they are still behind the #ifdef.
We also expand the MAINTAINERS file to include the arm64 and arm32
platform specific livepatch file.
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Jan Beulich <jbeulich@suse.com> [non-arm parts]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add hook functions which run during patch apply and patch revert.
Hook functions are used by livepatch payloads to manipulate data
structures during patching, etc.
One use case is the XSA91. As Martin mentions it:
"If we have shadow variables, we also need an unload hook to garbage
collect all the variables introduced by a hotpatch to prevent memory
leaks. Potentially, we also want to pre-reserve memory for static or
existing dynamic objects in the load-hook instead of on the fly.
For testing and debugging, various applications are possible.
In general, the hooks provide flexibility when having to deal with
unforeseen cases, but their application should be rarely required (<
10%)."
Furthermore include a test-case for it.
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The NOP functionality will NOP any of the code at
the 'old_addr' or at 'name' if the 'new_addr' is zero.
The purpose of this is to NOP out calls, such as:
e8 <4-bytes-offset>
(5 byte insn), or on ARM a 4 byte insn for branching.
We need the EIP of where we need to the NOP, and that can
be provided via the `old_addr` or `name`.
If the `old_addr` is provided we will NOP 'new_size'
amount of bytes at that location.
The amount is up to 31 instructions if desired (which is
the size of the opaque member). If there is a need to NOP
more then: a) more 'struct livepatch_func' structures need
to be present, b) we have to implement a variable size
buffer (in the future), or c) first byte an unconditional
branch skipping the to be disabled code (of course provided
there are no branch targets in the middle).
While at it, also unify the code on x86 patching so
it is a bit simpler (instead of two seperate writes
just make it one memcpy).
And introduce a general livepatch_insn_len inline function
that would depend on platform specific instruction size
(for a unconditional branch). As such we also rename the
PATCH_INSN_SIZE to ARCH_PATCH_INSN_SIZE.
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
On general this is unhealthy - as the payload's .bss (definitly)
or .data (maybe) will be modified once the payload is running.
Doing an revert and then re-applying the payload with a non-pristine
.bss or .data can lead to unforseen consequences (.bss are assumed
to always contain zero value but now they may have a different value).
There is one exception - if the payload contains only one .data section
- the .livepatch.funcs, then it is OK to re-apply an revert.
We detect this rather simply (if there is one RW section and its name
is .livepatch.funcs) - but the payload may have many other RW sections
that are not used at all (such as .bss or .data sections with zero
length). To not account those we also ignore sections with sh_size
being zero.
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
.. in the design document. The official location is:
git://xenbits.xen.org/livepatch-build-tools.git
Wiki is also updated with this URL.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Specifically:
s/\.xsplice/\.livepatch/
s/XSPLICE/LIVEPATCH/
s/xsplice/livepatch/
s/livepatch_patch_func/livepatch_func/
s/xSplice/Xen Live Patch/
s/livepatching/livepatch/
s/arch_livepatch_enter/arch_livepatch_quiesce/
s/arch_livepatch_exit/arch_livepatch_revive/
And then modify some of the function arguments
to have two more characters.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Ross Lagerwall
Konrad Rzeszutek Wilk
Konrad Rzeszutek Wilk