The generated go files were tracked temporarily while the initial
implementation of gengotypes.py was in progress. They can now be removed
and ignored by git and hg.
While here, make sure generated files are removed by make clean.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Acked-by: Wei Liu <wl@xen.org>
By default, if the go compiler is found by the configure script, build
the golang tools. If the compiler is not found, and --enable-golang was
not explicitly set, do not build to the golang tools.
The corresponding make variable is CONFIG_GOLANG. Remove CONFIG_GOLANG
from tools/Rules.mk since the variable is now set by configure in
config/Tools.mk.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: George Dunlap <george.dunlap@citrix.com>
This implements the wrapper around libxl_domain_create_new(). With
the previous changes, it's now possible to create a domain using the
golang bindings (although not yet to unpause it or harvest it after it
shuts down).
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
libxl forks external processes and waits for them to complete; it
therefore needs to be notified when children exit.
In absence of instructions to the contrary, libxl sets up its own
SIGCHLD handlers.
Golang always unmasks and handles SIGCHLD itself. libxl thankfully
notices this and throws an assert() rather than clobbering SIGCHLD
handlers.
Tell libxl that we'll be responsible for getting SIGCHLD notifications
to it. Arrange for a channel in the context to receive notifications
on SIGCHLD, and set up a goroutine that will pass these on to libxl.
NB that every libxl context needs a notification; so multiple contexts
will each spin up their own goroutine when opening a context, and shut
it down on close.
libxl also wants to hold on to a const pointer to
xenlight_childproc_hooks rather than do a copy; so make a global
structure in C space. Make it `static const`, just for extra safety;
this requires making a function in the C space to pass it to libxl.
While here, add a few comments to make the context set-up a bit easier
to follow.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
The current fromC array code will do the "magic" casting and
martialling even when num_foo variable is 0. Go crashes when doing
the cast.
Only do array marshalling if the number of elements is non-zero;
otherwise, leave the target pointer empty (nil for Go slices, NULL for
C arrays).
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Add DeviceUsbdevAdd and DeviceUsbdevRemove as wrappers for
libxl_device_usbdev_add and libxl_device_usbdev_remove.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Add DevicePciAdd and DevicePciRemove as wrappers for
libxl_device_pci_add and libxl_device_pci remove.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Add DeviceNicAdd and DeviceNicRemove as wrappers for
libxl_device_nic_add and libxl_device_nic_remove.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
The CET spec has been published and guest kernels are starting to get support.
Introduce the CPUID and MSRs, and fully block the MSRs from guest use.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
The OCaml code has been fixed to handle properly -safe-string in Xen
4.11, however the stubs part were missed.
On OCaml newer than 4.06.1, String_Val() will return a const char *
when using -safe-string leading to build failure when this is used
in place where char * is expected.
The main use in Xen code base is when a new string is allocated. The
suggested approach by the OCaml community [1] is to use the helper
caml_alloc_initialized_string() but it was introduced by OCaml 4.06.1.
The next best approach is to cast String_val() to (char *) as the helper
would have done. So use it when we need to update the new string using
memcpy().
Take the opportunity to remove the unnecessary cast of the source as
mempcy() is expecting a void *.
[1] https://github.com/ocaml/ocaml/pull/1274
Reported-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Commit ec7d54dd1a "ocaml/libs/xb: Use bytes in place of strings for
mutable buffers" switch mutable buffers from string to bytes. However
the C code were still using String_Val() to access them.
While the underlying structure is the same between string and bytes, a
string is meant to be immutable. OCaml 4.06.1 and later will enforce it.
Therefore, it will not be possible to build the OCaml libs when using
-safe-string. This is because String_val() will return a const value.
To avoid plain cast in the code, the code is now switched to use
Bytes_val(). As the macro is not defined in older OCaml version, we need
to provide a stub.
Take the opportunity to switch to const the buffer in
ml_interface_write() as it should not be modified.
Reported-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
stub_header_of_string() should not modify the header. So mark the
variable 'hdr' as const.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
xc_vcpu_getcontext() may fail to retrieve the vcpu context. Rather than
ignoring the return value, check it and throw an error if needed.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
It was observed that PCI MMIO and/or IO BARs were programmed with
memory and I/O decodes (bits 0 and 1 of PCI COMMAND register) enabled,
during PCI setup phase. This resulted in incorrect memory mapping as
soon as the lower half of the 64 bit bar is programmed.
This displaced any RAM mappings under 4G. After the
upper half is programmed PCI memory mapping is restored to its
intended high mem location, but the RAM displaced is not restored.
The OS then continues to boot and function until it tries to access
the displaced RAM at which point it suffers a page fault and crashes.
This patch address the issue by deferring enablement of memory and
I/O decode in command register until all the resources, like interrupts
I/O and/or MMIO BARs for all the PCI device functions are programmed,
in the descending order of memory requested.
Signed-off-by: Harsha Shamsundara Havanur <havanur@amazon.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
At this moment a guest can call vmfunc to change the altp2m view. This
should be limited in order to avoid any unwanted view switch.
The new xc_altp2m_set_visibility() solves this by making views invisible
to vmfunc.
This is done by having a separate arch.altp2m_working_eptp that is
populated and made invalid in the same places as altp2m_eptp. This is
written to EPTP_LIST_ADDR.
The views are made in/visible by marking them with INVALID_MFN or
copying them back from altp2m_eptp.
To have consistency the visibility also applies to
p2m_switch_domain_altp2m_by_id().
The usage of this hypercall is aimed at dom0 having a logic with a number of views
created and at some time there is a need to be sure that only some of the views
can be switched, saving the rest and making them visible when the time
is right.
Note: If altp2m mode is set to mixed the guest is able to change the view
visibility and then call vmfunc.
Signed-off-by: Alexandru Isaila <aisaila@bitdefender.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Wei Liu <wl@xen.org>
The presence of this filelock does not allow building several VMs at the same
time. This filelock was added to prevent other xl instances from using memory
freed for the currently building VM in autoballoon mode.
Signed-off-by: Dmitry Isaykin <isaikin-dmitry@yandex.ru>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxc defines XGS_POLICY_ABORT for precopy policy to signal that migration
should be aborted (eg. if the estimated pause time is too huge for the
instance). Default simple precopy policy never returns that, but it could be
overriden with a custom one.
Signed-off-by: Andrew Panyakin <apanyaki@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
[wei: fix coding style issue]
Commit 562a1c0f7e ("tools/xenstore: dont unlink connection object
twice") introduced a potential use after free problem in
domain_cleanup(): after calling talloc_unlink() for domain->conn
domain->conn is set to NULL. The problem is that domain is registered
as talloc child of domain->conn, so it might be freed by the
talloc_unlink() call.
With Xenstore being single threaded there are normally no concurrent
memory allocations running and freeing a virtual memory area normally
doesn't result in that area no longer being accessible. A problem
could occur only in case either a signal received results in some
memory allocation done in the signal handler (SIGHUP is a primary
candidate leading to reopening the log file), or in case the talloc
framework would do some internal memory allocation during freeing of
the memory (which would lead to clobbering of the freed domain
structure).
Fixes: 562a1c0f7e ("tools/xenstore: dont unlink connection object twice")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
We're deliberately bringing XEN_COMPILE_ARCH and XEN_TARGET_ARCH out of
sync in this case, and hence HOSTCC won't get set from CC. Therefore
without this addition HOSTCC would not match a possible make command
line override of CC, but default to "gcc", likely causing the build to
fail for test_x86_emulator.c on systems with too old a gcc.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The run* targets can be used to test whatever the tool chain is capable
of building, as long as at least the main harness source file builds.
Don't probe the tools chain, in particular to avoid issuing the warning,
in this case. While looking into this I also noticed the wording of the
respective comment isn't quite right, which therefore gets altered at
the same time.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
There is a bug in commit 5e4b419966 ("xen: credit2: only reset
credit on reset condition"). In fact, the aim of that commit was to
make sure that we do not perform too many credit reset operations
(which are not super cheap, and in an hot-path). But the check used
to determine whether a reset is necessary was the wrong one.
In fact, knowing just that some vCPUs have been skipped, while
traversing the runqueue (in runq_candidate()), is not enough. We
need to check explicitly whether the first vCPU in the runqueue
has a negative amount of credit.
Since a trace record is changed, this patch updates xentrace format file
and xenalyze as well
This should be backported.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
There have been report of stalls of guest vCPUs, when Credit2 was used.
It seemed like these vCPUs were not getting scheduled for very long
time, even under light load conditions (e.g., during dom0 boot).
Investigations led to the discovery that --although rarely-- it can
happen that a vCPU manages to run for very long timeslices. In Credit2,
this means that, when runtime accounting happens, the vCPU will lose a
large quantity of credits. This in turn may lead to the vCPU having less
credits than the idle vCPUs (-2^30). At this point, the scheduler will
pick the idle vCPU, instead of the ready to run vCPU, for a few
"epochs", which often times is enough for the guest kernel to think the
vCPU is not responding and crashing.
An example of this situation is shown here. In fact, we can see d0v1
sitting in the runqueue while all the CPUs are idle, as it has
-1254238270 credits, which is smaller than -2^30 = −1073741824:
(XEN) Runqueue 0:
(XEN) ncpus = 28
(XEN) cpus = 0-27
(XEN) max_weight = 256
(XEN) pick_bias = 22
(XEN) instload = 1
(XEN) aveload = 293391 (~111%)
(XEN) idlers: 00,00000000,00000000,00000000,00000000,00000000,0fffffff
(XEN) tickled: 00,00000000,00000000,00000000,00000000,00000000,00000000
(XEN) fully idle cores: 00,00000000,00000000,00000000,00000000,00000000,0fffffff
[...]
(XEN) Runqueue 0:
(XEN) CPU[00] runq=0, sibling=00,..., core=00,...
(XEN) CPU[01] runq=0, sibling=00,..., core=00,...
[...]
(XEN) CPU[26] runq=0, sibling=00,..., core=00,...
(XEN) CPU[27] runq=0, sibling=00,..., core=00,...
(XEN) RUNQ:
(XEN) 0: [0.1] flags=0 cpu=5 credit=-1254238270 [w=256] load=262144 (~100%)
We certainly don't want, under any circumstance, this to happen.
Let's, therefore, define a minimum amount of credits a vCPU can have.
During accounting, we make sure that, for however long the vCPU has
run, it will never get to have less than such minimum amount of
credits. Then, we set the credits of the idle vCPU to an even
smaller value.
NOTE: investigations have been done about _how_ it is possible for a
vCPU to execute for so much time that its credits becomes so low. While
still not completely clear, there are evidence that:
- it only happens very rarely,
- it appears to be both machine and workload specific,
- it does not look to be a Credit2 (e.g., as it happens when
running with Credit1 as well) issue, or a scheduler issue.
This patch makes Credit2 more robust to events like this, whatever
the cause is, and should hence be backported (as far as possible).
Reported-by: Glen <glenbarney@gmail.com>
Reported-by: Tomas Mozes <hydrapolic@gmail.com>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
The parameter 'params' of xc_set_parameters() should never be modified.
So mark it as const.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
OCaml is using a string to describe the parameter 'keys' of
xc_send_debug_keys(). Since Ocaml 4.06.01, String_val() will return a
const char * when using -safe-string. This will result to a build
failure because xc_send_debug_keys() expects a char *.
The function should never modify the parameter 'keys' and therefore the
parameter should be const. Unfortunately, this is not directly possible
because DECLARE_HYPERCALL_BOUNCE() is expecting a non-const variable.
A new macro DECLARE_HYPERCALL_BOUNCE_IN() is introduced and will take
care of const parameter. The first user will be xc_send_debug_keys() but
this can be used in more place in the future.
Reported-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Change the url scheme to https. This is all in-tree references to
xenbits and the main website except for those in Config.mk.
We leave Config.mk alone for now because those urls are used by CI
systems and we need to check that nothing breaks when we change the
download method.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Change the url scheme to https. This is all in-tree references to the
Xen wiki.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Replace the perl locking check with stat(1). Stat is able to fstat
stdin (file descriptor 0) when passed '-' as an argument. This is now
used to check $_lockfd. stat(1) support for '-' was introduced to
coreutils in 2009.
After A releases its lock, script B will return from flock and execute
stat. Since the lockfile has been removed by A, stat prints an error to
stderr and exits non-zero. Redirect stderr to /dev/null to avoid
filling /var/log/xen/xen-hotplug.log with "No such file or directory"
messages.
Placing the stat call inside the "if" condition ensures we only check
the stat output when the command completed successfully.
This change removes the only runtime dependency of the xen toolstack on
perl.
Suggested-by: Ian Jackson <ian.jackson@citrix.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
pygrub in xen-4.13.0 with python 3.8.2 fails with the error
Traceback (most recent call last):
File "/usr/libexec/xen/bin/pygrub", line 21, in <module>
import xen.lowlevel.xc
SystemError: bad call flags
This patch fixes mismatches in tools/python/xen/lowlevel/xc/xc.c
between the flag bits defined in pyxc_methods and the parameters passed
to the corresponding PyObject definitions.
With this patch applied pygrub works as expected.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Reviewed-by: Wei Liu <wl@xen.org>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Intel CPUs ignore operand size overrides here, while AMD ones don't.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Intel CPUs ignore operand size overrides here, while AMD ones don't.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This causes gcc (yes, and clang) to emit phony targets for each dependency.
This means that when a header file is deleted, the C files which *used*
to include it will no longer stop building with bogus out-of-date
dependencies like this:
make[5]: *** No rule to make target
'/home/dwmw2/git/xen/xen/include/asm/hvm/svm/amd-iommu-proto.h',
needed by 'p2m.o'. Stop.
Based on -MP post-dating -MP by many years it is assumed that the
behavior of -MP isn't the defualt just out of extreme caution. We're
sufficiently convinced that there are no undue side effects of this.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
A return value of zero means no PV drivers. Restore a hunk which was removed.
Fixes commit b183e180bc
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wl@xen.org>
... and, if it is not created, make the top level 'device' node in
xenstore writable by the guest instead.
The purpose and semantics of the suspend event channel node are explained
in xenstore-paths.pandoc [1]. It was originally introduced in xend by
commit 17636f47a4 "Teach xc_save to use event-channel-based domain
suspend if available.". Note that, because, the top-level frontend
'device' node was created writable by the guest in xend, there was no
need to explicitly create the 'suspend-event-channel' node as a writable
node.
However, libxl creates the 'device' node as read-only by the guest and so
explicit creation of the 'suspend-event-channel' node is necessary to make
it usable. This unfortunately has the side-effect of making some old
Windows PV drivers [2] cease to function. This is because they scan the top
level 'device' node, find the 'suspend' node and expect it to contain the
usual sub-nodes describing a PV frontend. When this is found not to be the
case, enumeration ceases and (because the 'suspend' node is observed before
the 'vbd' node) no system disk is enumerated. Windows will then crash with
bugcheck code 0x7B (missing system disk).
This patch adds a boolean 'xend_suspend_evtchn_compat' field into
libxl_create_info and a similarly named option in xl.cfg to set it.
If the value is true then the xenstore node is not created. Instead the
old xend behaviour of making top level device node writable by the guest is
re-instated. If the value is false (the default) then the current libxl
behaviour persists.
xenstore-paths.pandoc is also modified to say that the suspend event
channel node may not exist and, if it does not exist, then the guest may
create it. A note is also added concerning the writability of the top
level device node.
[1] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/misc/xenstore-paths.pandoc;hb=HEAD#l177
[2] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/5/html/para-virtualized_windows_drivers_guide/sect-para-virtualized_windows_drivers_guide-installing_and_configuring_the_para_virtualized_drivers-installing_the_para_virtualized_drivers
NOTE: While adding the new LIBXL_HAVE_CREATEINFO_... definition into
libxl.h, this patch corrects the previous stanza which erroneously
implies libxl_domain_create_info is a function.
Signed-off-by: Paul Durrant <paul@xen.org>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
In case of errors, we immediately call domcreate_complete()
which cleans up the console_xswait object. Make sure it is initialized
before we start cleanup.
Signed-off-by: Paweł Marczewski <pawel@invisiblethingslab.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
VERIFY_DN_TYPE and VERIFY_OS_TYPE should use parentheses when
accessing the type parameter. Note that none of the current usages
require this, it's just done for correctness.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
clang complains with:
fsys_zfs.c:826:2: error: converting the enum constant to a boolean [-Werror,-Wint-in-bool-context]
VERIFY_DN_TYPE(dn, DMU_OT_PLAIN_FILE_CONTENTS);
^
/wrkdirs/usr/ports/sysutils/xen-tools/work/xen-4.13.0/tools/libfsimage/zfs/../../../tools/libfsimage/zfs/fsys_zfs.h:74:11: note: expanded from macro 'VERIFY_DN_TYPE'
if (type && (dnp)->dn_type != type) { \
^
1 error generated.
Fix this by not forcing an implicit conversion of the enum into a
boolean and instead comparing with the 0 enumerator.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
xen-init-dom0 is a standalone binary, so all the functions but the
main() should be static.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Cc: paul@xen.org
Acked-by: Wei Liu <wl@xen.org>
Replace two stray tabs with spaces to make the file whitespace
consistent.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Wei Liu <wl@xen.org>
Keyed types in libxl_types.idl can have elements of type 'None'. The
golang type generator (correctly) don't implement any union types for
these empty elements. However, the toC and fromC helper generators
incorrectly treat these elements as invalid.
Consider for example, libxl_channelinfo. The idl contains the
following keyed element:
("u", KeyedUnion(None, libxl_channel_connection, "connection",
[("unknown", None),
("pty", Struct(None, [("path", string),])),
("socket", None),
])),
But the toC marshaller currently looks like this:
switch x.Connection {
case ChannelConnectionPty:
tmp, ok := x.ConnectionUnion.(ChannelinfoConnectionUnionPty)
if !ok {
return errors.New("wrong type for union key connection")
}
var pty C.libxl_channelinfo_connection_union_pty
if tmp.Path != "" {
pty.path = C.CString(tmp.Path)
}
ptyBytes := C.GoBytes(unsafe.Pointer(&pty), C.sizeof_libxl_channelinfo_connection_union_pty)
copy(xc.u[:], ptyBytes)
default:
return fmt.Errorf("invalid union key '%v'", x.Connection)
}
Which means toC() will fail for ChannelConnectionUnknown or
ChannelConnectionSocket.
Modify the generator to handle keyed union elements of type 'None'.
For fromC, set the value to 'nil'; for toC, leave things as-is.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Generate constructors for generated Go types. Call libxl_<type>_init so
the Go type can be properly initialized.
If a type has a keyed union field, add a parameter to the function
signature to set the key variable, and call the init function for the
keyed union.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
If the path doesn't become available after LIBXL_INIT_TIMEOUT
seconds, fail the domain creation.
If we skip the bootloader, the TTY path will be set by xenconsoled.
However, there is no guarantee that this will happen by the time we
want to call the console_available callback, so we have to wait.
Signed-off-by: Paweł Marczewski <pawel@invisiblethingslab.com>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The {save,restore}_callback helpers can have their scope reduced vastly, and
helper_setcallbacks_{save,restore}() doesn't need to use a ternary operator to
write 0 (meaning NULL) into an already zeroed structure.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
For now, write the same content for both. Update the users of the
initialisers to use the new name, and extend xen-cpuid to dump both default
and max featuresets.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Drop XC_FEATUREMASK_DEEP_FEATURES. It isn't used by any callers, and unlike
the other static masks, won't be of interest to anyone without other pieces of
cpuid-autogen.h
In xc_get_static_cpu_featuremask(), use a 2d array instead of individually
named variables, and drop the switch statement completely.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Just as with c/s 96dc77b4b1 for XEN_SYSCTL_get_cpu_policy,
XEN_SYSCTL_get_cpu_featureset wants to become conditional.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
As the code comment says, this will allow use of a 2Mb super page
mapping at the end of "low" memory.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Uniformly passing "false" can't be right, but has been benign because of
the function not using this parameter.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Nick Rosbrook
George Dunlap
Andrew Cooper
Julien Grall
Harsha Shamsundara Havanur
Alexandru Isaila
Dmitry Isaykin
Andrew Panyakin
Juergen Gross
Jan Beulich
Dario Faggioli
Ian Jackson
Jason Andryuk
YOUNG, MICHAEL A
David Woodhouse
Olaf Hering
Paul Durrant
Paweł Marczewski
Roger Pau Monne