The patch adds a new lib xc function (xc_altp2m_get_vcpu_p2m_idx) that
uses a new hvmop (HVMOP_altp2m_get_p2m_idx) to get the active altp2m
index from a given vcpu.
Signed-off-by: Alexandru Isaila <aisaila@bitdefender.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
This functionality is obsolete. It was introduced by c/s 41296317a3 into
Xend, but was never exposed in libxl.
Nothing limits this to PV guests, but it makes no sense for HVM guests.
Looking through the XenServer templates, this was used to work around bugs in
the 32bit RHEL/CentOS 4.7 and 4.8 kernels (fixed in 4.9) and RHEL/CentOS/OEL
5.2 and 5.3 kernels (fixed in 5.4). RHEL 4 as a major version went out of
support in 2017, whereas the 5.2/5.3 kernels went out of support when 5.4 was
released in 2009.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This functionality is obsolete. It was introduced by c/s 39407bed9c into
Xend, but never exposed in libxl.
While not explicitly limited to PV guests, this is PV-only by virtue of its
position in the pagefault handler.
Looking though the XenServer templates, this was used to work around bugs in
the 32bit RHEL/CentOS 4.{5..7} kernels (fixed in 4.8). RHEL 4 as a major
version when out if support in 2017.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Make handling in do_pm_op() more homogeneous: Before interpreting
op->cpuid as such, handle all operations not acting on a particular
CPU. Also expose the setting via xenpm.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add Hygon Dhyana support to caculate the cpuid policies for creating PV
or HVM guest by using the code path of AMD.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[Rebase over 0cd074144c "x86/cpu: Renumber X86_VENDOR_* to form a bitmap"]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
This was probably useful as a sanity check when the "__xen_guest"
section were not legacy. But now ELF notes are prefered and
"should live in a PT_NOTE segment" (elfnote.h).
This check is unnecessary as elf_xen_parse() from xen/common/libelf
will do the right thing and look for ELFNOTEs in the different places
in order of preference. elf_xen_parse() will still be able to also
look for the legacy "__xen_guest" section without the check in libxc.
This patch would allow to write a simpler ELF header for an OVMF blob
(which isn't an ELF) and allow it to be loaded as a PVH kernel. The
header only needs to declare two program segments:
- one to tell an ELF loader where to put the blob,
- one for a Xen ELFNOTE.
The ELFNOTE is to comply to the pvh design which wants the
XEN_ELFNOTE_PHYS32_ENTRY to declare a blob as compaptible with the PVH
boot ABI.
Note that without the ELFNOTE, libxc will load an ELF but with
the plain ELF loader, which doesn't check for shstrtab.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Remove all tmem related code in libxc.
Leave some stubs in libxl in case anyone has linked to those functions
before the removal.
Remove all tmem related commands in xl, all tmem related code in other
utilities we ship.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently, a user can in principle combine the output of `xl info -n`, the
APCI tables, and some manual CPUID data to figure out which CPU numbers to
feed into `xen-hptool cpu-offline` to effectively disable SMT at runtime.
A more convenient option is to teach Xen how to perform this action.
Extend XEN_SYSCTL_cpu_hotplug with two new operations. Introduce a new
smt_up_down_helper() which wraps the cpu_{up,down}_helper() helpers with logic
which understands siblings based on their APIC_ID.
Add libxc stubs, and extend xen-hptool with smt-{enable,disable} options.
These are intended to be shorthands for a loop over cpu-{online,offline}.
To simplify the implemention, they will strictly enable/disable secondary
siblings (those with a non-zero thread id). This functionality is intended
for use in production scenarios where debugging options such as `maxcpus=` or
other manual plug/unplug configuration has not been used.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This doesn't address any of the assumptions that "anything which isn't AMD is
Intel". This logic is expected to be replaced wholesale with libx86 in the
longterm.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
f969bc9fc9 forbid get_address_size call on HVM guests, because that
didn't make sense. It broke core dump functionality on HVM because
libxc unconditionally asked for guest width.
Force guest_width to a sensible value.
Reported-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently, the VM_EVENT_INTERFACE_VERSION is determined at runtime, by
inspecting the corresponding field in a vm_event_request. This helper
opcode will query the hypervisor supported version before the vm_event
related structures and layout are set-up.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Allow altp2m users to disable #VE/VMFUNC alone. Currently it is
only possible to disable this functionality when we disable altp2m
completely; #VE/VMFUNC can only be enabled once per altp2m session.
In addition to making things complete, disabling #VE is also a
workaround for CFW116 ("When Virtualization Exceptions are Enabled,
EPT Violations May Generate Erroneous Virtualization Exceptions")
on Xeon E-2100 CPUs.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
get_cpuid_domain_info() has two conflicting return styles - either -error for
local failures, or -1/errno for hypercall failures. Switch to consistently
use -error.
While fixing the xc_get_cpu_featureset(), take the opportunity to remove the
redundancy and move it to be adjacent to the other featureset handling.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In almost all cases, Xen and libxc will agree on the featureset length,
because they are built from the same source.
However, there are circumstances (e.g. security hotfixes) where the featureset
gets longer and dom0 will, after installing updates, be running with an old
Xen but new libxc. Despite writing the code with this scenario in mind, there
were some bugs.
First, xen-cpuid's get_featureset() erroneously allocates a buffer based on
Xen's featureset length, but records libxc's length, which may be longer.
In this situation, the hypercall bounce buffer code reads/writes the recorded
length, which is beyond the end of the allocated object, and a later free()
encounters corrupt heap metadata. Fix this by recording the same length that
we allocate.
Secondly, get_cpuid_domain_info() has a related bug when the passed-in
featureset is a different length to libxc's.
A large amount of the libxc cpuid functionality depends on info->featureset
being as long as expected, and it is allocated appropriately. However, in the
case that a shorter external featureset is passed in, the logic to check for
trailing nonzero bits may read off the end of it. Rework the logic to use the
correct upper bound.
In addition, leave a comment next to the fields in struct cpuid_domain_info
explaining the relationship between the various lengths, and how to cope with
different lengths.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This finally (after literally years of work!) marks the point where the
toolstack can ask the hypervisor for the current CPUID configuration of a
specific domain.
Introduce a new flask access vector and update the default policies.
Also extend xen-cpuid's --policy mode to be able to take a domid and dump a
specific domains CPUID and MSR policy.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Provide a SYSCTL for the toolstack to obtain complete system CPUID and MSR
policy information.
For the flask side of things, this subop is closely related to
{phys,cputopo,numa}info, so shares the physinfo access vector.
Extend the xen-cpuid utility to be able to dump the system policies. An
example output is:
Xen reports there are maximum 113 leaves and 3 MSRs
Raw policy: 93 leaves, 3 MSRs
CPUID:
leaf subleaf -> eax ebx ecx edx
00000000:ffffffff -> 0000000d:756e6547:6c65746e:49656e69
00000001:ffffffff -> 000306c3:00100800:7ffafbff:bfebfbff
00000002:ffffffff -> 76036301:00f0b5ff:00000000:00c10000
00000004:00000000 -> 1c004121:01c0003f:0000003f:00000000
00000004:00000001 -> 1c004122:01c0003f:0000003f:00000000
00000004:00000002 -> 1c004143:01c0003f:000001ff:00000000
00000004:00000003 -> 1c03c163:03c0003f:00001fff:00000006
00000005:ffffffff -> 00000040:00000040:00000003:00042120
00000006:ffffffff -> 00000077:00000002:00000009:00000000
00000007:00000000 -> 00000000:000027ab:00000000:9c000000
0000000a:ffffffff -> 07300403:00000000:00000000:00000603
0000000b:00000000 -> 00000001:00000002:00000100:00000000
0000000b:00000001 -> 00000004:00000008:00000201:00000000
0000000d:00000000 -> 00000007:00000340:00000340:00000000
0000000d:00000001 -> 00000001:00000000:00000000:00000000
0000000d:00000002 -> 00000100:00000240:00000000:00000000
80000000:ffffffff -> 80000008:00000000:00000000:00000000
80000001:ffffffff -> 00000000:00000000:00000021:2c100800
80000002:ffffffff -> 65746e49:2952286c:6f655820:2952286e
80000003:ffffffff -> 55504320:2d334520:30343231:20337620
80000004:ffffffff -> 2e332040:48473034:0000007a:00000000
80000006:ffffffff -> 00000000:00000000:01006040:00000000
80000007:ffffffff -> 00000000:00000000:00000000:00000100
80000008:ffffffff -> 00003027:00000000:00000000:00000000
MSRs:
index -> value
000000ce -> 0000000080000000
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Wei Liu <wei.liu2@citrix.com>
As with CPUID, an architectural form is used for representing the MSR data.
It is expected not to change moving forwards, but does have a 32 bit field
(currently reserved) which can be used compatibly if needs be.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
... rather than implementing them separately for libxc and libxl. They will
shortly be wanted in libx86 as well.
Fix up the style/consistency in the declaration, but no functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In particular, initialising %dr6 with the value 0 is buggy, because on
hardware supporting Transactional Memory, it will cause the sticky RTM bit to
be asserted, even though a debug exception from a transaction hasn't actually
been observed.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently there is a subop for setting the memaccess of a page, but not
for consulting it. The new HVMOP_altp2m_get_mem_access adds this
functionality.
Both altp2m get/set mem access functions use the struct
xen_hvm_altp2m_mem_access which has now dropped the `set' part and has
been renamed from xen_hvm_altp2m_set_mem_access.
Signed-off-by: Adrian Pop <apop@bitdefender.com>
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Instead of just doing it for the BSP. This requires storing the
maximum number of possible vCPUs in xc_dom_image.
This has been a latent bug so far because PVH doesn't yet support
pci-passthrough, so the effective memory cache attribute is forced to
WB by the hypervisor. Note also that even without this in place vCPU#0
is preferred in certain scenarios in order to calculate the memory
cache attributes.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In a classic HVI + Xen setup, the introspection engine would monitor
legacy guest page-tables by marking them read-only inside the EPT; this
way any modification explicitly made by the guest or implicitly made by
the CPU page walker would trigger an EPT violation, which would be
forwarded by Xen to the SVA and thus the HVI agent. The HVI agent would
analyse the modification, and act upon it - for example, a virtual page
may be remapped (its guest physical address changed inside the
page-table), in which case the introspection logic would update the
protection accordingly (remove EPT hook on the old gpa, and place a new
EPT hook on the new gpa). In other cases, the modification may be of no
interest to the introspection engine - for example, the accessed/dirty
bits may be cleared by the operating system or the accessed/dirty bits
may be set by the CPU page walker.
In our tests we discovered that the vast majority of guest page-table
modifications fall in the second category (especially on Windows 10 RS4
x64 - more than 95% of ALL the page-table modifications are irrelevant to
us) - they are of no interest to the introspection logic, but they
trigger a very costly EPT violation nonetheless. Therefore, we decided
to make use of the new #VE & VMFUNC features in recent Intel CPUs to
accelerate the guest page-tables monitoring in the following way:
1. Each monitored page-table would be flagged as being convertible
inside the EPT, thus enabling the CPU to deliver a virtualization
exception to he guest instead of generating a traditional EPT
violation.
2. We inject a small filtering driver inside the protected guest VM,
which would intercept the virtualization exception in order to handle
guest page-table modifications.
3. We create a dedicated EPT view (altp2m) for the in-guest agent, which
would isolate the agent from the rest of the operating system; the
agent will switch in and out of the protected EPT view via the VMFUNC
instruction placed inside a trampoline page, thus making the agent
immune to malicious code inside the guest.
This way, all the page-table accesses would generate a
virtualization-exception inside the guest instead of a costly EPT
violation; the #VE agent would emulate and analyse the modification, and
decide whether it is relevant for the main introspection logic; if it is
relevant, it would do a VMCALL and notify the introspection engine
about the modification; otherwise, it would resume normal instruction
execution, thus avoiding a very costly VM exit.
Signed-off-by: Adrian Pop <apop@bitdefender.com>
Reviewed-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Introduce a new hvmop, HVMOP_altp2m_set_suppress_ve, which allows a
domain to change the value of the #VE suppress bit for a page.
Add a libxc wrapper for invoking this hvmop.
Signed-off-by: Adrian Pop <apop@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Now that XEN_DOMCTL_createdomain handles the grant table limits, remove
XEN_DOMCTL_set_gnttab_limits (including XSM hooks and libxc wrappers).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
set_max_evtchn is somewhat weird. It was introduced with the event_fifo work,
but has never been used. Still, it is a bounding on resources consumed by the
event channel infrastructure, and should be part of createdomain, rather than
editable after the fact.
Drop XEN_DOMCTL_set_max_evtchn completely (including XSM hooks and libxc
wrappers), and retain the functionality in XEN_DOMCTL_createdomain.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
In future patches, the structure will be extended with further information,
and this is far cleaner than adding extra parameters.
The python stubs are the only user which passes NULL for the existing config
option (which is actually the arch substructure). Therefore, the #ifdefary
moves to compensate.
For libxl, pass the full config object down into
libxl__arch_domain_{prepare,save}_config(), as there are in practice arch
specific settings in the common part of the structure (flags s3_integrity and
oos_off specifically).
No practical change in behaviour.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
A previous patch added support for priv-mapping guest resources directly
(rather than having to foreign-map, which requires P2M modification for
HVM guests).
This patch makes use of the new API to seed the guest grant table unless
the underlying infrastructure (i.e. privcmd) doesn't support it, in which
case the old scheme is used.
NOTE: The call to xc_dom_gnttab_hvm_seed() in hvm_build_set_params() was
actually unnecessary, as the grant table has already been seeded
by a prior call to xc_dom_gnttab_init() made by libxl__build_dom().
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
To facilitate the shared Xen and toolstack code in libx86, struct msr_policy
needs to be available in the same way as struct cpuid_policy.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Move x86_cpuid_lookup_deep_deps() into the shared library, removing the
individual copies from the hypervisor and libxc respectively.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Begin to untangle the header dependency tangle by moving definition of
struct cpuid_leaf out of x86_emulate.h into the new cpuid.h.
Additionally, plumb the header through to libxc. This is technically a
redundant include at this point, but it helps build-test the later changes,
and will be used eventually.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Lift the loading code out of PVH specific branch. Take the chance to
make the debug message more useful.
Now the code needs to handle virt_base being UNSET_ADDR, which it is
for HVM guest. In case virt_base is not set, it should be treated as
zero. In case PVH and PV, virt_base is set by the respective loader
by parsing the binary.
IPXE will be loaded as a module of Rombios.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
And enable MTRR. This allows to provide a sane initial MTRR state for
PVH DomUs. This will have to be expanded when pci-passthrough support
is added to PVH guests, so that MMIO regions of devices are set as
UC.
Note that initial MTRR setup is done by hvmloader for HVM guests,
that's not used by PVH guests.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In order to support auditing of qemu depriv, my audit tool wants to
know the fd of a privcmd handle on which it can easily make
hypercalls. xencall provides such a handle, but has no cooked
facilities for making hypercalls. So I open a libxc handle. That
means I need to get the privcmd fd out of the libxc handle.
ISTM that it is best to do this by providing an interface to get the
underlying library handles for a libxc handle. This kind of interface
is quite common elsewhere and has not caused problems.
libxc is not a stable API so the downside risk of providing this
access is not significant.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
These functions are no longer defined or used anywhere. The
declarations should have been deleted when the definitions were.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
This patch is adding a way to enable/disable inguest pagefault
events. It introduces the xc_monitor_inguest_pagefault function
and adds the inguest_pagefault_disabled in the monitor structure.
This is needed by the introspection so it will only get gla
faults and not get spammed with other faults.
In p2m_mem_access_check() we emulate so no event will get sent.
Signed-off-by: Alexandru Isaila <aisaila@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
xen-tools/libs.h currently contains a shared BUILD_BUG_ON() implementation and
is used by some tools. Extend this to include ARRAY_SIZE and clean up all the
opencoding.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The new data lives in the .topo union, rather than being treated as a single
leaf in the basic union.
While adjusting cpuid_policy, pad .basic to CPUID_GUEST_NR_BASIC for the
benefit of people extending the number of leaves in the future.
Host data is scanned when filling in the raw policy, but Xen still discards
any toolstack settings for now.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This helper appears to have been introduced 10 years ago by c/s 5f14a87ceb
"x86, hvm: Guest CPUID configuration" and never had any users at all.
alloc_str() is actually an opencoded calloc(), and now only has a single
caller. Use calloc() directly and drop alloc_str().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
None of the called functions return any errors, so there's no point in
returning an int from xc_cpuid_policy.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
A hypercall issued via the privcmd driver can very rarely return
-EFAULT even if the hypercall buffers are locked in memory. This
happens for hypercall buffers in user memory when the Linux kernel
is doing memory scans e.g. for page migration or compaction.
Retry the getpageframeinfo3 hypercall up to 2 times in case
-EFAULT is returned and the hypervisor might see invalid PTEs for
user hypercall buffers (which should be the case only if the kernel
doesn't offer a /dev/xen/hypercall node).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Alexandru Stefan ISAILA
Andrew Cooper
Chao Gao
Ross Lagerwall
Pu Wen
Anthony PERARD
Wei Liu
Petre Pircalabu
Razvan Cojocaru
Sergey Dyasli
Roger Pau Monné
Ian Jackson
Adrian Pop
Paul Durrant
Ian Jackson
Juergen Gross