Commit 26dbc93a ("libxl: Remove pointless hypercall from
libxl_set_memory_target") removed the call to xc_domain_getinfolist, but
it failed to notice that "info" was actually needed later.
Put that back. While at it, make the code conform to coding style
requirement.
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
That header file is not used. Removing it would avoid build error with
musl libc, which doesn't have that header file.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
[ wei: rewrote commit message ]
Acked-by: Wei Liu <wei.liu2@citrix.com>
To avoid build errors relating to missing declarations of ssize_t add
the appropriate header file to atomic.h.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The unsued variable 'struct stat stats' causes build errors in some
situations. As it isn't used just remove it.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit d6ac8e22c7 ("acpi/x86: define ACPI IO registers for
PVH guests") broke ARM64 build of mk_dsdt.c due to introduction
of XEN_ACPI_CPU_MAP[_LEN] macros that are needed only for x86
guests.
We could fix the build by dealing specifically with those macros
but since post-MADT code is not executed on ARM64 anyway we can
compile it for x86 only.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
At the moment the execution of xencommons is gated on the presence of the
privcmd device, but that's not correct, since privcmd is available to all Xen
domains (privileged or unprivileged). Instead of using privcmd use the
xenstored device, which will only be available to the domain that's in charge
of running xenstored, and thus xencommons.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
...because it's empty. While there also rename xendriverdomain_startcmd to
xendriverdomain_start in order to match the nomenclature of the file.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: fix up minor error ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
FreeBSD init scripts don't have /usr/local/{bin/sbin} in it's PATH, which
prevents `xl devd` from working properly since hotplug scripts require the set
of xenstore cli tools to be in PATH.
While there also fix the usage of --pidfile, which according to the xl help
doesn't use "=", and add braces around XLDEVD_PIDFILE.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
1. Use "r" to store return values from xc calls.
2. Don't initialise "rc" at the beginning of the function.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
AMD explicitly documents that namely FS and GS don't have their bases
cleared in that case, and I see no reason why guests may not rely on
that behavior. To facilitate this a new input field (the CPU vendor) is
being added.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Define VCPU available map address (used by AML's PRSC method)
and GPE0 CPU hotplug event number. Use these definitions in mk_dsdt
instead hardcoded values.
These definitions will later be used by both the hypervisor and
the toolstack (initially for PVH guests only), thus they are
placed in public headers.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
xc_doamin_getinfo returns >=0 in success path, and if there is no vnode
configured, that rc will be returned to caller, which indicates error.
Fix that by setting rc to 0 in success path.
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Re-use an existing stack variable (reducing stack footprint, which also
results in smaller code due to some stack accesses no longer needing a
32-bit displacement), at once using a union instead of casts. Also
switch to rex_prefix based conditionals instead of op_bytes ones.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This check for curses.h does not consider cross-compilation.
It only checks host paths.
Luckily, commit 65da491321
introduced proper configure checks for ncurses so we can
remove the redundant check in the Makefile.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Exit with 0 for success.
Exit with 1 for an error.
Exit with 2 if the operation should be retried for any reason (e.g. a
timeout or because another operation was in progress).
This allows a program or script driving xen-livepatch to determine if
the operation should be retried without parsing the output.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
The default timeout in the hypervisor for a livepatch operation is 30 ms,
but xen-livepatch currently waits for up to 30 seconds for the operation
to complete. Instead, remove the retry loop and simply wait for 2 * 30 ms
for the operation to complete. The extra period is to account for the
time to actually start the operation.
Furthermore, have xen-livepatch set the hypervisor timeout rather than
relying on the hypervisor default since the tool doesn't know how long
it will be. Use nanosleep rather than usleep since usleep has been
removed from POSIX.1-2008.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
The hypervisor expects the timeout from the hypercall to be in
nanoseconds, so document this correctly. Also correctly document
what happens when timeout is set to zero.
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Improving the output of xen-livepatch, which is currently hard to read,
especially when an error occurs.
Some examples of the changes:
Before:
$ xen-livepatch apply test
Performing apply:. completed
After:
$ xen-livepatch apply test
Applying test:. completed
Before:
$ xen-livepatch apply test2
test2 failed with 22(Invalid argument)
Performing apply: (no newline)
After:
$ xen-livepatch apply test2
Applying test2: failed
Error 22: Invalid argument
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Using both stdout and stderr interleaved without newlines can result in
strange output when using line buffered mode (e.g. a terminal) or when
fully buffered (e.g. redirected to a file). Set stdout to unbuffered mode
to fix this (stderr is always unbuffered by default).
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Somewhat confusingly, before the action has been executed the patch is
expected to be in the "allow" state, not the "expected" state. The
check for this was correct but the subsequent error message was not.
Fix the error message to show this state correctly.
Before:
$ xen-livepatch unload test
test: in wrong state (APPLIED), expected (unknown)
After:
$ xen-livepatch unload test
test: in wrong state (APPLIED), expected (CHECKED)
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
This removes 0F C7 from the list of two-byte opcodes treating prefixes
66, F3, and F2 as opcode extensions. We better manually handle this in
the opcode specific code:
- CMPXCHG8B ignores all these prefixes (its handling is being adjusted
accordingly, with a respective test case added as well, to avoid
re-introducing the subject of XSA-200),
- RDRAND/RDSEED (support to be added subsequently) honor 66, but treat
F3 and F2 as opcode extensions (resolving to RDPID in the RDSEED
case, which in turn ignores 66).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Qdisk supports qcow and qcow2, extend it to also support qed disk
format.
Signed-off-by: Cédric Bosdonnat <cbosdonnat@suse.com>
[ wei: regenerate libxlu_disk_l.{c,h} ]
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
At the moment this flag is unconditionally set for PVHv2 domains. Note that
using this boot flag requires that the FADT table revision is at least 5.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Update the structure of the FADT table to version 5, and use that version for
PVHv2 guests. Note that HVM guests will continue to use FADT 4. In order to do
this, add a new field to acpi_config that contains the ACPI revision to use by
libacpi. Note that currently this only applies to the FADT.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This will make all fuzzing targets get build every time tools directory
is built. This serves as basic regression test.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Instruction emulator fuzzing code is from code previous written by
Andrew and George. Adapt it to llvm fuzzer and hook up the build system.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
While at it, move xgetbv, all cpu_has_* and cache_line_size macros to
x86_emulate.h.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Source code and Makefile to fuzz libelf in Google's oss-fuzz
infrastructure.
Introduce FUZZ_NO_LIBXC in libelf-private.h. That macro will be set when
compiling libelf fuzzer target because libxc is not required in libelf
fuzzing.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
From the make documentation:
"$* [...] If the target is `dir/a.foo.b' and the target pattern is
`a.%.b' then the stem is `dir/foo'. In a static pattern rule, the
stem is part of the file name that matched the `%' in the target
pattern."
The rule generating the c types files from the idl ones is not
a static pattern rule, but rather an implicit rule. Thus the value
of $* is preceded by the file path, instead of only what matches %.
In order to get this fixed, drop the path using a $(notdir $*).
Signed-off-by: Cédric Bosdonnat <cbosdonnat@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 20b75251d9 introduced an erroneous
negation which gave the isstubdom bool the opposite semantics, causing
the subsequent code to take the wrong code path, which breaks HVM
pci-passthrough.
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Cedric Bosdonnat <cbosdonnat@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Unconditionally reporting a skipped test in 64-bit builds is not very
useful, especially when quite a few more tests are about to be added.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Wei Liu
Zhang Chen
Alistair Francis
Eric DeVolder
Boris Ostrovsky
Roger Pau Monne
Jan Beulich
Anshul Makkar
Edgar E. Iglesias
Ross Lagerwall
Cédric Bosdonnat
Sander Eikelenboom