In the case where a device is attached to an inactive domain
and then removed before the domain is activated it won't have
a vslot assigned, but it should still be valid to remove it.
I don't think that there are any other cases where vslot can
be invalid.
Signed-off-by: Simon Horman <horms@verge.net.au>
This patch adds the option "superpages" to the domain configuration
file. If it is set, the domain is populated using 2M pages.
This code does not support fallback to small pages. If the domain can
not be created with 2M pages, the create will fail.
The patch also includes support for saving and restoring domains with
the superpage flag set. However, if a domain has freed small pages
within its physical page array and then extended the array, the
restore will fill in those freed pages. It will then attempt to
allocate more than its memory limit and will fail. This is
significant because apparently Linux does this during boot, thus a
freshly booted Linux image can not be saved and restored successfully.
Signed-off-by: Dave McCracken <dcm@mccr.org>
Remove *all* hardcoded "/etc/xen" strings in python code.
Additionally, it removes pygrub_path from osdep.py. Its use has been
replaced with auxbin.pathTo("pygrub").
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
In some configurations, when dom0 is busy with I/O, it may take
several minutes to complete all hotplug scripts required when a new
domain is being created. As device create timeout is set to 100
seconds, users get "hotplug scripts not working" error instead of a
new domain.
This patch makes both DEVICE_CREATE_TIMEOUT and DEVICE_DESTROY_TIMEOUT
configurable in xend-config.sxp to allow users to easily adapt hotplug
timeouts to their environment.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This can greatly improve ssl relocation performance (to about 1/3
compared with buffersize 1024).
Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>
In the case of inactive managed domains:
The following error occurs currently. We cannot change the
configuration of the VBD by using xm block-configure. Of course,
using xm block-detach and xm block-attach instead of xm
block-configure, we can change it. However, I'd like to change it by
using xm block-configure.
In the case of active domains:
Another problem occurs after a domain was rebooted. Even if we
change a configuration of a VBD in the domain by using xm
block-configure, the configuration of the VBD is reverted to previous
configuration after the domain was rebooted.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
When a PCI function is passed-through extra options may be passed
through.
In the case of boot-time PCI pass-through the documented format is:
[dom:]bus:dev.slot[@vslot][[,opt]...]
e.g.
00:01.00.1@7,msitranslate=3D1
In the case of PCI hot-plug the xm pci-attach command take the
following arguments:
[-o opt[,opt]...] [dom:]bus:dev.slot [vslot]
e.g.
-o msitranslate=3D1 00:01.00.1 7
These xm ends up passing these to xem-qemu as:
[dom:]bus:dev.slot[[,opt]...][@vslot]
e.g.
00:01.00.1,msitranslate=3D1@7
Note that the option and the vslot have are transposed when
compared to the format used by boot-time PCI pass-through.
The parser inside qemu-xen can only handle the format used by
boot-time PCI pass-through and because of this ignores
any options passed by hot-plug.
This patch alters format used by hot-plug to match the parser.
Signed-off-by: Simon Horman <horms@verge.net.au>
We change all invocations of setup.py as follows:
* use $(PYTHON) instead of `python' so that the user can specify
an alternative python version if they need to. If not set it
defaults to `python' in Config.mk.
* pass --prefix=$(PREFIX) via a new make variable
$(PYTHON_PREFIX_ARG). This allows a user to suppress the
--prefix=... argument entirely by setting PYTHON_PREFIX_ARG=''.
This will work around the bug described here
https://bugs.launchpad.net/ubuntu/+bug/362570
where passing --prefix=/usr/local (which ought to have no effect as
/usr/local is the default prefix) changes which subdirectory
distutils chooses, and results in the files being installed in
site-packages which is not on the default search path.
Users not affected by this python packaging bug should not set
PYTHON_PREFIX_ARG and their builds will not be affected. (Provided
PREFIX did not contain spaces. People who put spaces in PREFIX are
being quite optimistic.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
op_pincpu method in SrvDomain.py does not currently work because
op_pincpu method gives string objects to a cpumap argument of
domain_pincpu method in XendDomain.py though the cpumap argument
expects list objects.
This patch solves the above problem as follows.
op_pincpu method gives string objects to the cpumap argument as is,
because op_pincpu method cannot give list objects to the cpumap
argument.
Instead, domain_pincpu method expects that the cpumap argument is
string objects, then domain_pincpu method converts the cpumap
argument into list objects.
Also, the patch modifies two methods (except for op_pincpu method)
calling domain_pincpu method. The methods give string objects to
the cpumap argument instead of list objects.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
When guest OS shutdowns or a device is hotremoved.
1. Xend resets devices.
2. Xend deassigns devices.
Because if devices are deassigned before the reset, dom0 memory may be
overwritten by DMA.
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
Prior to changset 19510:5c69f98c348e - 'xm, xend: Replace "vslt" with
"vslot"', both vslt and vslot were used in the xm code, often fairly
arbitrarily.
However, in the dictionary that describes a pci function both vslt and
vslot were present. vslt stored the slot assigned to the function. And
vslot stored the slot the user requested for the function, or
AUTO_PHP_SLOT if no slot was requested.
With the renaming these two values got merged into a single entry.
This patch un-merges them by renaming the what was vslot to
requested_vslot.
So an out of chronological order list of name changes is:
'vslot' -> 'requested_vslot'
'vslt' -> 'vslot'
Signed-off-by: Simon Horman <horms@verge.net.au>
Display and xauthority vars are read from vmConfig['platform'] first,
then they are read again from dev_info.
However if the user does not set those variable in the config file,
dev_info won't contain them, hence we are going to overwrite the
current significant values with null.
This patch fixes the problem setting display and xauthority to the
current values if dev_info does not contain them.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch removes the need for a second configuration file for
stubdoms: it is going to be automatically generated by the script
stubdom-dm using command line options and xenstore to find any needed
information.
The configuration script will be placed under /etc/xen/stubdoms and
automatically removed when the domain is destroyed.
The only change needed in xend is not to write on xenstore sdl,
opengl and serial command line options for qemu, because stubdoms do
not support them.
It is safe to remove those two options from xenstore because qemu does
not use xenstore to read commans line options.
Finally this patch fixes blkfront disconnections from backends and
display and xauthority variables for pv guests.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Some qemu-dm related stuffs might be left behind after the domain is
destroyed.
- xenstore entry, /local/domain/0/device-model/<domid>
- named pipes, /var/run/tap/qemu-{read,write}-<domid>
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
I observed from xend.log that several domain restart threads run
simultaneously. This patch make it singleton.
Without this, several coredump of a domain might be created.
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
If a qemu-dm dies immediately (probably by wrong setting),
xend repeats to restart a domain so many times.=20
That causes system overload.
There is already a logic to avoid too early restarting, however,
it might not work. Since xenstore entry 'xend/previous_restart_time'
is volatile. XendDomainInfo.destroy() which removes the entry from
xenstore is called in some places.
Also, this patch prevents too early restarting even at the first
domain creation.
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
Previously, by default we would install our python modules into
/usr/lib/python/xen, for example /usr/lib/python/xen/__init__.py.
Upstream python's standard install location (a) includes the Python
version number and (b) puts things in site-packages by default.
Our best conjecture for the reason for this was an attempt to make the
installs portable between different python versions. However, that
doesn't work because compiled python modules (.pyc), and C python
extensions corresponding to one version of python, are not compatible
across different versions of python.
This is why upstream include the version number.
site-packages is the standard location for locally-installed packages
and is automatically included on the python search path.
In this change, we abandon our own unusual python path setup:
* Invoke setup.py in an entirely standard manner. We pass
PREFIX and DESTDIR using the appropriate options provided by
setup.py for those purposes (adding them to setup.py calls
which were previously lacking them).
* Since the installation locations are now on the standard
python path, we no longer need to add anything to the path
in any of our python utilities. Therefore remove all that
code from every python script. (Many of these scripts
unconditionally added /usr/lib/python and /usr/lib64/python which
is wrong even in the old world.)
* There is no longer any special `Xen python path'. xen-python-path
is no longer needed. It is no longer called by anything in our
tree. However since out-of-tree callers may still invoke it, we
retain it. It now prints a fixed string referring to a directory
which does not to exist; callers (who use it to augment their
python path) will thus add a nonexistent directory to their python
path which is harmless.
* Remove various workarounds including use of setup.py --home
(which is intended for something completely different).
* Remove tests for the XEN_PYTHON_NATIVE_INSTALL build-time
environment variable. The new behaviour is the behaviour which we
should have had if this variable had been set. That is, it is now
as if this variable was always set but also bugs in the resulting
install have been fixed.
This should be a proper fix for the bug addressed by c/s 19515.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
When xend calls xc.test_assign_device, xend does not have to give
the domain-ID of a guest domain.
This patch gives domain-ID 0 to xc.test_assign_device.
The following methods give domain-ID 0 to xc.test_assign_device
currently.
- setupDevice@xend/server/pciif.py
- pciinfo@xend/XendNode.py
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
attached patch lets python install the modules into
DESTDIR/PREFIX as before, but lets python search
the modules in PREFIX rather DESTDIR/PREFIX.
This prevents failures about not finding python modules
after files have been installed into PREFIX.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
xenwatch thread _storeChanged() may create /local/domain/<domid>
entries in xenstore even after the domain has shutdown.
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
This patch adds the ACPI fixed hardware power button for HVM.
It enables a graceful shutdown of a guest OS by direction of Dom0.
(if a proper action for the power button is set inside the guest)
usage:
xm trigger <Domain> power
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
The rtc_timeoffset parameter in VM config is ignored when
localtime=1. Also it is not preserved across reboot.
NOTE:
This patch changes the meaning of the xenstore
/vm/<uuid>/rtc/timeoffset
from utc offset to local offset. (it's OK for the ioemu)
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
I've found some problems when running 2 guests with and then trying
to install a new machine (no matter whether using virt-manager or
virt-install).
Signed-off-by: Michal Novotny <minovotn@redhat.com>
We need to close the socket on the child side when xend creates a
child process such as qemu-dm.
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
This patch allows hvm domain to have multiple serial ports
with serial =3D [ '...', '...'].
The old style, serial=3D'option string', is also accepted for
compatibility.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Shutting down a hvm, xend-debug.log always shows:
Unhandled exception in thread started by=20
Traceback (most recent call last):
File "//usr/lib64/python/xen/xend/image.py", line 549, in
_sentinel_watch
self._dmfailed(message)
File "//usr/lib64/python/xen/xend/image.py", line 491, in _dmfailed
xc.domain_shutdown(self.vm.getDomid(), DOMAIN_CRASH)
xen.lowlevel.xc.Error: (3, 'No such process')
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
Keir Fraser