Making room for a 64 bit implementation.
Also fix a typo and stop refering to it as a bzImage, which is an x86-ism.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
The tools and the hypervisor need to agree on various aspects of the guest
environment, such as interrupt numbers, memory layout, initial register values
for registers which are implementation defined etc. Therefore move the
associated defines into the public interface headers, or create them as
necessary.
This just exposes the current de-facto standard guest layout, which may be
subject to change in the future. This deliberately does not make the guest
layout dynamic since there is currently no need.
These values should not be exposed to guests, they should find these things
out via device tree or should not be relying on implementation defined
defaults.
Various bits of the hypervisor needed to change to configure dom0 with the real
platform values while using the virtual platform configuration for guests.
Arrange for this where appropriate and plumb through as needed.
We also need to expose some 64-bit values (e.g. PSR_GUEST64_INIT) for the
benefit of 32 bit toolstacks building 64 bit guests.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
The new coding style uses the convenience macro CTX as declared in
libxl_internal.h. Substitute an invocation of this macro for its
body at the two places it occurs in libxl_utils.c.
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
To conform to the new coding style, replace the invocation of
LIBXL__LOG in the function libxl_pipe() in the file libxl_utils.c
with an invocation of LOG. Create a local libxl__gc gc* for LOG
to use by invoking GC_INIT(ctx) at the top of the function, and
clean it up by invoking GC_FREE at the exit. Create a variable,
ret, to consolidate exits in one place and avoid invoking GC_FREE
twice.
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Code cleanup - no functional changes
The convenience macros LOG and LOGE have been written to take the
place of the old macros in the LIBXL__LOG* family. Replace the
invocations of the old macros in the function libxl_read_file_contents()
with invocations of the corresponding new ones. Create a local
libxl__gc gc* for the new macros to use by invoking GC_INIT(ctx) at the
top of the function, and clean it up by invoking GC_FREE at the two
exit points.
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Code cleanup - no functional changes
The convenience macro LOGE has been written to take the place of
LIBXL__LOG_ERRNO. LOGE depends on the existence of a local libgl__gc
*gc. Replace two invocations of LIBXL__LOG_ERRNO, which are in
functions that already have a libxl__gc *gc present, to invocations
of the new macro.
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Code cleanup - no functional changes
The convenience macro GCSPRINTF has been written to be used in place
of libxl__sprintf(). Replace all calls to libxl__sprintf() in
libxl_utils.c with invocations of the new macro.
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Code cleanup -- no functional changes
The convenience macro GCSPRINTF has been written to be used in place of
libxl_sprintf. Change all calls to libxl_sprintf() in libxl_qmp.c to
invocations of the new macro.
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Code cleanup -- no functional changes
Coding style has recently been changed for libxl. The convenience
macro LOGE() has been introduced, and invocations of the old macro
LIBXL__LOG_ERROR() are to be replaced with it. Change all occurences
of the old macro (in functions that have a local libxl_gc *gc) except
the one in register_serials_chardev_callback() to the new one. (This
function lacks a local libxl__gc *gc, which LOGE() requires.)
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Coding style has recently been changed for libxl. The convenience
macro LOG() has been introduced, and invocations of the old macro
LIBXL__LOG() are to be replaced with it. Change occurences of the
old macro to the new one in the functions qmp_handle_response()
and qmp_handle_error_response(). The new macros need access to a
local libxl__gc *gc, so add it as a parameter to both these functions,
and pass the instance in qmp_next() down the call chain to
qmp_handle_response() and in turn to qmp_handle_error_response().
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[ijc -- reverted one unintential w/s change]
Add the necessary logic in libxl to allow it to act as a listener for
launching backends in a driver domain, replacing udev (like we already
do on Dom0). This new functionality is acomplished by watching the
domain backend path (/local/domain/<domid>/backend) and reacting to
device creation/destruction.
The way to launch this listener daemon is from xl, using the newly
introduced "devd" command. The command will daemonize by default,
using "xldevd.log" as it's logfile. Optionally the user can force the
execution of the listener in the foreground by passing the "-F"
option to the devd command.
Current backends handled by this daemon include Qdisk, vbd and vif
device types.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When running libxl from a driver domain there's no xenstore pid file
(because xenstore is not running on the driver domain). Also, at that
point in libxl initialization there's no way to know wether libxl is
running on a domain different than Dom0, so just revert the change in
order to allow libxl to work on driver domains.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Move the daemonizer code from create_domain into it's own function
that can be called from other places different than create_domain.
This will be used to daemonize the driver domain backend handler.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Current Qemu launch functions in libxl require the usage of data
structures only avaialbe on domain creation. All this information is
not need in order to launch a Qemu instance to serve Qdisk backends,
so introduce a new simplified helper that can be used to launch
Qemu/Qdisk, that will be used to launch Qdisk in driver domains.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Anthony PERARD <anthony.perard@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In libxl__need_xenpv_qemu check that the backend domain of the Qdisk
device is Dom0 before launching a Qemu instance in the toolstack
domain.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When Qemu is launched from a driver domain to act as a PV disk
backend we can make sure that Qemu is running before detaching
devices, so there's no need for the bodge there.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Synchronize the clean up of the backend from the toolstack domain when
the driver domain has actually finished closing the backend for the
device.
This is accomplished by waiting for the driver domain to remove the
directory containing the backend keys, then the toolstack domain will
finish the cleanup by removing the empty folders on the backend path.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If libxl is executed inside a guest domain it needs write access to
the local libxl xenstore dir (/local/<domid>/libxl) to store internal
data. This also applies to Qemu which needs a
/local/<domid>/device-model xenstore directory.
This patch creates the mentioned directories for each guest launched
from libxl.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In order to set up the grant table for HVM guests, libxc needs to map
the grant table temporarily. At the moment, it does this by adding the
grant page to the HVM guest's p2m table in the MMIO hole (at gfn 0xFFFFE),
then mapping that gfn, setting up the table, then unmapping the gfn and
removing it from the p2m table.
This breaks with PVH guests with 4G or more of ram, because there is
no MMIO hole; so it ends up clobbering a valid RAM p2m entry, then
leaving a "hole" when it removes the grant map from the p2m table.
Since the guest thinks this is normal ram, when it maps it and tries
to access the page, it crashes.
This patch maps the page at max_gfn+1 instead.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If the named path is a leaf node, libxl__xs_directory can succeed,
returning non-null, but set *nb to 0.
In three places in libxl this may result in a zero size argument being
passed to malloc() or realloc(), which is not adviseable.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxl__wait_for_device_model blocks, with the ctx lock held, waiting
for a response from the device model. If the dm doesn't respond
quickly (for example, because it has crashed), this may block the
whole process. Explain this in a comment, rename the function to
libxl__wait_for_device_model_deprecated, and explain what to use
instead.
libxl__wait_for_offspring is the core implementation for the above.
Its name leads people to think it might be generally useful for
waiting for children, which is far from the case. It only waits for
xenstore. Also it has the problems described above. Explain this,
rename it to libxl__xenstore_child_wait_deprecated, and explain what
to use instead.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxl__datacopier_prefixdata would prepend a deliberately short block
(not just a half-full one, but one with a short buffer) to the
dc->bufs queue. However, this is wrong because datacopier_readable
will find it and try to continue to fill it up.
Instead, allocate a full-sized buffer.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Tested-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Without this, code interrupted by SIGCHLD may experience strange
values of errno. (As far as I know this is not the cause of any
reported bugs.)
This fix should be backported in due course.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Allow a domain updating existing xenstore keys even if it has already reached
its max entries limit
As updating existing key won't increase the number of entries belonging to a
domain, we should avoid checking the max entries limit prematurely. The patch
addresses this issue in the following functions: write/add, mkdir, setperms.
Signed-off-by: Zheng Li <zheng.li@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Libxl functions such as libxl_domain_create_new take large structs
of configuration parameters. Often, we would like to use the default
values for many of these parameters.
The struct and keyed-union types in libxl have init functions, which
fill in the defaults for a given type. This commit provides an OCaml
interface to obtain records of defaults by calling the relevant init
function.
These default records can be used as a base to construct your own
records, and to selectively override parameters where needed.
For example, a Domain_create_info record can now be created as follows:
Xenlight.Domain_create_info.({ default ctx () with
ty = Xenlight.DOMAIN_TYPE_PV;
name = Some vm_name;
uuid = vm_uuid;
})
For types with KeyedUnion fields, such as Domain_build_info, a record
with defaults is obtained by specifying the type key:
Xenlight.Domain_build_info.default ctx ~ty:Xenlight.DOMAIN_TYPE_HVM ()
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The libxl IDL is based on C type "char *", and therefore "strings" can
by NULL, or be an actual string. In ocaml, it is common to encode such
things as option types.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In order to avoid newly created OCaml values from being GC'ed, they must be
registered as roots with the GC, before an iteration of the GC may happen. The
Val_* functions potentially allocate new values on the OCaml heap, and may
trigger an iteration of the OCaml GC.
The way to register a value with the GC is to assign it to a variable declared
with a CAMLparam or CAMLlocal macro, which put the value into a struct that
can be reached from a GC root.
This leads to slightly weird looking C code, but avoids hard to find segfaults.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This allows setting the namespace for values of an Enumeration to be different
from the namespace of the Enumeration itself.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Since the context has a logger we can get rid of the logger built into these
bindings and use the xentoollog bindings instead.
The gc is of limited use when most things are freed with libxl_FOO_dispose,
so get rid of that too.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Rather than allocating a new context for every libxl call begin to
switch to a model where a context is allocated by the caller and may
then be used for multiple calls down into the library.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Ian Campbell
Kelley Nielsen
Roger Pau Monne
George Dunlap
Mukesh Rathor
Ian Jackson
David Vrabel
Matthew Daley
Zheng Li
Rob Hoes