There are various reasons it should be daemonized, but the particular
problem we hit was that YaST called "xm create" and waited on output on
stdout/stderr; xm then spawned vncviewer (which never closed its
inherited stdout and stderr); xm then would exit, but YaST still had
open file descriptors, and therefore waited forever. It would be
possible to work around in YaST, but it seemed cleaner to daemonize
vncviewer.
Signed-off-by: Charles Coffing <ccoffing@novell.com>
or of non-existent domain.
I saw the following error message. (A domain of domain name XXX does
not exist.)
# xm list
Name ID Mem(MiB) VCPUs State Time(s)
Domain-0 0 1019 2 r----- 29.8
# xm destroy XXX
Error: an integer is required
This patch fixes it to print the following error message.
# xm list
Name ID Mem(MiB) VCPUs State Time(s)
Domain-0 0 1019 2 r----- 35.8
# xm destroy XXX
Error: the domain 'XXX' does not exist.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
The device-type was not added to the device details which caused
cdrom devices to appear as harddisks after a reboot.
From: Alex Brett <Alex.Brett@xensource.com>
Signed-off-by: Christian Limpach <Christian.Limpach@xensource.com>
the corresponding fields to the PCI bus manager via sysfs nodes:
/sys/bus/pci/drivers/pciback/quirks
/sys/bus/pci/drivers/pciback/permissive
xend reads the policy file every time it creates a new domain that was
assigned a PCI device.
Signed-off-by: Chris Bookholt <hap10@tycho.ncsc.mil>
- add vncviewer option to qemu-dm to spawn a vncviewer process.
- add the `vncconsole' config parameter which enables qemu-dm's vncviewer
option.
Based on a patch from: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Christian Limpach <Christian.Limpach@xensource.com>
Also add vncdisplay= option which allows setting the display number
instead of using the default display number (= domid).
Signed-off-by: Christian Limpach <Christian.Limpach@xensource.com>
Remove the ne2000 option, the network device type can now be selected
on a per-device basis by adding a model= property to the device's entry
in the vif list.
Signed-off-by: Christian Limpach <Christian.Limpach@xensource.com>
migration, since old and new domains can coexist at same time
with same uuid.
Possibly this patch could be accepted if xend were to be able to
deal with localhost migration (and save/restore, which can also
occasionally race).
Signed-off-by: Keir Fraser <keir@xensource.com>
This patch adds new xm subcommands to support working with resource
labels. The new subcommands are 'xm resources', 'xm rmlabel', 'xm
getlabel' and 'xm dry-run'. In addition, the 'xm addlabel' subcommand
now uses an updated syntax to support labeling both domains and
resources. See the xm man page for details on each subcommand.
Beyond the new subcommands, this patch allows users to immediately see
when security checks will fail by pushing some basic security checking
into the beginning of 'xm create' and 'xm block-attach'. ACM security
attributes for block devices are added to XenStore in order to support
the final security enforcement, which will be performed in the kernel
and included in a separate patch.
Signed-off-by: Bryan D. Payne <bdpayne@us.ibm.com>
Signed-off-by: Reiner Sailer <sailer@us.ibm.com>
even if the user specifies maxmem in config. This patch uses maxmem
value to set maxmem instead of memory.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
A check_uuid() in this patch checks on uuid of the
VM configuration definition. If specified uuid is
already used with the others VM, the xm create command
does not create the VM. The xm create command error occurs.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
command doesn't give a command error. This problem is also
included in the xm shutdown command.
This patch checks on domain parameter. If two or more domain
parameters are given, the command error occurs.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
use xml.marshal.
This patch adds new xm subcommands to support working with resource
labels. The new subcommands are 'xm resources', 'xm rmlabel', 'xm
getlabel' and 'xm dry-run'. In addition, the 'xm addlabel' subcommand
now uses an updated syntax to support labeling both domains and
resources. See the xm man page for details on each subcommand.
Beyond the new subcommands, this patch allows users to immediately see
when security checks will fail by pushing some basic security checking
into the beginning of 'xm create' and 'xm block-attach'. ACM security
attributes for block devices are added to XenStore in order to support
the final security enforcement, which will be performed in the kernel
and included in a separate patch.
Signed-off-by: Bryan D. Payne <bdpayne@us.ibm.com>
Signed-off-by: Reiner Sailer <sailer@us.ibm.com>
labels. The new subcommands are 'xm resources', 'xm rmlabel', 'xm
getlabel' and 'xm dry-run'. In addition, the 'xm addlabel' subcommand
now uses an updated syntax to support labeling both domains and
resources. See the xm man page for details on each subcommand.
Beyond the new subcommands, this patch allows users to immediately see
when security checks will fail by pushing some basic security checking
into the beginning of 'xm create' and 'xm block-attach'. ACM security
attributes for block devices are added to XenStore in order to support
the final security enforcement, which will be performed in the kernel
and included in a separate patch.
Signed-off-by: Bryan D. Payne <bdpayne@us.ibm.com>
Signed-off-by: Reiner Sailer <sailer@us.ibm.com>
debugging xend as it has multiple processes, and it can be hard to
work out which one is doing what without this information.
Signed-Off-By: Horms <horms@verge.net.au>
This fixes the case where crashing/restarting a domain can cause dom0 to balloon more than
necessary.
I changed the physinfo dictionary in Python to be in KiB, rather than
MiB, to avoid accumulating ugly rounding errors. I tried to avoid
changing units anywhere else.
Signed-off-by: Charles Coffing <ccoffing@novell.com>
1. Remove has_long_option() and add arg_check_for_resource_list()
instead.
2. 'args' tells 'options' from 'params' by using gnu_getopt().
3. 'options' checks whether -l/--long option is specified.
4. If 'params' not given, print out 'No domain parameter given'
and usage.
5. If 'params' given multiple domains, print out
'No multiple domain parameters allowed' and usage.
6. Then it displays the resources as usual.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
shouldn't be needed but it appears to be necessary as the Python client
just does a wfile.read() instead of only reading the reported Content-Length.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is quite minimal
in its approach, satisfying the purposes of the paravirtualized
NetWare operating system as well as any others that expect the time
base to be provided in localtime.
Signed-off-by: Bruce Rogers <brogers@novell.com>
transport when running on Python <2.4. SSHTransport uses the new subprocess
class, and so it doesn't work on older versions.
Signed-off-by: Ewan Mellor <ewan@xensource.com>
