Update libxc to 4.6.
Update libxl to 4.6.
Update libxlu to 4.6.
I did
git-grep 'MAJOR.*='
and also to check I had everything
git-grep 'SONAME_LDFLAG' | egrep -v 'MAJOR' |less
The other, un-updated, libraries are:
blktap2 (control, libvhd) 1.0 in-tree users only, no ABI changes
libfsimage 1.0 no ABI changes
libvchan 1.0 no ABI changes
libxenstat 0.0 (!) no ABI changes
libxenstore 3.0 no ABI changes
My assertions "no ABI changes" are based on the output of
git-diff origin/stable-4.5..staging .
and similar runes, sometimes limited to .h files.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
v2: Bump libxlu too. [ Reported by Wei Liu. ]
It is no longer used.
One complication is that xc_map_m2p() has users in xc_offline_page.c,
xen-mfndump and xen-mceinj. Move its implementation into
xc_offline_page (for want of a better location) beside it's current
user.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- drop mentions of removed files from MAINTAINERS ]
This is a complicated set of changes which must be done together for
bisectability.
* libxl-save-helper is updated to unconditionally use libxc migration v2.
* libxl compatibility workarounds in libxc are disabled for save operations.
* libxl__stream_write_start() is logically spliced into the event location
where libxl__xc_domain_save() used to reside.
* Ownership of the helper state moves into stream_write_state.
* xl is updated to indicate that the stream is now v2
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
v4:
* Don't use _init() needlessly
v3: Many small changes, follwing similar review to the restore side
This is a complicated set of changes which must be done together for
bisectability.
* libxl-save-helper is updated to unconditionally use libxc migration
v2.
* libxl compatibility workarounds in libxc are disabled for restore
operations.
* libxl__stream_read_start() is logically spliced into the event
location where libxl__xc_domain_restore() used to reside.
* Ownership of the save_helper_state moves to stream_read_state.
The parameters 'hvm', 'pae', and 'superpages' were previously
superfluous, and are completely unused in migration
v2. callbacks->toolstack_restore is handled via a migration v2 record
now, rather than via a callback from libxc.
NB: this change breaks Remus. Further untangling needs to happen
before Remus will function.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
v4:
* Don't use _init() needlessly
v3:
* Simplify from v2.
* Alter the ownership of save_helper_state
v2:
* Drop "legacy_width" from the IDL
* Gain a LIBXL_HAVE_ to signify support of migration v2 streams
These changes cause migration v2 to behave similarly enough to legacy
migration to function for HVM guests under an unmodified xl/libxl.
The migration v2 work for libxl will fix the layering issues with the
toolstack and qemu records, at which point this patch will be unneeded.
It is however included here for people wishing to experiment with migration v2
ahead of the libxl work.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Restore the x86 HVM specific parts of a domain. This is the HVM_CONTEXT and
HVM_PARAMS records.
There is no need for any page localisation.
This also includes writing the trailing qemu save record to a file because
this is what libxc currently does. This is intended to be moved into libxl
proper in the future.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Save the x86 HVM specific parts of the domain. This is considerably simpler
than an x86 PV domain. Only the HVM_CONTEXT and HVM_PARAMS records are
needed.
There is no need for any page normalisation.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Restore the x86 PV specific parts. The X86_PV_INFO, the P2M_FRAMES,
SHARED_INFO, and VCPU context records.
The localise_page callback is called from the common PAGE_DATA code to convert
PFNs in page tables to MFNs.
Page tables are pinned and the guest's P2M is updated when the stream is
complete.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Save the x86 PV specific parts of a domain. This is the X86_PV_INFO record,
the P2M_FRAMES, the X86_PV_SHARED_INFO, the three different VCPU context
records, and the MSR records.
The normalise_page callback used by the common code when writing the PAGE_DATA
records, converts MFNs in page tables to PFNs.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Add functions common to save and restore of x86 PV guests. This includes
functions for dealing with the P2M and M2P and the VCPU context.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Save/restore records common to all x86 domain types (HVM, PV).
This is only the TSC_INFO record.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Provide the C structures matching the binary (wire) format of the new
stream format. All header/record fields are naturally aligned and
explicit padding fields are used to ensure the correct layout (i.e.,
there is no need for any non-standard structure packing pragma or
attribute).
Provide some helper functions for converting types to string for
diagnostic purposes.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
For testing purposes, the environmental variable "XG_MIGRATION_V2" allows the
two save/restore codepaths to coexist, and have a runtime switch.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
In preparation for allowing for introspecting ARM and PV domains the old
control interface via the hvm_op hypercall is retired. A new control mechanism
is introduced via the domctl hypercall: monitor_op.
This patch aims to establish a base API on which future applications can build
on.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Tim Deegan <tim@xen.org>
In this patch we mechanically rename mem_event to vm_event. This patch
introduces no logic changes to the code. Using the name vm_event better
describes the intended use of this subsystem, which is not limited to memory
events. It can be used for off-loading the decision making logic into helper
applications when encountering various events during a VM's execution.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The legacy save/restore infrastructure requires several function pointers from
the toolstack (libxl or Xend in the past) in order to work, and for HVM guests
also need to be able to play around in dom0's filesystem to move the device
model save record.
Migration v2 changes some of this, but is similarly dependent on
toolstack-provided function pointers.
Someone who wishes to re-architect the interaction of moving parts for running
a domain might be in a position to re-enabled this, but for now, explicitly
fail with ENOSYS (from xc_nomigrate.c) rather than failing with an error about
a missing function pointer (or indeed falling over a NULL pointer on certain
paths).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Introduced some new xl commands to enable/disable Cache Monitoring
Technology(CMT) feature.
The following two commands is to attach/detach the CMT feature
to/from a certain domain.
$ xl psr-cmt-attach domid
$ xl psr-cmt-detach domid
This command is to display the CMT information, such as L3 cache
occupancy.
$ xl psr-cmt-show cache_occupancy <domid>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Xen added a new platform_op hypercall for generic MSR access, and this
is the the tool side change to wrapper the hypercall into xc APIs.
For non-preemptible batch resource operations, group them in entries of
xc_resource_op structure. For preemptible ones, use multiple
xc_resource_op structure instead.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add xc_sched_rtds_* functions to interact with Xen to set/get domain's
parameters for rtds scheduler.
Note: VCPU's information (period, budget) is in microsecond (us).
Signed-off-by: Meng Xu <mengxu@cis.upenn.edu>
Signed-off-by: Sisu Xi <xisisu@gmail.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
[ ijc -- xenctrl.h has moved to tools/libxc/include, adjust patch to match ]
Also moves xc_dom.h to include as it is used often by other xen tools.
Use the new include subdirectories to build Xen tools, qemu-xen and
stubdoms.
Add the old libxc include path to the programs that need it to build,
on a case by case basis and commeting that they shouldn't require
internal libxc headers to build.
[ And: update QEMU_TRADITIONAL_REVISION to corresponding qemu patch
- Ian jackson ]
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In preparation to remove hardcoded /var/run/xen paths, provide
XEN_RUN_DIR and related directories to xc_private.h. Similar code exists
already for libxl, stubdom and other parts.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Introduce a new build variable "nosharedlibs".
In tools/libxc use it instead of $(stubdom).
In tools/xenstore honour it, and build static clients.
If shared libs are disabled, do not try to install or symlink them.
Set nosharedlibs when building for MiniOS or NetBSDRump.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
---
v2: Clarify deliberate INSTALL_SHLIB and SYMLINK_SHLIB breakage.
INSTALL_SHLIB is like INSTALL_PROG but used only for shared libraries.
SYMLINK_SHLIB is the ln -sf rune for shared library symlinks.
Use these in the appropriate places in tools/libxc and tools/xenstore.
No functional change right now. In a forthcoming patch these
variables might take on different values.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The following two patches break both libxc and libxl ABI and
API, so we better bump the MAJORs.
Of course, for libxl, proper measures are taken (in the
relevant patch) in order to guarantee API stability.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add the FreeBSD implementation of the privcmd and evtchn devices
interface.
The evtchn device interface is the same as the Linux one, while the
privcmd map interface is simplified because FreeBSD only supports
IOCTL_PRIVCMD_MMAPBATCH.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The ifdef sections are not enabled at all in tree, and their justification is
out of date now that Xen hypercall support exists upstream in valgrind.
This also removes a commented-out tweak to CFLAGS in the libxc Makefile which
is not being used, and becomes stale given this patch. In the unlikely event
that any developers were using the line, the results can be more easily
achieved by tweaking APPEND_CFLAGS in the environment.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
There have been ABI/API changes in libxc. Bump its MAJOR (which
affets libxenguest et al too.)
There have been ABI changes in libxl. Bump its MAJOR.
(The API changes have been dealt with as we go along - there is
already a LIBXL_API_VERSION 0x040400.)
None of the other libraries have changed their interfaces. I have
verified this by building the tools and searching the dist/install
tree for files matching *.so.*. For each library that showed up, I
did this:
git-diff RELEASE-4.3.0..staging -- `find tools/FOO/ -name \*.h`
where FOO is the corresponding source directory.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Since there's no shared or static library to link against, this simply
re-uses the hypervisor side code. However, I only audited the code
added here for possible security issues, not the referenced code in
the hypervisor tree.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed integers have undesirable undefined behaviours on overflow.
Malicious compilers can turn apparently-correct code into code with
security vulnerabilities etc.
So use only unsigned integers. Exceptions are booleans (which we have
already changed) and error codes.
We _do_ change all the chars which aren't fixed constants from our own
text segment, but not the char*s. This is because it is safe to
access an arbitrary byte through a char*, but not necessarily safe to
convert an arbitrary value to a char.
As a consequence we need to compile libelf with -Wno-pointer-sign.
It is OK to change all the signed integers to unsigned because all the
inequalities in libelf are in contexts where we don't "expect"
negative numbers.
In libelf-dominfo.c:elf_xen_parse we rename a variable "rc" to
"more_notes" as it actually contains a note count derived from the
input image. The "error" return value from elf_xen_parse_notes is
changed from -1 to ~0U.
grepping shows only one occurrence of "PRId" or "%d" or "%ld" in
libelf and xc_dom_elfloader.c (a "%d" which becomes "%u").
This is part of the fix to a security issue, XSA-55.
For those concerned about unintentional functional changes, the
following rune produces a version of the patch which is much smaller
and eliminates only non-functional changes:
GIT_EXTERNAL_DIFF=.../unsigned-differ git-diff <before>..<after>
where <before> and <after> are git refs for the code before and after
this patch, and unsigned-differ is this shell script:
#!/bin/bash
set -e
seddery () {
perl -pe 's/\b(?:elf_errorstatus|elf_negerrnoval)\b/int/g'
}
path="$1"
in="$2"
out="$5"
set +e
diff -pu --label "$path~" <(seddery <"$in") --label "$path" <(seddery <"$out")
rc=$?
set -e
if [ $rc = 1 ]; then rc=0; fi
exit $rc
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
v8: Use "?!?!" to express consternation instead of a ruder phrase.
v5: Introduce ELF_NOTE_INVALID, instead of using a literal ~0U.
v4: Fix regression in elf_round_up; use uint64_t here.
v3: Changes to booleans split off into separate patch.
v2: BUGFIX: Eliminate conversion to int of return from elf_xen_parse_notes.
BUGFIX: Fix the one printf format thing which needs changing.
Remove irrelevant change to constify note_desc.name in libelf-dominfo.c.
In xc_dom_load_elf_symtab change one sizeof(int) to sizeof(unsigned).
Do not change type of 2nd argument to memset.
Provide seddery for easier review.
Style fix.
This file is not actually used. It's not built in Xen's instance of
libelf; in libxc's it's built but nothing in it is called. Do not
compile it in libxc, and delete it.
This reduces the amount of work we need to do in forthcoming patches
to libelf (particularly since as libelf-relocate.c is not used it is
probably full of bugs).
This is part of the fix to a security issue, XSA-55.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Chuck Anderson <chuck.anderson@oracle.com>
libxc (libxenctrl, libxenguest):
New claim_enabled field in struct xc_dom_image;
New nr_outstanding_pages field in struct xc_dominfo;
New fields in struct xc_hvm_build_args (xenguest.h).
libxl:
new fields in dominfo domain_build_info device_vfb device_vkb
device_disk etc. etc. etc.
libxlu #includes libxl headers so needs to inherit its new soname
Use Xen version for new sonames since we don't in fact guarantee
ABI (as opposed to API) stability across releases.
xenstore (libxenstore):
New flag XS_UNWATCH_FILTER, so bump minor version only.
This was the result of reviewing the output from:
git-checkout staging
cd tools
git-diff RELEASE-4.2.2 `find -name \*.h`
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add decompressors based on hypervisor code. This are used in mini-os by
pv-grub.
This enables pv-grub to boot kernels compressed with e.g. xz, which are
becoming more common.
Signed-off-by: Bastian Blank <waldi@debian.org>
Adjusted to use terminology "unsafe" rather than "trusted" to indicate
that the user had better sanitise the data (or not care, as in stub
domains) as suggested by Tim Deegan. This was effectively a sed script.
Minimise the changes to hypervisor code by moving the "compat layer" into the
relevant libxc source files (which include the Xen ones).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Removed support from libxc and mini-os.
This also took me under xen/include/public via various symlinks.
Dropped tools/debugger/xenitp entirely, it was described upon commit
as:
"Xenitp is a low-level debugger for ia64" and doesn't appear to be
linked into the build anywhere.
99 files changed, 14 insertions(+), 32361 deletions(-)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Introduce an empty implementation of the arch specific ARM functions in
xc_dom_arm.c.
Provide empty implementations of xc_domain_save and xc_domain_restore
when CONFIG_MIGRATE is not set.
Move xc_hvm_build.c to xc_hvm_build_x86.c because the implementation is
x86 specific, introduce xc_hvm_build_arm.c with empty stubs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
It is not correct to say -lpthread. The correct option is -pthread,
which may have sundry other effects on code generation etc. It needs
to be passed both to compilation and linking.
Fix the configure test to test -pthread, and plumb the resulting flag
through to PTHREAD_{CFLAGS,LDFLAGS} in Tools.mk; also substitute
PTHREAD_LIBS (although this will currently always be empty).
Remove PTHREAD_LIBS setting from StdGNU.mk.
Fix the one user (libxc) to use PTHREAD_{CFLAGS,LDFLAGS} too.
There are still some other users in tree which pass -pthread or
-lpthread by adding it as a literal to their own compiler options.
These will be fixed in a later patch.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Introduce an empty implementation of the arch specific ARM functions in
xc_core_arm.c and xc_core_arm.h; define barriers on ARM.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Instead of sending dirty pages of guest memory as-is, use a simple compression
algorithm that sends a RLE-encoded XOR of the page against its last sent copy.
A small LRU cache is used to hold recently dirtied pages. Pagetable pages are
sent as-is, as they are canonicalized at sender side and uncanonicalized at
receiver.
[ Fixed up a conflict in sg_save_restore.h. I had to increase the
ID values used from -11 and -12 to -12 and -13 because -11 had
been taken by ..._HVM_VIRIDIAN in the meantime. -iwj ]
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Brendan Cully <brendan@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Create two new variables called APPEND_ and PREPEND_ to add compile
flags at the beginning or at the end of the search path.
Added a new semantic for user defined compile flags, here is the list
of possible options:
PREPEND_LIB: add libraries to the search path before xen
(before xen installation folders).
PREPEND_INCLUDES: add headers to the search path before xen
(before xen installation folders).
APPEND_LIB: add libraries to the search path at the end
(after all xen installation folders have been added).
APPEND_INCLUDES: add libraries to the search path at the end
(after all xen installation folders have been added).
EXTRA_INCLUDES and EXTRA_LIB can still be used, and they will have the
same effect as PREPEND_INCLUDES and PREPEND_LIB.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Up to now a single ring buffer was used for mem_share, xenpaging and
xen-access. Each helper would have to cooperate and pull only its own
requests from the ring. Unfortunately this was not implemented. And
even if it was, it would make the whole concept fragile because a crash
or early exit of one helper would stall the others.
What happend up to now is that active xenpaging + memory_sharing would
push memsharing requests in the buffer. xenpaging is not prepared for
such requests.
This patch creates an independet ring buffer for mem_share, xenpaging
and xen-access and adds also new functions to enable xenpaging and
xen-access. The xc_mem_event_enable/xc_mem_event_disable functions will
be removed. The various XEN_DOMCTL_MEM_EVENT_* macros were cleaned up.
Due to the removal the API changed, so the SONAME will be changed too.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
Ian Jackson
Andrew Cooper
Tamas K Lengyel
Dario Faggioli
Wei Liu
Olaf Hering
Tamas K Lengyel
Chao Peng
Dongxiao Xu
Meng Xu
Stefano Stabellini
Roger Pau Monne
David Vrabel
Jan Beulich
Bastian Blank
Ian Campbell
Roger Pau Monne
Shriram Rajagopalan