This adds a new HVM op that enables tracking dirty bits of a range of
video RAM. The idea is to optimize just for the most common case
(only one guest mapping, with sometimes some temporary other
mappings), which permits to keep the overhead on shadow as low as
possible.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
In the xc_translate_foreign_address function from libxc, there is a
check on the page directory entry to see if the page is 4K or 4M.
However, the check is looking at bit 3, when it should be looking at
bit 7. This patch fixes the problem.
Signed-off-by: Bryan D. Payne <bryan@thepaynes.cc>
- When we overwrite a cpuid's input, apply the default policy
for the other registers.
- For the python binding, get unsigned long instead long.
- Fix the multiple inputs cpuid's configuration parsing.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Currently it only inercept access to MSI config space, no MSI-x support.
Signed-off-by: Jiang Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Shan Haitao <haitao.shan@intel.com>
CPUID's replies are now pre-calculated in libxc and given to the
hypervisor via a new domctl.
There are two parts to this feature:
- We can overwrite cpuid's replies.
- We can check that a vm is compatible with a host's processor.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
definitely does not leak out of tools/libxc. Return to the
ioemu/osdep.c way of checking for posix_memalign() as this works on
Solaris.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
mlock()ed across other hypercall invocations, to avoid aliasing with
other hypercall arguments, causing spurious unlocking.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
We use the EPT page table as P2M (guest physical to machine
mapping), removing the linear page table when EPT is used for the
domain (see the new file p2m-ept.c). We did this by adding three
operations in the p2m_domain. If VT-d is enabled, the EPT page table
will be used as the VT-d page table as well (i.e. shared).
Signed-off-by: Xin Li <xin.b.li@intel.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xiaohui Xin <Xiaohui.xin@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
The latest -mm kernel (2.6.25-rc3-mm1) contains v2.08 of the Linux
bzImage format which embeds an ELF file in place of the raw payload
allowing it to be extracted and used by the Xen domain builder.
It is expected that this functionality will be put forward for 2.6.26.
Signed-off-by : Ian Campbell <ijc@hellion.org.uk>
The memory permutation cause a slow down in case of a save/restore
(bug 1143). It works better when the mixing is done with 2MB chunks.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
This patch adds the ability to set the number of slots that may be
used for mapping grant references, using the gntdev user-space grant
reference mapping driver.
Signed-off-by: Derek Murray <Derek.Murray@cl.cam.ac.uk>
evtchn_bind_interdomain used to clear any already pending event before
binding a handler, because else the handler may be called before it is
ready. That however leads to missed events, which I had to workaround
for the HVM case.
This changes the semantics of bind_evtchn, and thus of all the
event channel binding functions (bind_virq, evtchn_alloc_unbound,
evtchn_bind_interdomain) into not unmasking the event itself, hence
letting the caller initialize properly before unmasking the port (e.g.
record the port number in an appropriate place).
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
privcmd_hypercall_t only has 5 args. This causes a build failure
with gcc-4.3. Fixes bugzilla #1186.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
This fixes a bug: by using pfn 0 for console, the page was not cleared,
sometimes causing the domain to fail to boot.
Signed-off-by: Tristan Gingold <tgingold@free.fr>
** Currently only 2 virtual hotplug pci slots(6~7) are created so more
than 2 vtd dev can't be hotplugged, but we can easily extend it in
future.
Three new commands are added:
"xm pci-list domid" show the current assigned vtd device, like:
VSlt domain bus slot func
0x6 0x0 0x02 0x00 0x0
"xm pci-detach" hot remove the specified vtd device by the virtual
slot, like:
xm pci-detach EdwinHVMDomainVtd 6
"xm pci-attach DomainID dom bus dev func [vslot]" hot add a new vtd
device in the vslot. If no vslot specified, a free slot will be picked
up. e.g. to insert '0000:03:00.0':
xm pci-attach EdwinHVMDomainVtd 0 3 0 0
** guest pci hotplug
linux: pls. use 2.6.X and enable ACPI PCI hotplug ( Bus options=> PCI
hotplug => ACPI PCI hotplug driver )
windows: 2000/xp/2003/vista are all okay
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
by removing some obvious typos, handling CR3 folding and hvirt_start
based on guest word-size, and understanding 32-bit INVALID_MFN.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
- Move PAGE_SIZE and STACK_SIZE into __PAGE_SIZE and __STACK_SIZE in
arch_limits.h so as to permit getting them from there without
pulling all the internal Mini-OS defines.
- Setup a xen-elf cross-compilation environment in stubdom/cross-root
- Add a POSIX layer on top of Mini-OS by linking against the newlib C
library and lwIP, and implementing the Unixish part in mini-os/lib/sys.c
- Cross-compile zlib and libpci too.
- Add an xs.h-compatible layer on top of Mini-OS' xenbus.
- Cross-compile libxc with an additional xc_minios.c and a few things
disabled.
- Cross-compile ioemu with an additional block-vbd, but without sound,
tpm and other details. A few hacks are needed:
- Align ide and scsi buffers at least on sector size to permit
direct transmission to the block backend. While we are at it, just
page-align it to possibly save a segment. Also, limit the scsi
buffer size because of limitations of the block paravirtualization
protocol.
- Allocate big tables dynamically rather that letting them go to
bss: when Mini-OS gets installed in memory, bss is not lazily
allocated, and doing so during Mini-OS is unnecessarily trick while
we can simply use malloc.
- Had to change the Mini-OS compilation somehow, so as to export
Mini-OS compilation flags to the Makefiles of libxc and ioemu.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
mb/rmb/wmb. Instead add a xen_ prefix. Modify Xen's public headers to
expect the prefixed names instead of bare mb/rmb/wmb, but gate this
expectation on a bump of __XEN_INTERFACE_VERSION__.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
In live migration, a domain is paused and *entire* memory is copied
after pre-copy phase.
(i.e. live migration is not live)
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
Stubdomains (and probably other domain disagregation elements too)
need to be able to tinker with another domain. This adds IS_PRIV_FOR
that extends IS_PRIV by allowing domains to have privileges over a
given "target" domain. XEN_DOMCTL_set_target permits to set this
"target". A new 'target' configuration option makes the domain builder
use it.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
Keir Fraser
Alex Williamson