Only lightly tested with a Linux HVM guest PXE boot.
Accept the defaults for the config options. Many of them are not
relevant to Xen but this matches what others (at least the Debian
SeaBIOS packages and the binary shipped by Qemu) are doing. The
Debian Xen packages are built against Debian's SeaBIOS package so
there is value in being similar.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
- move 32-bit specific files into subarch specific arm32 subdirectory.
- move gic.h to xen/include/asm-arm (it is needed from both subarch
and generic code).
- make the appropriate build and config file changes to support
XEN_TARGET_ARCH=arm32.
This prepares us for an eventual 64-bit subarch.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Centralise the version check in Config.mk. Any more strict version
requirements can be added to specific subdirs/arches.
Signed-off-by: Keir Fraser <keir@xen.org>
RPM based packaging systems expect binaries to have debug symbols which get
placed in a separate debuginfo RPM.
Split the concept of a debug build up so that binaries can be built with
debugging symbols without having the other gubbins which $(debug) implies, most
notibly frame pointers.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch was constructed by grepping for xensource.com over the entire
repository and eyeballing which ones were sensible to update.
In addition, the xen-tools mailing list has been deprecated, so update xentop
to refer to xen-devel instead.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Currently shared libraries are automatically installed into /usr/lib
or /usr/lib64, depending on the supplied --prefix value and
$(XEN_TARGET_ARCH). Some systems, like recent Debian and Ubuntu releases,
do not use /usr/lib64, but instead /usr/lib/x86_64-linux-gnu.
With this change, packagers can supply the desired location for shared
libraries on the ./configure command line. Packagers need to note that
the default behaviour on 64-bit Linux systems will be to install shared
libraries in /usr/lib, not /usr/lib64, unless a --libdir value is provided
to ./configure.
Additionally, the libfsimage plugins are now loaded explicitly from
$LIBDIR/fs, removing platform-based decision trees in code.
Signed-off-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- resolve rejects in configure by rerunning autogen.sh. Dropped changes
to remove m4/default_lib.m4 and update m4/pkg.m4 since they cause LIBDIR=/lib
instead of /usr/lib. Reran ./autogen.sh after that too ]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The xenstore header xs.h is producing conflicts with other software[1].
xs is a too short identifier and does not matche the library. Renaming
the headers to xenstore.h and xenstore_lib.h is the easiest way to make
them easy recognizable and prevent furthe problems.
[1]: http://bugs.debian.org/668550
[ Also update QEMU_TAG, to bring in corresponding change to
qemu-xen-traditional. -iwj ]
Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
--HG--
rename : tools/xenstore/xs.h => tools/xenstore/xenstore.h
rename : tools/xenstore/xs_lib.h => tools/xenstore/xenstore_lib.h
clang complains about a lot of functions and macros whose return value
is unused. I started on patches to drop some functions' return values
and scatter (void)s around callers, but it was getting too messy.
Just turn off the warning instead.
Signed-off-by: Tim Deegan <tim@xen.org>
Acked-by: Keir Fraser <keir@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Switch to recently released 1.6.3.2 from upstream. This incorporates all the
changesets which we previously applied to 1.6.3.1.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
When adding autoconf support, the configuration options for XSM and
FLASK_ENABLE were incorrectly removed from Config.mk and added to the
tools configuration. Since these are hypervisor configuration options,
they should not depend on running tools configuration.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
...when specified in the guest configuration file.
This work is somewhat based on Bei Guan effort during the SoC 2011 and
relies on upstream edk2/ovmf Tianocore ROM to be built separately and
manually copied as:
Build/OvmfX64/DEBUG_GCC44/FV/OVMF.fd ->
tools/firmware/ovmf/ovmf-x64.bin
Build/OvmfIa32/DEBUG_GCC44/FV/OVMF.fd ->
toolf/firmware/ovmf/ovmf-ia32.bin
A way to integrate OVMF build directly into XEN has still be discussed
on the mailing list appropriately.
Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Disable CONFIG_OVMF by default as ovmf is not integrated into the
build.
Signed-off-by: Keir Fraser <keir@xen.org>
Committed-by: Keir Fraser <keir@xen.org>
Added autotools magic to replace custom check scripts. The previous
checks have been ported to autoconf, and some additional ones have
been added (plus the suggestions from running autoscan). Two files are
created as a result from executing configure script, config/Tools.mk
and config.h.
conf/Tools.mk is included by tools/Rules.mk, and contains most of the
options previously defined in .config, that can now be set passing
parameters or defining environment variables when executing configure
script.
config.h is only used by libxl/xl to detect yajl_version.h.
[ tools/config.sub and config.guess copied from
autotools-dev 20100122.1 from Debian squeeze i386,
which is GPLv2.
tools/configure generated using the included ./autogen.sh
which ran autoconf 2.67-2 from Debian squeeze i386. autoconf
is GPLv3+ but has a special exception for the autoconf output;
this exception applies to us and exempts us from complying
with GPLv3+ for configure, which is good as Xen is GPL2 only.
- Ian Jackson ]
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Tested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
This patch introduces configuration options allowing to built either a
rombios only or a seabios only hvmloader.
Building option ROMs like vgabios or etherboot is only enabled for a
rombios hvmloader, since SeaBIOS takes care or extracting option ROMs
itself from the PCI devices (these option ROMs are provided by the
device model and do not need to be built in hvmloader).
The Makefile in tools/firmware/ now only checks for bcc if rombios is
enabled.
These two configuration options are left on by default to remain
compatible.
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
To remain consistent with how other ROMs are built into hvmloader,
call mkhex on etherboot ROMs from the hvmloader directory, instead of
the etherboot directory. In other words, eb-roms.h is not used any
more.
Introduce ETHERBOOT_NICS config option to choose which ROMs should be
built (kept rtl8139 and 8086100e per default as before).
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Build tests as part of the tools build.
It is enabled with CONFIG_TESTS in Config.mk
Currently disabled build of tests/regressions and tests/xen-access (in
32-bit mode) as they fail.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Ian Jackson