Although this passed my smoke-tests at commit time, I'm now seeing screen
corruption on 32-bit WinXP guests. Reverting for now. :(
Signed-off-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Support is provided for both shadow and hardware assisted paging (HAP)
modes. This code bookkeeps the set of video frame buffers (vram),
detects when the guest has modified any of those buffers and, upon request,
returns a bitmap of the modified pages.
This lets other software components re-paint the portions of the monitor
(or monitors) that have changed.
Each monitor has a frame buffer of some size at some position
in guest physical memory.
The set of frame buffers being tracked can change over time as monitors
are plugged and unplugged.
Signed-off-by: Robert Phillips <robert.phillips@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Removed a stray #include and a few hard tabs.
Signed-off-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Allow a domain to be built under one security label and run using a
different label. This can be used to prevent the domain builder or
control domain from having the ability to access a guest domain's memory
via map_foreign_range except during the build process where this is
required.
Example domain configuration snippet:
seclabel='customer_1:vm_r:nomigrate_t'
init_seclabel='customer_1:vm_r:nomigrate_t_building'
Note: this does not provide complete protection from a malicious dom0;
mappings created during the build process may persist after the relabel,
and could be used to indirectly access the guest's memory. However, if
dom0 correctly unmaps the domain upon building, a the domU is protected
against dom0 becoming malicious in the future.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
At the sender
xc_domain_save has a key point: 'to query the types of all the pages
with xc_get_pfn_type_batch'
1) if broken page occur before the key point, migration will be fine
since proper pfn_type and pfn number will be transferred to the
target and then take appropriate action;
2) if broken page occur after the key point, whole system will crash
and no need care migration any more;
At the target
Target will populates pages for guest. As for the case of broken page,
we prefer to keep the type of the page for the sake of seamless migration.
Target will set p2m as p2m_ram_broken for broken page. If guest access
the broken page again it will kill itself as expected.
Suggested-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
It was convenient to invent $(CFLAGS_LIBXL) to do this.
Various renamings to avoid shadowing standard functions:
- index(3)
- listen(2)
- link(2)
- abort(3)
- abs(3)
Reduced the scope of some variables to avoid conflicts.
Change to libxc is due to the nested hypercall buf macros in
set_xen_guest_handle (used in libxl) using the same local private vars.
Build tested only.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Removed support from libxc and mini-os.
This also took me under xen/include/public via various symlinks.
Dropped tools/debugger/xenitp entirely, it was described upon commit
as:
"Xenitp is a low-level debugger for ia64" and doesn't appear to be
linked into the build anywhere.
99 files changed, 14 insertions(+), 32361 deletions(-)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Cleaning the python directory should completely remove the build/
directory, otherwise subsequent builds may be short-circuited and a
stale build installed.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This avoids the hypercall buffer becoming CoW on fork.
In multi-threads and multi-processes environment, e.g. the process has two
threads, thread A may call hypercall, thread B may call fork() to create child
process. After forking, all pages of the process including hypercall buffers
are cow. It will cause a write protection and return EFAULT error if hypervisor
calls copy_to_user in hypercall in thread A context,
Fix:
1. Before hypercall: use MADV_DONTFORK of madvise syscall to make the hypercall
buffer not to be copied to child process after fork.
2. After hypercall: undo the effect of MADV_DONTFORK for the hypercall buffer
by using MADV_DOFORK of madvise syscall.
3. Use mmap/nunmap for memory alloc/free instead of malloc/free to bypass libc.
Note:
Child processes must not use the opened xc_{interface,evtchn,gnttab,gntshr}
handle that inherits from parents. They should reopen the handle if they want
to interact with xc. Otherwise, it may cause segment fault to access hypercall
buffer caches of the handle.
Signed-off-by: Zhenguo Wang <wangzhenguo@huawei.com>
Signed-off-by: Xiaowei Yang <xiaowei.yang@huawei.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- s/ptr/p/ to fix build & tweaked the wording of the comments
slightly. ]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Make some NUMA node information available to the toolstack. Achieve
this by means of xc_numainfo(), which exposes memory size and amount
of free memory of each node, as well as the relative distances of
each node to all the others.
For properly exposing distances we need the IDL to support arrays.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
(also make note about AMD support's experimental status)
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This solves a long-standing issue in which the pages backing these rings were
pages belonging to dom0 user-space processes. Thus, if the process would die
unexpectedly, Xen would keep posting events to a page now belonging to some
other process.
We update all API-consumers in tree (xenpaging and xen-access).
This is an API/ABI change, so please speak up if it breaks your accumptions.
The patch touches tools, hypervisor x86/hvm bits, and hypervisor x86/mm bits.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
Don't use the superfluous shared page, return the event channel directly as
part of the domctl struct, instead.
In-tree consumers (xenpaging, xen-access) updated. This is an ABI/API change,
so please voice any concerns.
Known pending issues:
- pager could die and its ring page could be used by some other process, yet
Xen retains the mapping to it.
- use a saner interface for the paging_load buffer.
This change also affects the x86/mm bits in the hypervisor that process the
mem_event setup domctl.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
Introduce an empty implementation of the arch specific ARM functions in
xc_core_arm.c and xc_core_arm.h; define barriers on ARM.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
With changeset 24364:0964341efd65 an event channel based notification of
new responses in the ringbuffer is implemented. This makes the memevent
interface obsolete. Currently a call to p2m_mem_paging_resume() is
triggered twice by xenpaging, once per memevent and once per even
channel. In practice this double call does not lead to issues because
p2m_mem_paging_resume() processes only available events.
xenpaging used the event channel notification since the beginning, but
it was a no-op until changeset mentioned above. This change removes the
unneeded XENMEM_paging_op_resume functionality. Pagers are notified via
an event channel of new requests, and now they are required to notify
the hypervisor about their responses also with an event channel.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Remove costly mem_sharing audits from the inline path, and instead make them
callable as a memop.
Have the audit function return the number of errors detected.
Update memshrtool to be able to trigger audits.
Set sharing audits as enabled by default.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Adin Scannell <adin@scannell.ca>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
Per page operations in the paging, sharing, and access tracking subsystems are
all implemented with domctls (e.g. a domctl to evict one page, or to share one
page).
Under heavy load, the domctl path reveals a lack of scalability. The domctl
lock serializes dom0's vcpus in the hypervisor. When performing thousands of
per-page operations on dozens of domains, these vcpus will spin in the
hypervisor. Beyond the aggressive locking, an added inefficiency of blocking
vcpus in the domctl lock is that dom0 is prevented from re-scheduling any of
its other work-starved processes.
We retain the domctl interface for setting up and tearing down
paging/sharing/mem access for a domain. But we migrate all the per page
operations to use the memory_op hypercalls (e.g XENMEM_*).
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla>
Signed-off-by: Adin Scannell <adin@scannell.ca>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
Instead of placing string parsing inside the hypervisor, use binary
structures like other Xen hypercalls do.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
This library has been deprecated since July 2010; remove the in-tree
users and library.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
This patch sends global VIRQs to a domain designated as the VIRQ
handler
instead of sending all global VIRQ events to dom0. This is required in
order to run xenstored in a stubdom, because VIRQ_DOM_EXC must be sent
to xenstored for domain destruction to work properly.
This patch was inspired by the xenstored stubdomain patch series sent
to xen-devel by Alex Zeffertt in 2009.
Signed-off-by: Diego Ongaro <diego.ongaro@citrix.com>
Signed-off-by: Alex Zeffertt <alex.zeffertt@eu.citrix.com>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This patch is the folded version of API updates, along with the associated tool
changes to ensure that the build is always consistent.
API updates:
- The source domain in the sharing calls is no longer assumed to be dom0.
- Previously, the mem sharing code would return an opaque handle to index
shared pages (and nominees) in its global hash table. By removing the hash
table, the handle becomes a version, to avoid sharing a stale version of a
page. Thus, libxc wrappers and tools need to be updated to recall the share
functions with the information needed to fetch the page (which they readily
have).
Tool updates:
The only (in-tree, that we know of) consumer of the mem sharing API is the
memshr tool. This is updated to use the new API.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Adin Scannell <adin@scannell.ca>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
Currently the memshr functions use uint32_t for the domid. This actually leads
to a funny domid_t -> uint32_t -> domid_t sequence of casts. This patch
updates the API functions to be domid_t in the first place.
No tools need to be modified with this patch, the casts were implicit.
Signed-off-by: Adin Scannell <adin@scannell.ca>
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
It's not really any more useful than explicitly setting new M2P
entries to the invalid value.
Signed-off-by: Tim Deegan <tim@xen.org>
Committed-by: Keir Fraser <keir@xen.org>
Instead of sending dirty pages of guest memory as-is, use a simple compression
algorithm that sends a RLE-encoded XOR of the page against its last sent copy.
A small LRU cache is used to hold recently dirtied pages. Pagetable pages are
sent as-is, as they are canonicalized at sender side and uncanonicalized at
receiver.
[ Fixed up a conflict in sg_save_restore.h. I had to increase the
ID values used from -11 and -12 to -12 and -13 because -11 had
been taken by ..._HVM_VIRIDIAN in the meantime. -iwj ]
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Brendan Cully <brendan@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Move (page aligned) buffer allocations in {os}_privcmd_alloc_hypercall_buffer
into a global function xc_memalign. This API is also used by Remus
compression code to allocate compression caches that need to be page aligned.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Brendan Cully <brendan@cs.ubc.ca>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Sandy bridge introduces new MSR to get cc7/pc2 residency (core C-state
7/package C-state 2). Print the cc7/pc2 residency when on sandy bridge
platform.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Committed-by: Keir Fraser <keir@xen.org>
These functions and the xc_gntshr device (/dev/xen/gntalloc on linux)
allow applications to create pages shared with other domains.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Normally, when a userspace process mapping a grant crashes, the domain
providing the reference receives no indication that its peer has
crashed, possibly leading to unexpected freezes or timeouts. This
function provides a notification of the unmap by signalling an event
channel and/or clearing a specific byte in the page.
This also unifies the 3 very similar grant-mapping osdep interfaces into
a single function instead of introducing yet another minor variation.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The toolstack should know how many pages are paged-out at a given point
in time so it could make smarter decisions about how many pages should
be paged or ballooned.
Add a new member to xen_domctl_getdomaininfo and bump interface version.
Use the new member in xc_dominfo_t.
The SONAME of libxc should be changed if this patch gets applied.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Up to now a single ring buffer was used for mem_share, xenpaging and
xen-access. Each helper would have to cooperate and pull only its own
requests from the ring. Unfortunately this was not implemented. And
even if it was, it would make the whole concept fragile because a crash
or early exit of one helper would stall the others.
What happend up to now is that active xenpaging + memory_sharing would
push memsharing requests in the buffer. xenpaging is not prepared for
such requests.
This patch creates an independet ring buffer for mem_share, xenpaging
and xen-access and adds also new functions to enable xenpaging and
xen-access. The xc_mem_event_enable/xc_mem_event_disable functions will
be removed. The various XEN_DOMCTL_MEM_EVENT_* macros were cleaned up.
Due to the removal the API changed, so the SONAME will be changed too.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
.. as there is no need to keep that internal header file anymore.
We export two functions xc_domain_[set|get]_memory_map which
depend on the 'struct e820entry' defined in 'xc_e820.h'.
We move the contents of the 'xc_e820.h' to the 'xenctrl.h' fixing
compiler errors when applications outside the Xen tree are trying
to compile against the libraries.
Tested-by: Daniel Castro <evil.dani@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add these two functions.
The later retrieves the E820 as seen by the hypervisor (completely
unchanged) and the second call sets the E820 for the specified guest.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
* Creates HVMOPs for setting and getting memory access. The hypercalls
can set individual pages or the default access for new/refreshed
pages.
* Added functions to libxc to access these hypercalls.
Signed-off-by: Joe Epstein <jepstein98@gmail.com>
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Tim Deegan <Tim.Deegan@citrix.com>
i.e. not running on a real hypervisor
Allows users of the library to adjust behaviour. I don't especially
like this violation of the abstraction but both oxenstored and xapi
use this to avoid difficult to simulate operations when running on the
simulator.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
The xc_interface previously passed to xc_gnttab_* was only used for
logging which can now be done via the xc_gnttab handle instead.
This makes the interface consistent with the changes made to the main
interface in 21483:779c0ef9682c.
Also update QEMU_TAG to pull in the corresponding qemu change.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This makes the interface consistent with the changes made to the main
interface in 21483:779c0ef9682c.
Also fix some references to "struct xc_interface" which should have
been simply "xc_interface" in tools/xenpaging, and update QEMU_TAG to
pull in the corresponding qemu change.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tim Deegan
Robert Phillips
Daniel De Graaf
Liu Jinsong
Ian Campbell
Andrew Cooper
Wangzhenguo
Dario Faggioli
Keir Fraser
Xudong Hao
Andres Lagar-Cavilla
Stefano Stabellini
Olaf Hering
George Dunlap
Shriram Rajagopalan
Yang Zhang
Olaf Hering
Konrad Rzeszutek Wilk
Wei Liu
Ian Jackson
Joe Epstein