mkheader.py doesn't cope with
struct foo { };
so add a newline.
Define unsigned long and long to a non-existent type on ARM so as to catch
their use.
Teach mkheader.py to cope with structs which are ifdef'd. This cannot cope
with #defines between the #ifdef and the struct definitions, so move
MAX_GUEST_CMDLINE to be next to its only usage.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
I'm not even sure what this thing is. Looks like some sort of Twisted Python
based frontend to xend.
Whatever it is I am perfectly sure no one can be using it. Apart from drive by
build fixes caused by updates elsewhere it has seen no real development since
2005. I suspect it was never even finished/usable.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
I don't think there are any dom0's around whose kernels support only blktap1
and not something newer like blktap2 or qdisk. Certainly not that you would
want to run Xen 4.4 on.
libxl will never use blktap1.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This was apparently a Qt xenstore viewer. It hasn't been touched since it was
first committed in 2007 and I can't beleive anyone is actually using even if
it still happens to work.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We have defaulted to using the system libaio for a while now and I din't think
there are any relevant distros which don't have it that running Xen 4.4 would
be reasonable on.
Also it has caused confusion because it is not ever wanted on ARM, but the
build system doesn't express that (could be fixed, but deleting is the right
thing to do anyway).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
xend has been deprecated for 2 releases now. Lets make it possible to not even
build it.
For now I'm leaving the default of on but I would like to change that before
the 4.4 release.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
There's no need for xl to output these messages on HVM domain creation
to stderr by default.
Change their loglevels from XTL_INFO to XTL_DETAIL; then the messages
output by xl are the same as those for PV domain creation. These
now-silenced messages can still be seen using verbose (-v) mode.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
A recent change in GNU cut disallows use of a newline as a field
delimiter. Avoid the problematic use of cut in vif-bridge.
Signed-off-by: Bob Proulx <bob@proulx.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The return value of vasprintf must be checked. This check is enforced
with the compiler options used in Debian by request and in Ubuntu by
default.
Check the return value and abort on error.
Signed-off-by: Bastian Blank <waldi@debian.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Default builds of Qemu have the Bochs debug port logging #ifdef'd out, so
remove all the completely wasted VMExits
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
The return value from await_ide() is always ignored, and most calls to
await_ide() immediately reread the status register.
Therefore, making await_ide() return the last value of the status register
removes a further two traps on the int 0x13 path.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
So taking two traps when one will do is pointless. This removes 1 of 13
VMExits on the int 0x13 hotpath.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
After issuing a reset, the BSY bit is expected to be set. This is not the
case for Qemu.
In SeaBIOS.git: 580e33293244fee4556e56ecc67b8bd877f3c496
this check was even replaced with a udelay(5), as enough real hardware ignored
the BSY bit as well.
As rombios does not have an equivalent udelay(), replace the wait with a write
to port 0x80 which is whitelisted by Xen for 'a small delay'.
This causes 42k fewer IO traps to Qemu.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Repeated polling of the status register is not going to change its value, so
don't needlessly take 8192 traps to Qemu when 1 will do.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
The parameter determines which, if any, xen-pvdevice is specified on the
QEMU command line. The default value is 'none' which means no argument will
be passed. A value of 'xenserver' specifies a xen-pvdevice with device-id
0xc000 (the initial value in the xenserver namespace - see
docs/misc/pci-device-reservations.txt).
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- s/BUILD_INFO/BUILDINFO for consistency in LIBXL_HAVE define ]
Add a break line in function libxl__domain_resume_device_model
Signed-off-by: Bingheng Yan <rwxybh@126.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
30.07.2013 13:51, Ian Campbell wrote:
> I think it would be a bit less surprising for drive by patchers etc to
> remove the DESTDIR from POLICY_LOADPATH and add it to the install
> target, which is the usual way to do things. Up to you/Vadim though.
Signed-off-by: Vadim A. Misbakh-Soloviov <mva@mva.name>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
add check logic when read from IO ring, and if error happens,
then mark the reading connection as "bad", Unless vm reboot,
oxenstored will not handle message from this connection any more.
xs_ring_stubs.c: add a more strict check on ring reading
connection.ml, domain.ml: add getter and setter for bad flag
process.ml: if exception raised when reading from domain's ring,
mark this domain as "bad"
xenstored.ml: if a domain is marked as "bad", do not handle it.
Signed-off-by: John Liu <john.liuqiming@huawei.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
During the Xen 4.3 release we discussed that this feature could be
turned on by default - as it benefits all of the guests - not just
tmem related.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
New feature to allow xl save to leave a domain paused after its
memory has been saved. This is to allow disk snapshots of domU
to be taken that exactly correspond to the memory state at save time.
Once the snapshot(s) have been taken or whatever, the domain can be
unpaused in the usual manner.
Usage:
xl save -p <domid> <filespec>
Signed-off-by: Ian Murray <murrayie@yahoo.co.uk>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Getting the full Xen version in an easily scriptable way is awkward,
especially if trying to piece together from xen_{major,minor,extra}.
This reflects $(XEN_FULLVERSION) in the build system (but under a more
sensible name, as $(XEN_VERSION) is just the major number).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently cpufreq and xenpm are out of sync. Fix cpufreq reporting of
if turbo mode is enabled or not. Fix xenpm to not decode for tristate,
but a boolean.
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
This in effect copies similar logic from xend: While there's no way to
check whether a device is assigned to a particular guest,
XEN_DOMCTL_test_assign_device at least allows checking whether an
IOMMU is there and whether a device has been assign to _some_
guest.
For the time being, this should be enough to cover for the missing
error checking/recovery in other parts of libxl's device assignment
paths.
There remains a (functionality-, but not security-related) race in
that the iommu should be set up earlier, but this is too risky a
change for this stage of the 4.3 release.
This is a security issue, XSA-61.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This grub.cfg from a default fedora 19 Beta install
caused pygrub failures.The previous pygrub commit
fixed taht. So this example file added for reference.
Signed-off-by: Marcel Mol <marcel@mesa.nl>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Booting a fedora 19 domU failed because a it could not properly
parse the grub.cfg file. This was cased by
set default="${next_entry}"
This statement actually is within an 'if' statement, so maybe it would
be better to skip code within if/fi blocks...
But this patch seems to work fine.
Signed-off-by: Marcel Mol <marcel@mesa.nl>
Acked-by: Ian Campbell <ian.campbell@citix.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The regex was not selecting the { when parsing JSON output of xl list -l.
It was also not selecting (domain when parsing xl list -l when SXP selected.
Pefixed { with 4 spaces, and removed an extra ( before domain in the regex
string
Added quotes around the grep strings so the spaces inserted into the string
didn't not break the grepping.
This has now been tested against 4.3RC5
Signed-off-by: Ian Murray <murrayie@yahoo.co.uk>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
XSA-55 has exposed errors for guest creation on ARM:
- domain virt_base was not defined;
- xc_dom_alloc_segment allocates pfn from 0 instead of the RAM base address.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Commit 5420f265 has some misplaced parenthesis that caused devid
to be assigned 1 or 0 based on checking return value of
libxl__device_nextid < 0, e.g.
devid = libxl__device_nextid(...) < 0
This works when only one instance of a given device type exists, but
subsequent devices of the same type will also have a devid = 1 if
libxl__device_nextid succeeds. Fix by checking the value assigned to
devid, e.g.
(devid = libxl__device_nextid(...)) < 0
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Ian Campbell
Matthew Daley
Bob Proulx
Andrew Cooper
Bastian Blank
Paul Durrant
rwxybh
Vadim A. Misbakh-Soloviov
=John Liu
George Dunlap
Konrad Rzeszutek Wilk
Ian Murray
Kjetil Torgrim Homme
Jan Beulich
Marek Marczykowski
Jacob Shin
Ian Jackson
Vincent Bernardoff
Frediano Ziglio
Marcel J.E. Mol
Anthony PERARD
Julien Grall
Jim Fehlig