so that we don't corrupt E820_RAM memory with stack ops in S3 wakeup.
It has to move up so the lowest contiguous RAM area is >= 512MiB.
This relies on the previous fix to let DS != SS
Signed-off-by: Paul Durrant <Paul.Durrant@citrix.com>
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
...because the default timesource (TSC) drifts under load.
The flag is only defined in ACPI 3.0, and we provide ACPI 2.0 tables,
but Windows seems happy enough to obey it anyway.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
When graphics card is assigned to a guest as a secondary VGA,
without gfx_passthru and emulated VGA is the primary VGA,
hvmloader misreads gfx_passthru is specified if VGA device is
found after the emulated VGA.
This patch fix this issue. If emulated VGA is found, hvmloader
preserves it and loads vgabios of the emulated VGA.
Signed-off-by: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
Fix an ACPI asl bug by explicitly convert PRS to buffer, otherwise PRS
would be parsed as integer if less than 32/64 bits (according to ACPI
1.0 or 2.0).
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Move processor from \_PR to \_SB. ACPI processor can be defined
under \_PR or \_SB. However, recently os like linux 2.6.30/32 support
cpu hotplug better for \_SB processor object.
Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Make build.c dependency on ssdt_{pm,tpm}.h explicit, else they can be
built in the wrong order.
Also, improve naming of target DSDT structures, and specify -p option
to iasl so that all generated files for a given target have
target-unique names, hence build can proceed safely in parallel.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Deploy this smaller DSDT where possible: this is required to boot
Windows 2000, which only supports up to 15 processors and will blue
screen if it sees more processor objects than that (even inactive
ones).
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
It's big and small changes generate huge diffs. People building the
firmware will have to ensure they have iasl installed.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
By merging PRSC and NTFY methods we simplify the code, improve
efficiency, and fix a bug where PRSC iterated 0-255 but NTDY could
only handle CPU numbers 0-127.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Fix it by telling OSPM don't power down vga card on entering S3
state. The trick works for XP and Windows2003, but Vista still refuse
to allow S3.
It is picked from kvm-userdapce.git commit 60e85d, author "Gleb
Natapov".
Signed-off-by: Yu Ke <ke.yu@intel.com>
accordingly
-- currently firmware has got 'vcpus' from xend, this patch add parse
'vcpu_avail' to firmware;
-- setup madt 'lapic' subitems of processors accoring to vcpus and
vcpu_avail which finally come from config;
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
In order to support HVM vcpu add/remove, we need set dsdt
infrastructure.
-- By using mk_dsdt.c, it auto-produce related asl code when
compiling.
-- It define processor related objects and control methods (_MAT,
_EJ0, _STA, etc).
-- It also define GPE _L02 and Notify control method for SCI
interrupt, which will trigger HVM acpi driver to add/remove cpu.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
At the same time, replace a lengthy linear GPE notification method,
with a logarithmic binary chop. Based on a patch by Simon Horman.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Microsoft's Windows logo certified hardware requires ECC; since the
SVVP certification runs the same test on the guest, Xen domains will
currently fail it.
From: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
This patch supports basic gfx passthrough on xen side:
- add a VGA type for gfx passthrough, and get the size of VGA bios
of passthrouged gfx in hvmloader
- add a config option 'gfx_passthru' for gfx passthrough
Signed-off-by: Ben Lin <ben.y.lin@intel.com>
Signed-off-by: Weidong Han <weidong.han@intel.com>
This patch adds the ACPI fixed hardware power button for HVM.
It enables a graceful shutdown of a guest OS by direction of Dom0.
(if a proper action for the power button is set inside the guest)
usage:
xm trigger <Domain> power
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
Now there are two control registers plus one register for
each of the 32 PHP slots. A total of 34 registers. Accordingly the
ioport space required has expanded by from 3 to 34 bytes.
Signed-off-by: Simon Horman <horms@verge.net.au>
hvmloader acpi: Use If and Else instead of Switch
Signed-off-by: Simon Horman <horms@verge.net.au>
This gets rid of shenanigans with relocating the jump table around the
place.
Also clean up bios_info table while we are updating it.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Since it is a build prerequisite (in some cases) simply fail the build
if it is not found when it turns out to be required. Just as we would
for any other tool-chain prereq.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
dev_memsize ends up 0 when it shouldn't be on 16G boundary conditions.
Signed-off-by: Bill Rieske <brieske@novell.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
If you use -MMD -MF then the correct .o filename is written to the
.*.d file as the compiler driver arranges everything. This was done
in 19010:275abe1c5d24 for the hypervisor.
In this patch we do the same elsewhere in the xen-unstable tree,
particularly tools/. Specifically:
* Change tools/Rules.mk to add -MMD -MF ... to CFLAGS and set DEPS.
* Remove -Wp,-MD... from every other Makefile
* Remove setting of DEPS from every other Makefile
* Ensure that every Makefile says -include $(DEPS)
* Ensure that every Makefile's clean target removes $(DEPS)
Some Makefiles were already halfway there, but often for a different
variable name eg PROG_DEP. The variable name is now standardised in
Rules.mk as DEPS.
I have done a test build with this change, on Debian etch.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
To make memory management easier in hvmloader, defer building a
generic E820 map until the end of hvmloader bootstrap.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
hvm_info_table to describe memory parameters in a simpler form from
domain builder to hvmloader.
Also move reserved special page mappings immediately below the 4GB
boundary.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Keir Fraser